Avtech KPC132 Manuel utilisateur
224Z
K132Z_V0.9
USER MANUAL
Best Selling Camera Series
The product image may differ from the actual product.
Please read the instructions thoroughly before using the product.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ROHS Announcement
All lead-free products offered by the company comply with the requirements of the European law on the
Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and
products are strictly “lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected
seperately at the product end-of-life. This applies to your product and any peripherals marked with this
symbol. Do not dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference.
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to
revise or remove any content in this manual at any time.
C
CA
AU
UT
TI
IO
ON
N:
:
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we have been
advised of the possibility of such damages.
C
C
A
A
U
U
T
T
I
I
O
O
N
N
R
RI
IS
SK
K
O
OF
F
E
EL
LE
EC
CT
TR
RI
IC
C
S
SH
HO
OC
CK
K
OVERVIEW
This small and exquisite dome camera incorporates a standard resolution color
CCD and can be easily installed in any indoor environment.
FEATURES
1. Standard horizontal resolution and high quality picture
2. Built in Auto Electronic Shutter
3. Minimum illumination of 0.4 Lux / F2.0
4. Small and exquisite
SPECIFICATION*
M
MO
OD
DE
EL
L
K
KP
PC
C1
13
32
2
Pick up Element 1/3" Color CCD image sensor
Number of Pixel 512(H) x 492(V) <NTSC> / 512(H) x 582(V) <PAL>
Resolution 420 TVL
Minimum illumination 0.4 Lux / F2.0
S/N Ratio More than 48dB (AGC off)
Electronic Shutter 1/60 (1/50) to 1/100,000 sec.
Lens f3.6mm / F2.0
Lens Angle 92.6˚
IRIS Mode AES
Gain Control Auto
White Balance ATW
Video Output 1.0Vp-p composite, 75Ω
Power Source (±10%) DC12V
Current Consumption (±10%) 110mA
Dimension (mm) 100(Ø ) × 60(H)
* The specifications are subject to change without notice.
** Dimensional Tolerance: ± 5mm
PACKAGE CONTENT
‧ Camera x 1
‧ User manual x 1
‧ Power and Video Cable x 1
INSTALLATION * The product image may be different from the actual product.
1. Turn “Dome Cover” counterclockwise to the end and take it off.
2. Mark the positions of one “power and video line hole” and four “screw holes” on the ceiling.
Drill a hole on the proper position of the ceiling for the power and video line to pass through.
And then screw “base” to the ceiling.
Note: Screws for installation are not supplied within the sales package.
Please prepare by yourself and use proper screws.
Suggestions:
a) For safety, please let the power and video line concealed behind the ceiling.
b) If the installation spot doesn’t allow the installation personnel to screw power and video line hole on the
ceiling, they could cut the concave edge of “base” to let the power and video line pass through. Be
sure to cover the line to prevent violent attack.
3. Adjust the view angle of the lens. Then put “dome cover” back to the “base” and turn clockwise.
CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a 12V DC regulated power supply.
Note: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power tolerance of
this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output and the monitor video input with 75Ωcoaxial cable.
Dome Cover
Power & Video
Line Hole
4 Screw Holes
Table des matières
Autres manuels Avtech Caméra de sécurité
Avtech
Avtech AVT1206A Manuel utilisateur
Avtech
Avtech DG104A Manuel utilisateur
Avtech
Avtech AVM5447 Manuel utilisateur
Avtech
Avtech AVI321 Manuel utilisateur
Avtech
Avtech 22X series Manuel utilisateur
Avtech
Avtech DGC5205T Manuel utilisateur
Avtech
Avtech AVT543 Manuel utilisateur
Avtech
Avtech Ezum DGC1306 Manuel utilisateur
Avtech
Avtech AVM328 Manuel utilisateur
Avtech
Avtech IM-132E Manuel utilisateur
Avtech
Avtech AVM302A Manuel
Avtech
Avtech AVT1206TP Manuel utilisateur
Avtech
Avtech KPC131D Manuel utilisateur
Avtech
Avtech AVI322 Manuel utilisateur
Avtech
Avtech DG104 Mode d'emploi
Avtech
Avtech YGN2003 Manuel utilisateur
Avtech
Avtech MEGAPIXEL WIRELESS NETWORK CAMERA SERIES Manuel utilisateur
Avtech
Avtech IC-AVM2421 Manuel utilisateur
Avtech
Avtech DGC1104XFT Manuel utilisateur
Avtech
Avtech DGC5205TSE Manuel utilisateur
