6
2. Quick Start Guide - Setting Up the Camera
Continued...
2.5 Remove the second plastic cover from the sticky pad.
2.6 Carefully position and firmly place the camera on the window.
2.7 Connect the fused Red wire to 12v ignition feed and the Black earth wire
to a chassis earth.
2.8 If fitting alongside a tracker, take the Trigger Out wire to the trigger input
of your unit. If fitting an external button, take the activation feed to the
Trigger In wire. If neither such devices are being fitted, shield the two
wires and loom out of the way.
2.9 Angle the lens to allow clear view of the road ahead, remove grommet from
the hinge area and tighten the screw to lock camera angle in place.
2.10 Ensure the plastic covers are removed from both lenses.
2.11 Organise the cables using the cable clips provided.
4 5 6
2.12 Remove the plastic cover from the sticky pad on the module.
2.13 Firmly place the module at the bottom of the camera with
the lights facing inside the vehicle.
2.14 Connect the 4 and 3 pin connectors between the harness,
camera and infrared module.
2.15 Organise the cables using the cable clips provided.
