AUTOWOEL D330GD Manuel utilisateur
User Manual
Welcome to use FullHD mini dash camera D330GD
[Warning] In order to avoid product loss caused by improper operation,
please read all safety information of operation instructions in this
manual first. And then use this product. For more technical support,
please refer to the "exception handling" section of this manual.
Language: GB - DE - FR - ES - IT
DIRECTORY
English：Deutsche:
Français：
Italiano: More:
Installation video - - - - - - 51
Contact us - - - - - - - - - - - 51
Español：
Appearance - - - - - - - - - 01
Product Instruction - - - - 01
Exception handling - - - - 04
Installation Instruction - - 05
How to use APP - - - - - - 08
Aussehen - - - - - - - - - - - 11
Produktanleitung - - - - - - 11
Ausnahmebehandlung - - 14
Installationsanleitung - - - 15
Verwendung der APP - - - 18
Apparence - - - - - - - - - - 21
Instruction de produit - - 21
Gestion des exceptions - 24
Installation Instruction - - 25
Comment utiliser l'application -28
Aspetto - - - - - - - - - - - - 41
struzioni sul prodotto - - - 41
Gestione delle eccezioni -44
Istruzioni per l'installazione - 45
Come usare l'APP - - - - - 48
Aspecto - - - - - - - - - - - - - 31
Instrucción del producto - 31
Manejo de excepciones - -34
Instrucciones de instalación -35
Cómo utilizar la APLICACIÓN -38
01
Appearance
⑨
⑦ ⑧
① ② ③
⑥
⑨
④ ⑤
10
Product Instruction
1. File playback
Press "menu" to enter system menu, select the “File playback”, press
"ok" to enter the playback interface.
File Playback Instruction
1) Select the video file to play back and press “ok” to play it.
2) Press Menu button to exit play.
2. WIFI: open / close
3. Satellite Status: Received the GPS signal status
4. GPS on/ off: open / close
5. Speed Unit: km/h / mph
6. Speed remind:
OFF/30mph/35mph/40mph/50mph/55mph/60mph/65mph
①menu ②Up ③On/Off ④Down ⑤OK
⑥Lens ⑦Power ⑧Rear Cam ⑨LCD ⑩MIC
GB
02
8. Clock Setting: Up and Down button change the number, the Ok
button to confirm.
9. Language: English, Deutsche, Rançais, Español, Italiano, Nederlands
7. Time Zone Select: Please select your local time zone
10. Stamp: Date / Off .
Note: the stamp display on the video.
23. Reset Setup: YES / NO
Note: restore all the setting to factory default value
24. Format sd card
Press "menu button" to enter system menu, select the "format SD-card"
Note: Format sd card will clear all the micro card data, and it’s unrecov-
erable.
11. Movie Mode: FHD30 / HD30
12. Exposure: -2 ~ +2
13. LCD Power Save: OFF / 1min / 3min
14. Sound Record: open / close
15. Beep: open / close
16. Volume: 0~10
17. Loop recording: 1min/ 2mins /3mins
18. Time lapes: open / close
19. Protect Level: Off / High/ Middle / Low
20. Parking Monitoring: Off / High/ Middle / Low
21. Delete Files: Delete Normal folder or Event folder
22. Flicker: 50Hz / 60Hz
25. FW Version: AVT004
26. APP Download: Please scan the QR code to download the APP
GB
03
● Loop Recording: Off, 1minute, 2minutes, 3minutes
● Resolution: FHD, HD
● Sound Record: On, Off
● G-sensor: Off, High, Middle, Low
● Language: English, Deutsche, français，Español，italiano，Nederlands
● LCD Save: Off, 1minute, 3minutes
● Date and Time: Press up/down to adjust date and time, and press ok
to confirm
● Volume: press up to increase volume, down to decrease volume, and
press ok to confirm
● Sound: Off, On
● Watermark format: date, close
● Time zone: press up/down to adjust the time zone
● Frequency: 50Hz, 60Hz
● System Reset: Confirm, Cancel
● GPS positioning information: Check current GPS location information
● GPS time setting: Confirm or Cancel
● Speed: km/h / mph
● Speed reminder: optional speed, machine will alarm when driving
speed over the set value
● Delete document: press the ok key to enter to delete the correspond-
ing file
● APP download: Enter by confirm key , and use mobile phone to scan
QR code to download
(If the product relevant functions do not conform to the specification, it
is the upgrade reason.The actual version shall prevail)
GB
Exception handling
04
Display
Video Format
Micro Sd card
Resolution
G-sensor
Audio
3.0 inch IPS
MOV
8GB-64GB Class 10 Micro SD card
Front 1920*1080P +Back 720P
3 Axis G-sensor
Support sound recording and playback
Loop recording
Language
Battery
Power
Temperature
Function
Yes . 1min / 2mins / 3mins
and overwritten by new files.
English, Deutsche, français，Español，italiano, Nederlands
Super capacitor
5V
Operation temperature: -20 °C ~ 60 °C
Storage temperature: -30 °C ~ 80 °C
WIFI, Time lapse, GPS positioning, Parking monitor
Loop recording, Dual recording
If some functions do not work properly, or you have changed
the relevant Settings, try to restart the machine or restore
factory Settings.
● Low battery/Not to save settings/automatic shutdown when car start?
1. Remove the memory card
● Memory card is full?
1. Format memory card.
2. Adjust the "G-sensor" in the machine to a low level and format the
memory card regularly for about a month.
3. Replace the memory card.
GB
Installation instruction
05
● Memory card is wrong?
1. Format memory card.
2. Replace to use new card.
● Please insert SD card/ SD card can not be recognized?
The memory card is damaged/slow/incompatible/no card/please
replace the genuine high speed TF card.
● Black screen/flower screen/flash screen?
1. Restart and test to see if it can be restored.
2. Reset the system.
3. Contact the merchant for repair.
● Breakdown?
1. Restart and test to see if it can be restored.
2. Remove the memory card to test whether the memory card caused
the crash.
3. Reset the system and test.
4. Contact the merchant for repair.
● Don’t start up?
1. Check if the power cable is connected properly.
2. Unplugged memory card to boot and test.
3. Connect the machine to the computer to start the test.
4. Reset the system and test.
Attentions:
1. Power on before installation to check whether all functions of the
machine are normal. Wiring cannot be pulled vigorously. Do not connect
wrong or insert wrong or even reverse connection when connecting the
cable head.
GB
06
2. If the function and display are normal before installation, but abnormal
after installation, it is likely to cause problems during installation. Please
check whether there is a short circuit in the link line, or whether the pin
inserted in the link head is crooked and causes short circuit.
It is strictly forbidden to destroy or privately modify the original line in
the process of loading .If wire is damaged, you must replace a whole
set of new wire to install before power on.
◆ Rear camera installation
Step 1: Fix camera with 3M adhesive
Find a best location, tear off the 3M
adhesive on the rear camera, fix the rear
camera near by the car license plate lamp.
(if you need to adjust the angle, please
attach the rear camera bracket to the rear
camera and tighten it with screws first).
Step 2: Remove the Panel
Remove your trunk's interior panel to
expose the cars rear wiring chambers. Pop
open your trunk and look for a solid interior
panel covering the opposite side of your
license plate mounting area. Then,insert a
trim removal tool or other thin device
behind the panel and pry it off.
Step 3: Snake the cable
Use a trim removal tool to pop out tailgate
trim, then run the cable from outside of the
car into the trunk of your car.
Step 4: Connect the rear cameras power
cable to the extension cable.
After snaking your rear camera's extension
cable, connect the power cable to your rear
camera's extension cord.
GB
07
DVR
RearCamera
Cable arrangement
For safety, make sure you do this while the car is turned off. Lastly, please poke
the red positive bare wire through the positive reverse light wire and then wrap
with an electrical tape.
After connecting the red lead, it will have the reverse assist function.
Cable arrangement
Please arrange the cable as below
Step 5: Connecting the red wire with the
reverse light wires.
Reverse light wires are normally located
on the rear side of your car although their
placement may vary so be sure to refer to
your car’s manual. Once spotted, Use a
pair of pliers or wire stripper to peel the
rubber to expose the live wire.
Step 6: Route your rear camera's power
cable to the front of the car.
If you'd like, use a trim removal tool to
pop out the headlining panel directly
above your windshield. Then, run your
cable through the exposed chamber.
Step 7: Power on the dash cam with box
included car charger, don't charge it with
your own chargers.
Step 8: Test the camera to make sure
everything works.
GB
How to use APP
08
IOS Android
①：Please connect the cable ACC B+ and GND before using
②：Please check the connect port carefully
1. You can use the car charger in the package directly.
2. If you want the time lapse function, you need to use a hardwire kit,
Please buy our hardwire kit on Amazon, or contact us to get it.
3. For hardwire kit installation, please follow the instructions or consult a
professional installer.
Hardwired kit installation
Note: This cable low voltage protection 11.8V
1. Please scan the QR code to download APP
GB
Table des matières
Langues :
