AVLink IC-714AUHR Manuel utilisateur
HDMI SWITCH IC-714AUHR
- 1 -
HDMI SWITCH IC-714AUHR
- 2 -
CAUTION
Follow all instructions marked on the device during using.
Provide proper ventilation and air circulation and do not use near water.
It is better to keep it in a dry environment.
Place the device on a stable surface (example cart, stand, table, etc.).
The system should be installed indoor only. Install either on a sturdy rack or desk in a
well-ventilated place.
Make sure the rack is level and stable before extending a device from the rack if
necessary.
Make sure all equipments installed on the rack including power strips and other
electrical connectors are properly grounded.
Only use the adapter (DC 12V) supported with the device.
Do not use liquid or aerosol cleaners to clean the device.
Always unplug the power to the device before cleaning.
Unplug the power during lightning or after a prolonged period of non-use to avoid
damage to the equipment.
Do not stand on any device while installing the device to the rack.
Do not attempt to maintain the device by yourself, any faults, please contact your
vendor.
Save this manual properly for future reference.
Copyright and Trademarks
All rights reserved by AV LINK GROUP LTD. No part of this document may be
reproduced in any form or by any means without written permission from the product
manufacturer. Changes are periodically made to the information in this document.
They will be incorporated in subsequent editions. The product manufacturer may make
improvements and /or changes in the product described in this document at any time.
All the registered trademarks referred to this manual are belonging to their respective
companies.
Contact Information
AV LINK GROUP LTD.
Headquarters: 28F., No. 97, SEC. 1, XINTAI 5TH RD., XIZHI DIST.,
NEW TAIPEI CITY 221, TAIWAN (R.O.C.)
TEL: 886-2-2697-2288
Fax: 886-2-2697-2299
E-mail: sales@cctch.com.tw
HDMI SWITCH IC-714AUHR
- 3 -
Table of Contents
Chapter 1 Overview ................................................................................................................. 4
1.1 Introduction ................................................................................................................. 4
1.2 Packing ....................................................................................................................... 5
1.3 Operating Systems .................................................................................................... 5
1.4 Requirements ............................................................................................................. 5
Chapter 2 Features .................................................................................................................. 6
Chapter 3 Specifications ......................................................................................................... 7
Chapter 4 Components ........................................................................................................... 8
4.1 Front Panel ................................................................................................................. 8
4.2 Rear Panel................................................................................................................ 10
Chapter 5 Connection ........................................................................................................... 11
Chapter 6 Operation .............................................................................................................. 12
6.1 Powering Off and Restarting................................................................................... 12
6.2 Hot Plugging ............................................................................................................. 12
6.3 Channel Switching ................................................................................................... 12
6.3.1 Button Switching ........................................................................................... 13
6.3.2 Mouse Control ............................................................................................... 13
6.3.3 Keyboard Operating ..................................................................................... 14
Chapter 7 Operation Applications ........................................................................................ 19
7.1 Mouse Application.................................................................................................... 19
7.2 Keyboard Application ............................................................................................... 20
Chapter 8 Troubleshooting.................................................................................................... 22
Appendix A Default Settings ................................................................................................. 24
HDMI SWITCH IC-714AUHR
- 4 -
CHAPTER 1 OVERVIEW
1.1 Introduction
The IC-714AUHR HDMI switch is a high performance HDMI switching equipment
combining with high-definition display as well as integrated multi-channel audio.
Allowing users to switch between 4 computers via a single USB keyboard, USB mouse,
and HDMI monitor console. This independent switching feature allows users do not
need to purchase a separate USB hub for sharing stand-alone peripheral.
HDMI supports digital input & output including flat panel displays, data projectors,
digital TVs and set-top boxes. Users can easily switch the digital signal to be viewed
through the front panel button or the connected mouse or keyboard. For the Audio,
IC-714AUHR integrates multi-channel audio and switch features allowing users to
experience high-definition audio as same as Dolby True HD.
Easy setup and simple using let users configure IC-714AUHR without installing
software and routines. Provide the ultimate in space-saving and streamlined KVM
technology solutions.
Figure 1-1 IC-714AUHR
HDMI SWITCH IC-714AUHR
- 5 -
1.2 Packing
HDMI KVM Switch x 1 (IC-714AUHR)
Power Adapter x 1
User Manual x 1
Rack-Mount Bracket x 2
Screws (for Brackets) x 8
1.3 Operating Systems
Supported operating systems are described as below:
Windows XP/10/8/7SP1 (not support Win7)
Linux
Mac
1.4 Requirements
A HDMI compatible Monitor
A USB Mouse
A USB Keyboard
Microphone and Speakers
PC with HDMI connector, USB port and Audio / Microphone Jacks
Cables for HDMI 2.0, USB (Type-B male to Type-A male) and
Audio/Microphone
HDMI SWITCH IC-714AUHR
- 6 -
CHAPTER 2 FEATURES
Support 4x1 HDMI / Audio / Microphone / USB interfaces
Control 4 computers using a single keyboard, a mouse, and a monitor
Superior video quality –resolution up to 4K x 2K@60Hz (8-bit)
HDMI 2.0, HDCP 1.4/2.2 compliant, USB 3.1 Gen1 Built-in Port with Super Speed
5Gbps transfer rate
Computer selection via front panel push buttons, keyboard and mouse
Independent switching of the keyboard & mouse, USB 3.1 Gen1 peripheral and
audio & video & microphone
Fully compliant with the USB 2.0 / 3.1 Gen1 specification
Support High Definition Audio (Dolby TrueHD, Dolby Digital Plus and DTS-HD MA)
Auto power on detection among connected PCs
Complete keyboard emulation without error booting including Mac keyboard
Multiplatform support: Windows XP/10/8/7SP1 (not support Win7), Linux and Mac
Through the protection feature, the USB 3.1 Gen1 Port located on the front panel is
not allowed to be switched during processing.
HDMI SWITCH IC-714AUHR
- 7 -
CHAPTER 3 SPECIFICATIONS
Hardware
HDMI 2.0 Connectors Input x 4, Output x 1
Audio Ports Input x 4, Output x 1
Microphone Ports Input x 1, Output x 4
USB 3.1 Gen1 Ports USB type B Female Port x 4
USB type A Female Port x 1
USB 1.1 Consoles USB Type A Female Port Keyboard x 1, Mouse x 1
LED Indicators Link and Active LED x 16
Switch Keys Mode Selection x 4
RS-232 Connector (for debug)
3.5φ Female Port x 1
Power DC 12V/1.25A
Housing Black Iron
Weight 1086g
Dimensions (LxWxH) 269 mm x 107.6 mm x 42.1 mm
Multimedia
Max. Resolution 4K x 2k@60Hz (8-bit)
Highest TMDS Frequency 600MHz
HDMI SWITCH IC-714AUHR
- 8 -
CHAPTER 4 COMPONENTS
4.1 Front Panel
IC-714AUHR supports up to 4 connected PC and specified with LED located on the
front panel. These LEDs specify the connection and configuration status. The four
buttons numbered as 1~4 channels on the front panel represent the connected PCs.
This allows user to quickly switch signals. User can also switch signals by using the
separate mouse and keyboard on the front panel.
Figure 4-1 IC-714AUHR Front Panel
Switch buttons: The switch buttons allow you to switch among 1~4 channels
connected to system PCs.
Press and Hold four buttons simultaneously to enter burning mode. And reboot to
resume normal mode.
HDMI/USB LED Indicators: There are 4 indicators with marked 1~4 on the front
panel. Indicates the HDMI/USB connection status of the connected 4 PCs.
- Green Bright: HDMI/USB source is online.
- Off: Offline.
- Red Flash: The specified HDMI/USB source is offline and selected.
HDMI SWITCH IC-714AUHR
- 9 -
- Red Bright: HDMI/USB interface is locked. The specified HDMI/USB
source is offline and selected.
-
Red and Green Flash Alternately: Currently selected HDMI/USB source
is online.
- Bright and Flash: Currently selected HDMI/USB source is online and
HDMI/USB interface is locked.
USB Console Ports: Connected to USB keyboard and mouse.
Audio OUT Port: Connected to speaker.
Microphone IN Port: Connected to microphone.
USB Type A Port: USB 3.1 Gen1 interface for external hot plugging devices
including printer, scanner or USB storage.
HDMI SWITCH IC-714AUHR
- 10 -
4.2 Rear Panel
IC-714AUHR supports up to 4 sets connected interfaces on the rear panel including
HDMI input connectors, USB type B ports, Audio and Microphone Jacks. All HDMI
interfaces support up to 4K/2K 50/60Hz.
Figure 4-2 IC-714AUHR Rear Panel
Component Description
HDMI IN
Support up to four sets for HDMI IN, USB, speaker and
microphone ports that are connected to system PCs.
USB Type B
Audio
Microphone
HDMI OUT Console monitor port, connect the cable from your HDMI
monitor to here.
RS-232 (3.5φ) The dedicated port for engineer development.
For the connection of each interface, please refer to Chapter 5 Connection
USB Port Descriptions:
USB Port Type USB Port USB Cable
Connector USB Cable
USB 3.0/3.1 Gen1 Type A
USB 3.0/3.1 Gen1 Type B
Table des matières
Autres manuels AVLink Changer
AVLink
AVLink MaitreView 4KLite Manuel utilisateur
AVLink
AVLink 128.822UK Manuel utilisateur
AVLink
AVLink HRM-2514 Manuel utilisateur
AVLink
AVLink VAX-2044 Manuel utilisateur
AVLink
AVLink 128.820UK Manuel utilisateur
AVLink
AVLink 128.824UK Manuel utilisateur
AVLink
AVLink PS-301 Manuel utilisateur
AVLink
AVLink HX-1542W Manuel utilisateur
AVLink
AVLink MaitreView 4KPlus Manuel utilisateur
AVLink
AVLink 128.835UK Manuel utilisateur
