AWIN AW-EB920 Manuel utilisateur
Ni-MH Electric Bike
OPERATION MANUAL
AW-EB920
Environmentally
Friendly
World's Best
I. Table of Contents 1
II. 2
III.
Product Features
Specifications 4
IV. Parts and Components 5
V. Usage 6
VI. Installation 7
VII. Charge Method 9
VIII. Check before Riding 12
IX. Riding Instructions 14
X. Maintenance and Repair 15
XI. Troubleshooting 16
Table of Contents
-1-
AWIN TECHNOLOGYCORP.
Dual SystemDual System
High Power Ni-MH BatteryHigh Power Ni-MH Battery
Ni MHNi MH
POWER
INSIDE
Traditional Bike Electrical Bike
A 100% electrically motor-driven
system and a power-assisted
system (PEDELEC) are interchangeable.
(E-bike)
A high power, long life cycle rechargeable
Ni-MH battery is specially designed to be
safe and environmentally friendly by
eliminating the use of the toxic materials-
lead & cadmium.
Product Features
-2-
AWIN TECHNOLOGYCORP.
Product Features
Safe
-3-
AWIN TECHNOLOGYCORP.
Comfortable Powerful
Light
Fast
Charge
Smart
Auto
6 seconds activating buffer
By applying the brake for 6 seconds, it is in order to start the safety mechanism for riding.
Portable battery pack
The portable batter pack is exchangeable and convenient. It can be recharged at any place
with regular AC110/220V power source, and guarantees fast charge and less weight.
Electric control grip
The motor is initiated by the handle, similar to a scooter, truly natural design.
Safety shut-off power device
Safety protection device automatically shuts off power when stopping operation over
3 minutes or applying the break.
Battery capacity indicator
3-level power indicator shows you the remaining power anytime so you know when
should recharge the battery.
Specifications
Dimensions 1,650mm(overall length) 550mm(overall width)
780~940mm(saddle height)
Distance between axles(wheelbase) 1,050mm
Tire size 24"
Weight of vehicle About 27 kg
Limitation of load 100 Kgs
Range of assisted speed 0 ~ 25 km/h
Running distance of run on 1 full charge 20 ~ 50 km [*]
Maximum speed 25 km/h
Motor type Direct current with brushes
Rated output 180W
Control system PWM controlling type
Power drive Chain
Battery type High Performace, high power Ni-MH Battery
Battery Capacity 24V 8Ah or 24V 12Ah
Charging time 2~3 hours [**]
[*] The running distance may vary depending on road condition, weight load, electrical system chosen
and battery capacity used.
[**] Use of AWIN's high quality quick charger is required.
-4-
AWIN TECHNOLOGYCORP.
Specified Battery pack and ChargerSpecified Battery pack and Charger
The battery pack may be broken or not function well if the battery pack and charger do not
collaborate with each other. Therefore, please use the charger exclusively developed by
AWIN for the battery of the bike. 110V or 220V Ac power shall be used for charging and
it usually takes 2~3 hours to complete a fully charge.
Rear brake
Kickstand
Carrier
Front brake
Chain Cover
Lock
Controller
Reflector
Pedal
Quick lever
Bell
Saddle
Motor
Mudguard
Battery Pack
Handle Bar
Break lever
Basket
Tire
Rim
Parts and Components
Speed control throttle
-5-
AWIN TECHNOLOGYCORP.
Usage The user shall not modify or dismantle any parts or
components of the electric bike (including chain cover,
battery pack, motor, charger, etc.) to avoid danger.
The user shall not modify or dismantle any parts or
components of the electric bike (including chain cover,
battery pack, motor, charger, etc.) to avoid danger.
Prohibitions
1.Age below 14 are not allowed to ride the electric bike for the sake of safety.
2.It is not allowed to ride the same electric bike by two riders simultaneously.
3.A helmet and other appropriate protection equipment shall be worn
when riding the electric bike.
4.When any abnormality occurs, don't ride the electric bike any more.
5.Don't ride the electric bike in darkness or adverse weather conditions.
6.Don't ride the electric bike when the road is wet, sliding, contaminated
with mud or oil, or in other bad conditions.
7.Don't ride the electric bike when you don't feel well or are drunk.
8.Don't operate the power switch during the riding to avoid danger.
9.Don't ride the electric bike with one hand only.
10.Don't overload the electric bike (max. 3 kg for the front basket,
while 10 kg for the rear carrier).
11.Keep the electric bike within the safe distance and speed to avoid danger
when riding downhill.
12.Use the front and rear brakes simultaneously for power braking.
13.Park the electric bike on an even road section. Don't park it on the slope.
-6-
AWIN TECHNOLOGYCORP.
Fix the setscrews at
points A, B and C.
B
A
C
vInstall pedals:
xInstall baskets:
uFix the handles:
wAdjust theseat:
yInstall BatteryPack:
Installation
Fix the handles with a hexagon wrench.
Fix the right(turn clockwise) and left(turn
anticlockwise) pedals with the setscrews.
2.Assembly2.Assembly
1.Unpack1.Unpack
Battery Pack Holder Padlock
Quick Lever
Take the power socket of controller
to plug in the connector of battery
pack. And lock the padlock of carrier.
Please check all of the components in carton including a electric bike,
a battery pack, a charger, a basket, a set of pedals, a set of installation
kits and user manual.
Release the Quick Lever and adjust to an
appropriate height what you desire and
press it tightly.
-7-
AWIN TECHNOLOGYCORP.
A. Power Assisted Mode (PEDELEC)
B. 100% Electric Mode (E-Bike)
Installation
Turn on the power switch, and hold on the lever for more than 6 seconds
, then sit on the seat and stamp the foot pedals to ride the electric bike in
Power Assisted Mode.
Turn on the power switch, and hold on the lever for more than 6 seconds
, then sit on the seat and turn the speed control throttle to ridethe electric
bike in Electric Mode .100%
3.Trial Riding3.Trial Riding
FULL
HALF
EMPTY
Notes of installing the battery pack
1
2. You must plug the battery pack socket into the connector of the controller b
3. Please keep the key of padlock carefully for fear of your inconvenient.
4. Before you want to take out the battery pack,p
. When you put the battery pack into rear carrier, please keep the pack holder upside,
and make sure whether the position of battery pack is correct or not.
efore
turning on the power switch.
eel off the connection between the
battery pack and controller.
-8-
AWIN TECHNOLOGYCORP.
Charge Method
Only use the qualified charger designed
exclusively for the battery pack.
he indicator will turn to green when the
charging is completed,
Repeated charging shall be avoided
because it may shorten the service life
of the battery.
charger away from
children.
T
Always keep the
Attentions
Two standard battery-charging approaches are available:
Keep the battery pack away from
any place where firing may occur,
including fire source, smoking
area, high temperature area,
adverse ventilation area, etc.)
Charge the battery at a place with
good ventilation and no direct
exposure in the sun.
Keep away from fire
Guard against electric shock
Do not charge the battery pack in
a wet environment especially in
a rainy day.
1.Attentionswhen chargingthebattery pack
Battery pack
Battery pack
Charger
B. Off-bike charging
A. On-bike charging
-9-
AWIN TECHNOLOGYCORP.
Table des matières
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur