Avenview HBT-C6POE-HDV-S Manuel utilisateur
Control Your Video
VIDEO WALL VIDEO PROCESSORS
MULTIVIEWERS DIGITAL SIGNAGE
EXTENDERS CONTROL CENTERS
SCALERS WIRELESS
HDBaseT HDMI/VGA Scaler Over CAT5e/6/7
Transmitter with LAN Support
© 2015 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Model #: HBT-C6POE-HDV-S
Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page
3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
2. INTRODUCTION ........................... ..................................................................................................3
4. PACK AGE CONTENTS
.....................................................................................................................4
5. BEFORE INSTALLATION ................................................................................................................... 4
7.3 REMOTE CONTROL .....................................................................................................................8
8. RS-232 PIN DEFINITIONS ....................................................................................................................9
9. RS-232 COMMANDS..... .......................................................................................................................10
...........................................................................................................................................12
10. OSD MENU
11. INPUT RESOLUTION SUPPORT..........................................................................................................14
3. FEATURES ....................................... ...................................................................................................3
6. APPLICATION DIAGRAM ...................................................................................................................5
7. PANEL DESCRIPTION ...................................................................................................................6
7.1 INPUT PANEL (FRONT PANEL) .................................................................................................6
7.2 INPUT PANEL (REAR PANEL) .................................................................................................7
12. INSTALLATION ....................................................................................................................................15
13. GENERAL TROUBLESHOOTING .......................................................................................................15
14. SPECIFICATIONS .................................................................................................................................16
1.2 SAFETY INSTRUCTIONS ..................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2
1.1 IMPORTANT SAFEGUARDS ..............................................................................................................1
www.avenview.com Page
1
SECTION 1: GETTING STARTED
1.1 IMPORTANT
SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•External causes to the product, such as electric power fluctuation or failure.
•u se of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY I NSTRUCTIONS
The HBT-C6POE-HDV-S has been tested for conformance to safety regulations and requirements, and has been certified
for international use. However, like all electronic equipments, the HBT-C6POE-HDV-S should be used with care. Read the
following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
! Do not dismantle the housing or modify the module.
! Dismantling the housing or modifying the module may result in electrical shock or burn.
! Refer all servicing to qualified service personnel.
! Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
! keep the module away from liquids.
! Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
! Have the module checked by a qualified service engineer before using it again.
! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
www.avenview.com Page
2
1.3 REGULATORY N OTICES FEDERAL COMMUNICA
TIONS COMMISSION FCC)
This equipment has been tested and found to comply with part 15 of the f CC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR
POWER ADAPTER SUPPLIED. DO NOT TAMPER WITH
THE ELECTRICAL PARTS. THIS MAY RESULT IN
ELECTRICAL SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO
WILL VOID THE WARRANTY AND CONTINUED
USE OF THE PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON
A SURFACE, IT SHOULD BE IN A GROUNDED
ENVIROMENT
www.avenview.com Page
3
2. INTRODUCTION
The HBT-C6POE-HDV-S is an HDBaseT™ Transmitter Scaler that supports both HDMI or PC (VGA) input. It is capable of
scaling and switching any video along with audio and extending the uncompressed digital signal over CAT5e/6/7 cable to the
Receiver at a distance of up to 100 meters. This unit can alsosupport 2-way IR, RS-232 and bidirectional LAN support. The
user can simply control many functions via on-panel buttons or IR remote control with support of an On-screen Display
(OSD) providing selection and system information. The HBT-C6POE-HDV-S provides a full range of output resolutions, from
640 up to 1080p and WUXGA (RB). The bi-directional Power over Ethernet (PoE) function provides greater flexibility during
installations.
• Supports both HDMI/VGA inputs scaling to a full range of HDTV or PC resolutions up to 1080p and WUXGA (RB).
• Transmission of uncompressed data over a single CAT5e/6/7 cable up to 100m/328ft.
• 5Play™ convergence: Video and Audio, LAN serving, bidirectional Power over Ethernet (PoE) and Control (IR RS-232 bypass).
• Supports IR, Remote control, RS-232 (bypass) and on-panel controls.
• Provides bidirectional 24V DC power to or receive from compatible PoE Receiver through CAT5e/6/7 cable.
• Supports Ethernet transmission rates up to 100 Mbps.
• Supports NTSC and PAL formats for Composite Video input.
Note:
1. This system was tested with CAT6/23AWG cables, results may vary with cables of different specifications.
2. The PoE function is designed for powering compatible Receiver units only—non-PoE Receivers will need their own power
supply. Receivers from other brands may not be compatible.
3. DO NOT connect the LAN connection to the CAT5e/6/7 port. Doing so may cause a power shutdown and may damage the
device.
3. FEATURES
www.avenview.com Page
4
4. PACKAGE CONTENTS
Before you start the installation of the HDMI HDBaseT Transmitter Scaler, please check the package contents.
1HBT-C6POE-HDV-S X 1
2
IR EXTENDER
IR BLASTER
POWER ADAPTER 24/1.25A
USER’S MANUAL
IR REMOTE
OK
INPUT
EXIT MENU
RESET AUTO
ADJUST
www.avenview.com page 5
6. APPLICATION DIAGRAM
www.avenview.com Page
6
7. PANEL DESCRIPTION
7.1 INPUT PANEL (HBT-C6POE-HDV-S) Front Panel 7
1. SERVICE: Reserved for manufacturer use only. 2. IR RECEIVER WINDOW: Receives only the IR signal
from the supplied remote control for this device only.
3. HDMI: Connect to a digital source device such as Bluray
Set Top Box.
4. VGA: Connect to a Laptop/Desktop source with a
D-Sub 15 Pin cable.
5. AUDIO: Connect to an analog stereo (L/R) audio
source with a 3.5mm mini-jack cable.
6. MENU: This button enters the On-Screen Display
(OSD) menu.
INPUT (–) Button & HDMI/PC LED: Press the
INPUT (−) button to toggle between CV or PC inputs.
When in CV mode the LED will be lit, off when in PC mode.
7. −/+: Use these buttons to navigate down and up
in the on-screen menu.
8.
ENTER: Press this button to confirm the selection. Also:-
Press this button together with [–] key to switch output timing to 720p@60 instantly.
Press this button together with [+] key to switch output timing to XGA (1024x768) instantly.
9.
1234569
8
www.avenview.com Page
7
7.2 INPUT PANEL (HBT-C6POE-HDV-S) Back Panel
1. POWER LED: This LED will illuminate when the
device is connected to an active power supply.
2. DC 24V: Connect the 24 V DC power supply to the
unit and plug the adaptor into an AC outlet. Only one
unit requires powering if both the Transmitter and
Receiver are both PoE compatible.
3. RS-232 IN: Connect to a PC or RS-232 control system
with a D-Sub 9 pin male cable for the transmission of
RS-232 commands.
4.
LAN: Connect to an active network for LAN serving. When
any compatible LAN equipped receivers are connected, this
allows the network access (including internet access if
available) to be shared between any
connected LAN
equipped receivers 100Mbps. Connect any Ethernet
equipped device e.g. a Smart TV or games console to the
LAN port of a receiver for that device
to share the network/
internet access.
23 4 5 6 7
1
5. IR Blaster: Connect the supplied IR Blaster cable for IR
signal transmission. Place the IR Blaster in direct line-of-
sight of the equipment to be controlled.
6. IR Extender: Connect the supplied IR Receiver cables
for IR signal reception. Ensure that remote being used is
within the direct lineof-sight of the IR Extender.
7. CAT5e/6/7 OUT: Connect to the Receiver unit with a single CAT5e/6/7 cable for transmission of all data signals.
MODE LED: This LED will illuminate when the power is connected.
LINK LED: This LED will illuminate when connected to a Receiver unit
that is connected with a TV/monitor that is displaying the signal.
PANEL DESCRIPTION
Table des matières
Autres manuels Avenview Processeur
