Avery Dennison SNAP 700 Manuel utilisateur
User’s Manual—SNAP™ 700 Printer
User’s Manual
SNAP
TM
700 Printer
SNAP
TM
700RFID Printer
Avery Dennison
Information and Brand Management Division
Retail Information Servi es Group
Manual Edition 4.2
1 May 2013
Manual Part Number 621398
User’s Manual—SNAP™ 700 Printer
© opyright 2012 Avery Dennison
All rights reserved.
WARNING
This device complies with Part 15 of the F Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference that may cause undesired operations.
This lass A digital apparatus meets all requirements of the anadian Interference
ausing Equipment Regulations. et appareil numerique de la classe A respecte
toutes les
exigences du Reglement sur le material
broilleur du anada
User’s Manual—SNAP™ 700 Printer
Table of Contents
1.0 INTRODUCTION 9
2.0 INSTALLATION 10
2.1 Preparing for the installation 10
2.1.1 AC Power Line 10
2.1.2 Location Considerations 10
2.1.3 PC Requirements 11
2.1.4 User Safety 12
2.2 Receiving 12
2.3 Unpacking 13
2.3.1 Removin the printer from the carton 13
2.3.2 Inspection / Inventory Checklist 14
2.4 Printer Description 15
2.5 Setting up the Printer 17
2.5.1 Attachin the Stacker 17
2.5.2 Checkin the Main Fuse Confi uration 18
2.5.3 Installin the Power Cord 19
2.5.4 Installin the PC Interface Cable 19
2.5.5 Installin PCMate Platinum Software 20
2. Printing a Test Label 20
2.6.1 Loadin Supplies 20
2.6.2 Turnin the Printer on 20
2.6.2 Selectin the Test Format 20
2.6.3 Printin the Test Labels 21
3.0 OPERATION 22
3.1 Loading Supplies 22
3.1.1 Installin Ink to the Top Ink Supply Station 22
3.1.2 Installin Ink to the Bottom Ink Supply Station 26
3.1.3 Loadin the Stock 26
3.1.4 Butt Splice 28
3.2 Sending a Print Job to the Printer 28
3.3 Printing Labels 29
3.3.1 The Control Panel 29
3.3.2 Printin 30
User’s Manual—SNAP™ 700 Printer
3.3.2.1 Handlin the Leader 30
3.3.3 Errors 30
3.3.4 End of Day 31
3.3.5 Clearin Print Jobs 31
3.3.6 Usin Pre-Printed Stock 31
3.3.6.1 Selectin the Sensor 33
3.3.6.2 Ali nin the Stock to the Sensor 33
3.3.6.3 Ali nin the Sensor to the Stock 33
3.3.7 Feedin the stock 34
3.4 Option Menu System 34
3.4.1 Runnin Test Patterns 35
3.4.3 Settin / Adjustin Voice Button Volume 37
4.0 MAKING ADJUSTMENTS 39
4.1 Print Head Adjustments 39
4.1.1 Adjustin Print Head Pressure 39
4.1.2 Adjustin Density (Darkness) 40
4.2 Adjusting the Stacker 40
4.2.1 Stacker Position 41
4.2.2 To le Switch 41
4.2.3 Stacker An le 41
4.2.4 Platform 42
4.3 Print and Cut Adjustments 43
4.3.1 Cut Adjust 43
4.3.2 Print Adjust 43
4.4 Printer Features 44
4.4.1 Selectin the Printer Lan ua e 44
4.4.2 Settin the Date and Time 44
4.4.3 Enablin or Disablin the Cutter 44
4.4.4 Selectin the Print Speed 45
4.4.5 Selectin the Fla in Mode 45
4.4.6 Selectin the Sense Mark Type 45
4.4.7 Settin the Default Transfer Type 46
4.4.8 Viewin the Life Counts 46
5.0 MAINTENANCE 47
5.1 Print Head Cleaning and Handling 47
5.1.1 Handlin Techniques 47
5.1.2 Cleanin Procedures 48
5.2 Print Head Replacement 49
5.3 Lubrication 52
User’s Manual—SNAP™ 700 Printer
5.4 Rotary Knife Assembly 52
5.4.1 Removin and Replacin the Knife Assembly 53
5.4.2 Adjust the Knife Home Position 56
5.5 Rubber Roller Replacement 56
6.0 SERVICE ADJUSTMENTS 57
6.1 Stock (Web) Guide Position 57
6.2 Stock (Web) Guide Width Adjustments 57
6.3 Stock Feed 57
6.4 Knife Shear Adjustment 57
7.0 REMOTE CONTROL / DISPLAY MODULE 60
8.0 VIRTUAL CONTROL PANEL 61
8.1 Viewin and Chan in Printer Settin s 62
9.0 UPGRADING THE PRINTER SOFTWARE 63
9.1 Introduction 3
9.2 What is Needed 3
9.3 Getting the UPG file 3
9.3.1 Usin Avery Dennison Online to et the UPG file 63
9.3.2 Orderin the UPG file on CD 63
9.4 Getting Ready to Upgrade the Printer 3
9.5 Performing the Upgrade 4
10.0 ELECTRICAL TROUBLESHOOTING 67
10.1 Power Up / Sign On / Communications 7
10.2 Stock / Ink Advance 9
10.3 Print 70
10.4 Cut / Stack 72
10.5 Printer Errors 73
11.0 MECHANICAL TROUBLESHOOTING 79
11.1 Stock 79
11.2 Ink 80
11.3 Print 80
User’s Manual—SNAP™ 700 Printer
11.4 Knife 80
APPENDICES 83
1. Fuse Configuration 83
2. Ink and Stock Transfer Types 84
3. Printer Specifications 8
4. Instructions for Factory / Field Installation of Top Sensor Assemblies 2000 & 20007
88
Installation Procedure 88
5. Programming the Contrast Sensors 92
Pro rammin the Contrast Sensor 93
Pro rammin the Color Contrast Sensor 94
. Instructions for Factory / Field Installation of High Speed Verifier Assembly 20008F
(Factory) and 20008 (Field) 9
Installation Procedure - Mechanical 96
Installation Procedure - Electrical 98
Installation – Rear Cover 99
7. Warranty Policy 100
Service 101
8. Option Menu System Flowchart 102
ELECTRICAL DRAWINGS 103
Electrical System Schematic 104
Harness Connections 105
MECHANICAL ASSEMBLY DRAWINGS 107
Unwind Assembly 108
Unwind Parts List 109
Unwind Assembly RFID 3” / 4” 110
Unwind Parts List RFID 3” / 4” 111
Decurler Assembly 112
Decurler Parts List 113
Web Guide Assembly 114
User’s Manual—SNAP™ 700 Printer
Web Guide Parts List 115
Sensor Tray Assembly 11
Sensor Tray Parts List 117
Sensor Tray Assembly RFID 118
Sensor Tray RFID Parts List 119
Top Print Head Assembly 120
Top Print Head Parts List 121
Bottom Print Head Assembly 122
Bottom Print Head Parts List 123
Print Head Assembly 124
Print Head Parts List 125
Platen Roller Assembly 12
Platen Roller Parts List 127
Ink Arbor Assembly 128
Ink Arbor Parts List 129
Drive Assembly 130
Drive Parts List 131
Knife Assembly 132
Knife Parts List 133
Nip Roller Assembly 134
Nip Roller Parts List 135
Knife / Drive Motors Assembly 13
Knife / Drive Motors Parts List 137
Knife / Drive Motors Assembly RFID 138
Knife / Drive Motors RFID Parts List 139
Upright Frame Assembly 140
User’s Manual—SNAP™ 700 Printer
Upright Frame Parts List 141
Covers Assembly 142
Covers Parts List 143
Stacker Assembly (Sheet 1 of 2) 144
Stacker Assembly (Sheet 2 of 2) 145
Stacker Parts List 14
Addendum – Printing and Supplies Handling Procedure 147
Addendum II – Short Feed 149
Short Feed O-Rin Replacement 149
Short Feed Assembly Parts List 151
Short Feed Part List 152
Revision Record 154
User’s Manual—SNAP™ 700 Printer
9
1.0 Introdu tion
AVERY DENNISON has designed the SNAP
TM
700 printer for ease of installation,
si ple operation, low cost of ownership, and dependability. The SNAP 700
printer is capable of printing two-sided brand/care labels at a rate of up to 12
inches (305 ) per second. Your SNAP 700 printer allows for quick change-
outs of inks, stock, and label sizes, providing the versatility required to eet
ost brand/care labeling needs. Finally, the SNAP 700 printer supports various
options including RFID.
This anual guides the printer operator as an easy-to-use, quick-reference guide.
It contains procedures for receiving, handling, set-up, installation, operation, and
aintenance of the SNAP 700 printer.
Please read this section of the anual to fa iliarize yourself with the printer and
to guide you through the initial receiving and set-up of your new SNAP 700
printer. Throughout this anual, a syste of
NOTES, CAUTIONS, and
WARNINGS identify key infor ation to ensure your personal safety and to
proper printer operation. Please review these carefully.
We also strongly suggest that you watch the 17-minute training video, which is
available on the D2Comm web site. Refer to the documentation included with
the rinter for more details.
NOTES all attention to information that is espe ially
signifi ant to understanding and operating the equipment.
CAUTION noti es inform you of a tions or situations in
whi h the printer might be damaged.
WARNING noti es des ribe situations in whi h la k of
attention or insuffi ient equipment knowledge ould ause
either personal injury or damage to the printer.
10
User’s Manual—SNAP™ 700 Printer
2.0 Installation
2.1 Preparing for the installation
2.1.1 AC Power Line
NOTE: AVERY DENNISON requires that the minimum
ele tri al servi e be 10 Amps @ 115VAC or 6 Amps @
230VAC. This will allow you to plug the SNAP 700 printer,
PC, and any additional support or servi e equipment into
the same servi e. We highly re ommend that the printer
and its a essories be on a dedi ated ir uit.
The electrical service supplying power to the SNAP 700 printer or to peripheral
equip ent connected to the SNAP 700 printer should eet standard electrical
code practices, including proper grounding and neutrals.
2.1.2 Lo ation Considerations
The SNAP 700 printer weighs 60 pounds (27.2 Kg) and requires a table of
sufficient quality and strength to handle this load. The printer requires an area
of approxi ately 72" wide x 30" deep x 32" high (1.8 x 76 c x 81 c ). The
host PC (if used) and any printer options will increase the required area. AVERY
DENNISON reco ends using an industrial type worktable. Refer to Figure 1
below.
The SNAP 700 printer is designed for easy operator accessibility to the printer
controls and co ponents. Select your SNAP 700 printer’s location to eet the
following criteria:
1. Physical de ands on the operator will dictate proper height of the table
supporting the printer. Ensure the operator has co fortable access to the
printer. Refer to Figure 1.
2. Allow enough space for s ooth flow of aterials that the operator will
load on the printer as well as space for processing the finished product
fro the printer.
3. While AVERY DENNISON has designed the printer to be reasonably
quiet, select an area where repetitious noise fro printing and cutting
processes is acceptable.
CAUTION: Ea h ustomer must take responsibility to
ensure the workstation reated for the SNAP 500 printer
meets the re ommended requirements to ensure optimal
operation of the printer.
Autres manuels pour SNAP 700
4
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Avery Dennison Imprimante
Avery Dennison
Avery Dennison FreshMarx 9417 Manuel de service
Avery Dennison
Avery Dennison Pathfinder 6059 Document technique
Avery Dennison
Avery Dennison Monarch SIERRA SPORT4 9493 Manuel utilisateur
Avery Dennison
Avery Dennison Monarch 9855 RFID Manuel de service
Avery Dennison
Avery Dennison APP 31x Manuel utilisateur
Avery Dennison
Avery Dennison MONARCH 9416 XL Instructions d'installation et d'utilisation
Avery Dennison
Avery Dennison Monarch 9419 Manuel de service
Avery Dennison
Avery Dennison Monarch TC6039SA Manuel de service
Avery Dennison
Avery Dennison Monarch 9460 Manuel de service
Avery Dennison
Avery Dennison AP4.4_5.4 Manuel utilisateur
Avery Dennison
Avery Dennison Pathfinder6057 Manuel d'utilisation et d'entretien
Avery Dennison
Avery Dennison Monarch ADTP1 Manuel utilisateur
Avery Dennison
Avery Dennison Monarch 9854 Manuel utilisateur
Avery Dennison
Avery Dennison 9442 Manuel utilisateur
Avery Dennison
Avery Dennison ALS 104 Manuel utilisateur
Avery Dennison
Avery Dennison Stacker Monarch 932TM Manuel utilisateur
Avery Dennison
Avery Dennison Pathfinder 6140 Manuel utilisateur
Avery Dennison
Avery Dennison AP 2.4 Manuel utilisateur
Avery Dennison
Avery Dennison TC9820PHI Manuel utilisateur
Avery Dennison
Avery Dennison Monarch Pathfinder Ultra Silver Manuel utilisateur
