Avocent DSR SWITCH - Instructions d'installation et d'entretien

Installer/User Guide

For models: DSR800 DSR1010 DSR2010 DSR4010

DSR™

INSTRUCTIONS

This symbol is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

DANGEROUS VOLTAGE

This symbol is intended to alert the user to the presence of uninsulated

dangerous voltage within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

POWER OFF

This symbol indicates the principal on/off switch is in the off position.

POWER ON

This symbol indicates the principal on/off switch is in the on position.

PROTECTIVE GROUNDING TERMINAL

This symbol indicates a terminal which must be connected to earth ground

prior to making any other connections to the equipment.

Avocent, the Avocent logo, The Power of Being There, DSR,

OutLook, AutoView, DSView and OSCAR are trademarks or

registered trademarks of Avocent Corporation or its affiliates. All

other marks are the property of their respective owners.

DSR™

Installer/User Guide

USA Notification

Warning: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Canadian Notification

This digital apparatus does not exceed the Class A limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the Canadian

Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les

limites applicables aux appareils numériques de la classe A prescrites dans le Règlement

sur le brouillage radioélectrique édicté par le Ministère des Communications du Canada.

Japanese Approvals

Taiwanese

BSMI Certification

Korean Certification

Director General of Radio Research Laboratory, Ministry of Information and

Communication, Republic of Korea Certificate of Information and Communication

Equipment E-E011-02-2836 (A) and E-E011-03-2392 (A)

Agency Approvals

EN55022 Class A, EN55024, EN6200-3-2, EN6100-3-3, FCC15 Class A, VCCI Class A,

IEC950, EN60950, UL 1950 third edition, CSA C22.2 No. 950

Table of Contents

Chapter 1: Product Overview

Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Chapter 2: Installation

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing the DSR Appliance . . . . . . . . . . . . . . . . . 13

Chapter 3: Local Port Operation

Controlling Your System at the Local Port . . . . . . 23

Viewing and Selecting Ports and Servers . . . . . . . . 23

Navigating OSCAR . . . . . . . . . . . . . . . . . . . . . . . . . 25

Configuring OSCAR . . . . . . . . . . . . . . . . . . . . . . . . 27

Assigning Device Types . . . . . . . . . . . . . . . . . . . . . . 29

Changing the Display Behavior . . . . . . . . . . . . . . . 31

Controlling the Status Flag . . . . . . . . . . . . . . . . . . . 33

Broadcasting to Servers . . . . . . . . . . . . . . . . . . . . . . 34

Using Scan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Setting Console Security . . . . . . . . . . . . . . . . . . . . . 38

Setting the Keyboard Country Code . . . . . . . . . . . . 41

Managing Server Tasks Using OSCAR . . . . . . . . . 42

Viewing and Disconnecting User Connections . . . 44

Resetting Your PS/2 Keyboard and Mouse . . . . . . 45

Displaying Version Information . . . . . . . . . . . . . . . 46

Chapter 4: Terminal Operations

Accessing the Terminal Applications Menu . . . . . . 51

Appendices

Appendix A: FLASH Upgrades . . . . . . . . . . . . . . . . 57

Appendix B: Using DSRIQ-SRL Modules . . . . . . . 61

Appendix C: UTP Cabling . . . . . . . . . . . . . . . . . . . 66

Appendix D: Technical Specifications . . . . . . . . . . 68

Appendix E: Sun Advanced Key Emulation . . . . . 70

Appendix F: Technical Support . . . . . . . . . . . . . . . 72

Contents

Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Product Overview

Chapter 1: Product Overview 3

Chapter 1: Product Overview

Features and Benefits

Avocent’s DSR™appliances combine analog and digital technology to provide

flexible, centralized control of data center servers. This solution provides

enterprise customers with a significant reduction of cable volume, secure

remote access and flexible server management from anywhere at anytime.

The DSR appliance consists of a rack mountable keyboard, video and mouse

(KVM) switch configurable for analog (local) or digital (remote) connectivity.

Each DSR model has Avocent Rack Interface (ARI) ports for connecting

servers and serial devices via DSRIQ modules. Video resolution of 1280 x 1024

is supported for remote users of the DSR system. Enhanced video quality of

up to 1600 x 1280 is available for the local user via the keyboard, video and

mouse ports.

The DSR works over standard LAN connections. Users can access servers (or

serial devices) across a 100BaseT Ethernet connection or directly through a

local port on the DSR for remote KVM access and administration, depending

on the model selected. The IP-based DSR appliance gives you flexible server

management control from anywhere in the world.

Reduce cable bulk

With server densities continually increasing, cable bulk remains one of the

major concerns of every network administrator. The DSR significantly reduces

KVM cable volume in the rack by utilizing the innovative DSRIQ module and

single CAT 5 cabling. This allows a higher server density while providing

greater airflow and cooling capacity.

The built-in memory of the DSRIQ simplifies configuration by assigning

and retaining unique server names or Electronic ID (EID) numbers for

each attached server. This integrated intelligence enhances security and

prevents unauthorized access to a server through cable manipulation. The

DSRIQ module is powered directly from the server and provides Keep Alive

functionality whether or not the DSR appliance is powered up.

The DSRIQ-SRL (serial) module is a DCE device that provides the primary

interface between a serial device and a DSR appliance. It provides VT100

terminal emulation, break suppression and port history in a convenient

module. The DSRIQ-SRL is compatible with the ARI port of a DSR system.

These DSRIQ modules eliminate the need for extra rack space or additional

cables. The connection between the DSR system and DSRIQ modules is via

industry standard UTP cabling.

4DSR Installer/User Guide

Access the DSR via network connection

No special software or drivers are required on the attached, or host, computers.

Users access the DSR appliance and all attached systems via Ethernet from a

PC running the DSViewTM application residing on the user PC. User PCs can be

located anywhere a valid network connection exists. The DSR appliance can

be configured on a separate network from your data network, allowing access

to your servers even if your applications network is down.

Simple point and click access to any server

When a user activates DSView, it will display a listing of all computers and

serial devices to which the user has permission to access. When a user selects

a computer from the list, the video of the selected computer is displayed in a

session window. Multiple servers can be accessed by one user. Each additional

computer’s video will appear in a separate program window.

Create and manage user permissions with DES

encrypted security

An administrator describes the configuration of computers attached to the DSR

using an application called DSAdmin. Once the topology is described, the

administrator then establishes which computers a user has permission to

access. Usernames and passwords are derived from Windows NT®, eliminating

the need for redundant user databases. Once the topology is established, the

DSAuth software manages the system’s user permissioning. DSView polls the

server running DSAuth for access permissions on power up and every time a

switch is initiated for the most current permissions possible. A refresh is also

available for immediate updates to a user’s access profile. In addition to the

permissioning function, DSAuth also stores pertinent information about

attached devices in a database. Room location, rack location and computer

type can all be stored for quick reference.

Access serial devices

If an Avocent CPS810 or CPS1610 appliance is attached to the DSR unit,

operators can gain access to serial devices through the DSView software. When

a user connects to the network using DSView, a listing of all computers and

serial devices to which the user has permission to access displays. Selecting a

serial device will initiate a Telnet session.

Autres manuels pour DSR SWITCH -

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Avocent Changer

Avocent

Avocent CPS1610 Instructions d'installation et d'entretien

Avocent

Avocent DSR Series DSR1020 Mode d’emploi

Avocent

Avocent DSR Series DSR4160 Manuel utilisateur

Avocent

Avocent AUTOVIEW 3008 Instructions d'installation et d'entretien

Avocent

Avocent ESP Multi-Interface Serial Hub SuperSerial Manuel utilisateur

Avocent

Avocent DSR Series DSR1020 Manuel utilisateur

Avocent

Avocent Outlook 180DX Instructions d'installation et d'entretien

Avocent

Avocent DSR Series DSR1031 Mode d’emploi

Avocent

Avocent SwitchView SC8 DVI Manuel utilisateur

Avocent

Avocent Single port KVM over IP switch Manuel utilisateur

Avocent

Avocent DS1800 Manuel utilisateur

Avocent

Avocent SwitchView SwitchView IC Manuel utilisateur

Avocent

Avocent AMX Switch Series Manuel utilisateur

Avocent

Avocent switchview 100 Manuel utilisateur

Avocent

Avocent AMX5000 Manuel utilisateur

Avocent

Avocent SwitchView SwitchView 1000 Manuel utilisateur

Avocent

Avocent SwitchView 100 Series Manuel utilisateur

Avocent

Avocent AutoView 1415 Manuel utilisateur

Avocent

Avocent SwitchView IP 1020 Manuel utilisateur

Avocent

Avocent SwitchView SC420 Manuel utilisateur

Avocent

Avocent DSR Series DSR4030 Manuel utilisateur

Avocent

Avocent SC 1x4 Manuel utilisateur

Avocent

Avocent AutoView 2020 Manuel utilisateur

Avocent

Avocent Cybex SwitchView SC8 DVI Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur