Avocent MPU1016-001 Instructions d'installation et d'entretien

MERGEPOINT UNITY® SWITCH

Installer/User Guide

European Union Notification

WARNING: This is a class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate measures.

USA Notification

WARNING: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the user will be required to correct

the interference at his/her own expense.

Canadian Notification

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Japanese Notification

Korean Notification

MergePoint Unity® Switch

Installer/User Guide

Avocent, the Avocent logo, The Power of Being There, MergePoint Unity,

DSView and Dambrackas Video Compression are registered trademarks of

Avocent Corporation or its affiliates in the U.S. and other countries. All other

marks are the property of their respective owners.

Instructions

This symbol is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

Dangerous Voltage

This symbol is intended to alert the user to the presence of uninsulated dangerous

voltage within the product’s enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

Power On

This symbol indicates the principal on/off switch is in the on position.

Power Off

This symbol indicates the principal on/off switch is in the off position.

Protective Grounding Terminal

This symbol indicates a terminal which must be connected to earth ground prior to

making any other connections to the equipment.

T A B L E  OF  C O N T E N T S

Product Overview 1

Features and Benefits 1

Reduce cable bulk 2

KVMswitching capabilities 2

True serial capabilities 2

Local and remote user interfaces 2

Control of virtual media and smart card-capable appliances 2

Access the MergePoint Unity switch via a standard TCP/IP network 3

DSView 3 management software plug-in 3

Sample Configuration 4

Installation 5

MergePoint Unity Switch Connectivity 5

Getting started 7

Setting up your network 8

Rack Mounting a MergePoint Unity Switch 8

Rack mounting safety considerations 8

Connecting the MergePoint Unity Switch Hardware 9

Cascading MergePoint Unity Switches 11

Configuring the MergePoint Unity Switch 12

Setting up the built-in web server 12

Connecting to the OBWI through a firewall 12

Verifying the Connections 14

Front and rear panel Ethernet connection LEDs 14

Front panel status LEDs 14

Rear panel power status LEDs 14

IQ and DSRIQ-SRL modules 15

Adjusting Mouse Settings on Target Devices 15

Local and Remote Configuration 17

The User Interfaces 17

Local UI 17

iii

OBWI 18

Using the user interfaces 19

Viewing System Information 22

MergePoint Unity Switch Sessions 23

Launching a session 23

Configuring sessions 23

Closing a session 24

MergePoint Unity Switch Appliance Tools 24

Rebooting the MergePoint Unity switch 25

Upgrading the MergePoint Unity switch firmware 25

Saving and restoring appliance configurations and appliance user databases 26

Network Settings 27

DNSSettings 28

Local UI Settings 28

Local port user settings 28

Virtual Media 29

Local virtual media settings 30

Modem Settings 31

Scan Mode 31

DSView 3 Server IP Addresses 32

User Accounts 32

Managing local accounts 32

Access levels 32

SNMP Settings 34

Event Settings 34

Setting Event Destinations 35

Configuring IQ Modules 35

Upgrading IQ modules 36

Power Device Settings 36

The Video Viewer 39

iv MergePoint Unity® Switch Installer/User Guide

The Video Viewer Window 39

Changing the toolbar 41

Launching a Session 42

Session time-out 42

Window Size 42

Adjusting the View 43

Refreshing the Image 44

Video Settings 44

Additional video adjustment 44

Target video settings 46

Automatic video adjustment 46

Video Test Pattern 46

Vendor-specific video settings 46

Color Settings 47

Adjusting Color Depth 47

Contrast and brightness 47

Noise Settings 47

Detection thresholds 47

Block Noise Threshold and Pixel Noise Threshold 47

Mouse Settings 48

Adjusting mouse options 48

Cursor type 48

Mouse scaling 50

Mouse alignment and synchronization 51

Avocent Mouse Sync 51

Virtual Media 52

Requirements 52

Sharing and preemption considerations 52

Virtual Media dialog box 53

Opening a virtual media session 53

Table of Contents v

Closing a virtual media session 56

Smart Cards 56

Keyboard Pass-through 57

Macros 58

Saving the View 58

Closing a Session 58

LDAP 59

Configuring LDAP in the User Interface 59

LDAP Overview parameters 59

LDAP Search parameters 60

LDAP Query parameters 61

Appliance and Target Device Query Modes 62

Setting up Active Directory for Performing Queries 65

Appendix A: Terminal Operations 67

Appendix B: Using Serial IQ Modules 69

Appendix C: UTP Cabling 75

Appendix D: Cable Pinout Information 78

Appendix E: Technical Specifications 80

Appendix F: Sun Advanced Key Emulation 84

Appendix G: Technical Support 87

vi MergePoint Unity® Switch Installer/User Guide

Product Overview

Features and Benefits

The Avocent MergePoint Unity® KVM over IP and serial console switch combines analog and

digital technology to provide flexible, centralized control of data center servers and virtual

media, and to facilitate the OA&M (operations, activation and maintenance) of remote branch

offices where trained operators may be unavailable. The IP-based MergePoint Unity switch gives

you flexible target device management control and secure remote access from anywhere at

anytime.

The MergePoint Unity switch provides enterprise customers with the following features and

options:

• significant reduction of cable volume

• keyboard, video and mouse (KVM) capabilites, configurable for analog (local) or digital

(remote) connectivity

• true serial capability through Secure Shell (SSH) and Telnet

• enhanced video resolution support, up to 1600 x 1200 or 1680 x 1050 (wide-screen) native

from target to remote

• optional dual power models for redundancy

• optional support for managing intelligent power devices

• virtual media capability accessed through USB ports

• dual independent local port video paths (dedicated to ACI)

• dual stack IPv4 (DHCP) and IPv6 (DHCPv6 and auto configuration) for simultaneous access

• smart card capability

• accessibility to target devices across 10/100 or 1000BaseT (some models) LAN port(s)

• a MODEM port that supports V.34, V.90 or V.92-compatible modems that may be used to

access the switch when an Ethernet connection is not available

Reduce cable bulk

With server densities continually increasing, cable bulk remains a major concern for network

administrators. The MergePoint Unity switches significantly reduce KVM cable volume in the

rack by utilizing the innovative IQ module and single, industry-standard Unshielded Twisted

Pair (UTP) cabling. This allows a higher server density while providing greater airflow and

cooling capacity.

KVMswitching capabilities

The MergePoint Unity switch supports IQmodules, which are powered directly from the target

device and provides Keep Alive functionality when the switch is not powered. The following

IQ modules are supported:DSRIQ-PS2, DSRIQ-USB, DSRIQ-VMC, DSRIQ-SUN, DSAVIQ-

USB2 DSAVIQ-PS2M and MPUIQ-VMC modules. The DSAVIQ-USB2, DSAVIQ-PS2M

DSRIQ-VMC and MPUIQ-VMC modules are virtual media-capable. The DSRIQ-VMC and

MPUIQ-VMC modules are also smart card-capable.

True serial capabilities

The MergePoint Unity switch supports the MPUIQ-SRL module, which provides true serial

capabilities through Telnet. You can launch an SSHsession or launch a serial viewer from the

on-board web interface (OBWI) to connect the MergePoint Unity switch's attached target

devices that have an MPUIQ-SRL module.

Local and remote user interfaces

You can use the local user interface (local UI) by connecting directly to the local port to

manage the MergePoint Unity switch. You can also use the remote OBWI to manage your

switch system. The OBWI is web-browser based and is launched directly from the switch, and

any servers connected to the MergePoint Unity switch are automatically detected. The two user

interfaces share a similar look and feel for an optimal user experience.

Control of virtual media and smart card-capable appliances

The MergePoint Unity switches allow you to view, move or copy data located on virtual media

to and from any target device. Manage remote systems more efficiently by allowing operating

system installation, operating system recovery, hard drive recovery or duplication, BIOS

updating and target device backup.

The MergePoint Unity switches allow you to use smart cards in conjunction with your

MergePoint Unity switch system. Smart cards are pocket-sized cards that store and process

2MergePoint Unity® Switch Installer/User Guide

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Avocent Changer

Avocent

Avocent DSR Series DSR1010 Mode d’emploi

Avocent

Avocent AutoView 2020 Instructions d'installation et d'entretien

Avocent

Avocent AMX5000 Manuel utilisateur

Avocent

Avocent SwitchView 130 Manuel utilisateur

Avocent

Avocent AMX5000 Manuel utilisateur

Avocent

Avocent SwitchView 1000 Instructions d'installation et d'entretien

Avocent

Avocent AutoView 2030 Manuel utilisateur

Avocent

Avocent DSR SWITCH - Instructions d'installation et d'entretien

Avocent

Avocent SwitchView SC4 UAD Manuel utilisateur

Avocent

Avocent AMX5000 Manuel utilisateur

Avocent

Avocent AMX5000 Manuel utilisateur

Avocent

Avocent SwitchView SC8 DVI Manuel utilisateur

Avocent

Avocent SWITCHVIEW PC Manuel utilisateur

Avocent

Avocent ESP-4 MI Instructions d'installation et d'entretien

Avocent

Avocent DSR Series DSR1021 Instructions d'installation et d'entretien

Avocent

Avocent SwitchView SC4 UAD Manuel utilisateur

Avocent

Avocent SwitchView SC120 Manuel utilisateur

Avocent

Avocent AMX5000 Manuel utilisateur

Avocent

Avocent SwitchView Manuel utilisateur

Avocent

Avocent DSR SWITCH - Instructions d'installation et d'entretien

Avocent

Avocent AMX 5130 Manuel utilisateur

Avocent

Avocent SwitchView SC540 Manuel utilisateur

Avocent

Avocent DSR Series DSR1020 Instructions d'installation et d'entretien

Avocent

Avocent Cybex SwitchView SC8 DVI Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur