Autonics TF31-A Manuel utilisateur

H-2

TF3 SeriesTF3 Series

Refrigeration Temperature Controller

Features

NEW

Manual

Comprehensive Device Management Program (DAQMaster)

●DAQMaster is comprehensive device management program. It is available for parameter setting, monitoring, and user

parameter group setting, parameter mask setting for only TF3 Series.

●Visit our website (www.autonics.com) to download user manual and comprehensive device management program.

< DAQMaster screen >< Computer specication for using software >

Item Minimum requirements

System IBM PC compatible computer with Intel Pentium Ⅲor above

Operating system Microsoft Windows 98/NT/XP/Vista/7/8/10

Memory 256MB or more

Hard disk More than 1GB of free hard disk space

VGA 1024×768 or higher resolution display

Others RS-232 serial port (9-pin), USB port

●Visit our website (www.autonics.com) to download user manual and communication manual.

● User manual describes for specications and function, and communication manual describes for RS485 communication

(Modbus RTU protocol) and parameter address map data.

●●●Standard installation size for refrigeration and air-cooling panels

(W70.3×H28.2mm)

●Various compressor load current capacity: 5A, 16A, 20A

●Various user-friendly functions:

- Defrost sync function:

simultaneous defrost operation of multiple controllers (up to 6 units)

- RTC (Real Time Clock) function:

night mode operation and real-time defrost control

- Built-in alarm function

●Remote monitoring of real-time temperature and output control

(using TFD series remote display unit, sold separately)

●Communication output models available: RS485 (Modbus RTU)

● Parameter conguration via PC (RS485 communication)

- DAQMaster software included (comprehensive device management software)

●IP65 protection structure (IEC standard): front panel only

Please read “Safety Considerations” in operation

manual before using.

H-3

Refrigeration Temperature Controller

(A)

Photoelectric

Sensors

(B)

Fiber

Optic

Sensors

(C)

Door/Area

Sensors

(D)

Proximity

Sensors

(E)

Pressure

Sensors

(F)

Rotary

Encoders

(G)

Connectors/

Connector Cables/

Sensor Distribution

Boxes/ Sockets

(H)

Temperature

Controllers

(I)

SSRs / Power

Controllers

(J)

Counters

(K)

Timers

(L)

Panel

Meters

(M)

Tacho /

Speed / Pulse

Meters

(N)

Display

Units

(O)

Sensor

Controllers

(P)

Switching

Mode Power

Supplies

(Q)

Stepper Motors

& Drivers

& Controllers

(R)

Graphic/

Logic

Panels

(S)

Field

Network

Devices

(T)

Software

Ordering Information

※1: Only for 1CH input, compressor output model (TF31-1 G).

※2: Only for 3CH input model (TF33- - ). Option function is varied by compressor load capacity and contact.

Option function

Compressor

load capacity & contact

Synchronize defrost

function

RS485

communication RTC function

RS485

communication+

RTC function

No option

Compressor 5A 1a contact (TF33- A-S) (TF33- A-T)

(TF33-3 A-A)

Compressor 16A 1c contact

- -

(TF33-3 H-R)

(TF33- H)

※3: Except compressor+defrost or auxiliary (alarm/evaporator-fan) output model (TF33-2

- )

※Only for 3CH input, compressor+defrost+auxiliary (alarm/evaporator-fan) output model (TF33-3

- )

supports buzzer.

TF 3 3 3 4 H T

No-mark No option

S Synchronize defrost

TRS485 communication

R※3RTC (real time clock)

A※3RS485 communication+RTC (real time clock)

G※1Compressor 20A 1a contact

Compressor 5A 1a contact

Compressor 16A 1c contact

1 24VAC 50/60Hz, 12-24VDC

4 100-240VAC 50/60Hz

1CH 1 Compressor output

1CH,

3CH

Compressor+Defrost or Auxiliary

(alarm/evaporator-fan) output

3Compressor+Defrost+Auxiliary

(alarm/evaporator-fan) output

1CH input (NTC or RTD) [temperature+digital input (DI)]

3CH input (NTC)

[inlet temperature+defrost temperature+

outlet temperature or digital input (DI)]

3 999 (3-digit)

TF Refrigeration Temperature Controller

Compressor load capacity

Option function※2

Power supply

Number of input channels

Digits

Item

Output

Remote Display Unit (TFD Series, Sold Separately)

Remote display unit (TFD) displays current temperature or output

status of TF3 at remote place.

TFD cable is TFD-3: 3m, TFD-5: 5m.

Connect the phone-jack of remote display unit (TFD) to the data

loader port of TF3.

This unit is dedicated for TF3 Series and it does not directly

communicate with upper devices (PC, PLC, etc.)

If TFD communication with TF3 error occurs, TFD ashes display

component for 1 sec. Check the connection with TF3.

※When connecting TFD to the data loader port of TF3, you cannot connect Autonics SCM-US (USB to Serial converter,

sold separately). for communication. Use SCM-US48I(USB to RS485 converter, sold separately), SCM-38I(RS232C to

RS485 converter, sold separately).

H-4

TF3 Series

Remote display unit [TFD]

※1: The weight includes packaging. The weight in parentheses is for unit only.

The weight is varied by model option.

※Environment resistance is rated at no freezing or condensation.

Model TFD-3 TFD-5

Power supply 3.3VDCᜡ

Power consumption Max. 1W

Display method 7 Segment LED method (red)

Communication method Serial (TTL Level), Half duplex

Communication cycle 100ms

Cable Ø2.5mm, 3m Ø2.5mm, 5m

Vibration 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours

Enviorn-

ment

Ambient temp. -10 to 50℃, storage: -20 to 60℃

Ambient humi. 35 to 85%RH, storage: 35 to 85%RH

Protection structure IP67

Approval

Weight※1Approx. 77g (approx. 48g)

Specifications

Model TF31- TF33- -

Number of channels 1CH 3CH

Power sup-

ply

AC power 100-240VACᜠ50/60Hz

AC/DC power 24VACᜠ50/60Hz, 12-24VDCᜡ

Allowable voltage range 90 to 110% of rated voltage

Power

consumption

AC power Max. 8VA (100-240VACᜠ50/60Hz)

AC/DC power Max. 5VA (24VACᜠ50/60Hz), Max. 3W (12-24VDCᜡ)

Display method 7 Segment LED method (red)

Character size (W×H) 9.4×19.3mm

Input type NTC 5kΩ/10kΩ

RTD DPt100Ω

Sampling period 500ms

Display accuracy At room temp. (23℃±5℃): ±1℃±1 digit Out of room temp. range: ±2℃±1 digit

Control

output

Compressor (COMP) 250VACᜠ5A 1a, 16A 1c, 20A 1a

Defrost (DEF) 250VACᜠ10A 1a

Auxiliary (AUX) 250VACᜠ5A 1a

Communication output

RS485 communication output (Modbus RTU)

Digital input Contact input: ON max. 1㏀, OFF min. 100㏀

No contact input: ON residual voltage: max. 1V, OFF leakage current: max. 1mA, outow current: 4㎂

Control method ON/OFF control

Hysteresis 0.5 to 5.0℃, 2 to 10℉variable

Relay life

cycle

Compressor

(COMP)

5A 1a Mechanical: 5,000,000 operations, Electrical: 50,000 operations (250VAC 5A)

16A 1c Mechanical: 20,000,000 operations, Electrical: 30,000 operations (250VAC 16A)

20A 1a Mechanical: 10,000,000 operations, Electrical: 100,000 operations (250VAC 20A)

Defrost (DEF) Mechanical: 20,000,000 operations, Electrical: 100,000 operations (250VAC 10A)

Auxiliary (AUX) Mechanical: 5,000,000 operations, Electrical: 50,000 operations (250VAC 5A)

Memory retention Approx. 10 years (non-volatile memory method)

Insulation resistance Min. 100MΩ (at 500VDC megger)

Dielectric

strength

AC power 3000VAC 50/60Hz for 1 min (between all terminals and case, power and input circuit)

AC/DC power 1000VAC 50/60Hz for 1 min (between all terminals and case, power and input circuit)

Noise resistance Square-wave noise by the noise simulator (pulse width: 1㎲) ±2kV R-phase and S-phase

Vibration 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours

Environ

ment

Ambient temperature -10 to 50℃, storage: -20 to 60℃

Ambient humidity 35 to 85%RH, storage: 35 to 85%RH

Accessories Bracket: 2, NTC sensor (5kΩ): 1

Protection structure IP65 (front case)

Approval

Weight※1Approx. 207g (approx. 105g)

H-5

Refrigeration Temperature Controller

(A)

Photoelectric

Sensors

(B)

Fiber

Optic

Sensors

(C)

Door/Area

Sensors

(D)

Proximity

Sensors

(E)

Pressure

Sensors

(F)

Rotary

Encoders

(G)

Connectors/

Connector Cables/

Sensor Distribution

Boxes/ Sockets

(H)

Temperature

Controllers

(I)

SSRs / Power

Controllers

(J)

Counters

(K)

Timers

(L)

Panel

Meters

(M)

Tacho /

Speed / Pulse

Meters

(N)

Display

Units

(O)

Sensor

Controllers

(P)

Switching

Mode Power

Supplies

(Q)

Stepper Motors

& Drivers

& Controllers

(R)

Graphic/

Logic

Panels

(S)

Field

Network

Devices

(T)

Software

※1: Only for compressor+defrost or auxiliary (alarm/evaporator-fan) output model (TF3 -2 - ),

compressor+defrost+auxiliary (alarm/evaporator-fan) output model (TF3 -3 - ).

※2: Only for compressor+defrost+auxiliary (alarm/evaporator-fan) output model (TF3 -3 - ).

※3: Only for synchronize defrost function model (TF33- A-S), or RS485 communication model (TF33- A-T/A).

TF33- A-

NTC 5K/10K

DIGITAL INPUT

S1 S2 S3 COM

A+ B-

SENSOR

COMP OUT

250VAC 5A

RESISTIVE

LOAD

DEF OUT

250VAC 10A

RESISTIVE

LOAD※1

AUX OUT

250VAC 5A

RESISTIVE

LOAD※2

SOURCE

SYNCHRONIZE

/RS485※3100-240VAC 50/60Hz,

24VAC 50/60Hz,

12-24VDC

TF31-1 G TF31- A

COMP OUT

250VAC 20A

RESISTIVE LOAD

SOURCE

NTC 5K/10K

DPt100

DIGITAL INPUT

SENSOR

100-240VAC 50/60Hz,

24VAC 50/60Hz,

12-24VDC SENSOR

NTC 5K/10K

DPt100

DIGITAL INPUT

SOURCE

COMP OUT

250VAC 5A

RESISTIVE

LOAD

DEF OUT

250VAC 10A

RESISTIVE

LOAD※1

AUX OUT

250VAC 5A

RESISTIVE

LOAD※2

100-240VAC 50/60Hz,

24VAC 50/60Hz,

12-24VDC

TF31- H

TF33- H-

NTC 5K/10K

DIGITAL INPUT

S1 S2 S3 COM

SENSOR

COMP OUT

250VAC 16A

RESISTIVE

LOAD

DEF OUT

250VAC 10A

RESISTIVE

LOAD※1

AUX OUT

250VAC 5A

RESISTIVE

LOAD※2

SOURCE

100-240VAC 50/60Hz,

24VAC 50/60Hz,

12-24VDC

NTC 5K/10K

DPt100

DIGITAL INPUT

SENSOR

COMP OUT

250VAC 16A

RESISTIVE

LOAD

DEF OUT

250VAC 10A

RESISTIVE

LOAD※1

AUX OUT

250VAC 5A

RESISTIVE

LOAD※2

SOURCE

100-240VAC 50/60Hz,

24VAC 50/60Hz,

12-24VDC

Connections

Terminal number a b c

General 1 to 4 4 to 6mm Max. 1.7mm Max. 3.7mm

TF3 - H 5 to 10 6 to 8mm Max. 2.3mm Max. 4.5mm

TF3 - A 5 to 6 6mm Max. 1.9mm Max. 4.0mm

7 to 10 6 to 8mm Max. 2.3mm Max. 4.5mm

TF3 - G 6 to 7 6 to 8mm Max. 2.3mm Max. 4.5mm

General 11 to 12 6mm Max. 1.9mm Max. 4.0mm

※Use crimp terminals of size specied below.

H-6

TF3 Series

77 5.5 74.3

TF3 Series

37.5

40.5

23.9

3.3

Bracket

TFD (sold separately)

Panel cut-out

Size

Series

A B C D

TF3 Min. 100 ※1Min. 55 70.3+0.7

028.2+0.5

TFD Min. 65 Min. 40 45.7+0.6

025.4+0.3

※1. When connecting remote display unit (TFD), or SCM-US, Min. 120

NTC sensor (5kΩ) AWG22

TPE lead wire

Soldering

Max. 5

6±0.2

Max. 15

2000±50

5±1

Dimensions

(unit: mm)

52 12

Ø2.5,

3m or 5m

31.5

Sold Separately

SCM-US

(USB to Serial converter)

Communication converter

SCM-38I

(RS232C to RS485 converter)

SCM-US48I

(USB to RS485 converter)

SCM-WF48

(Wi-Fi to RS485·USB wireless

communication converter)

H-7

Refrigeration Temperature Controller

(A)

Photoelectric

Sensors

(B)

Fiber

Optic

Sensors

(C)

Door/Area

Sensors

(D)

Proximity

Sensors

(E)

Pressure

Sensors

(F)

Rotary

Encoders

(G)

Connectors/

Connector Cables/

Sensor Distribution

Boxes/ Sockets

(H)

Temperature

Controllers

(I)

SSRs / Power

Controllers

(J)

Counters

(K)

Timers

(L)

Panel

Meters

(M)

Tacho /

Speed / Pulse

Meters

(N)

Display

Units

(O)

Sensor

Controllers

(P)

Switching

Mode Power

Supplies

(Q)

Stepper Motors

& Drivers

& Controllers

(R)

Graphic/

Logic

Panels

(S)

Field

Network

Devices

(T)

Software

3. Compressor (COMP) output indicator (green):

Turns ON for compressor output. In case of compressor

protection operation and output does not turn ON,

it ashes. When operating compressor continuously, it turns ON

for 2 sec, and turns OFF for 1 sec.

1 8 92

711 10

1. Present value (PV) display component (red):

RUN mode: Displays present value (PV).

Setting mode: Displays parameter and setting value.

2. Deviation indicator (■: green, ▼/▲: red):

Displays deviation of present value (PV) based on setting

value (SV).

PV deviation temperature Deviation display

More than 1.8℃▲ indicator turns ON

Within ±1.8℃■ indicator turns ON

Less than -1.8℃▼ indicator turns ON

4. Defrost (DEF) output indicator (green):

Turns ON for defrost output. Flashes for defrost delay operation.

Turns ON for 2 sec and OFF for 1 sec for manual defrost or Power ON defrost.

5. Evaporator-fan (FAN) output indicator (green):

Turns ON for evaporator-fan output. Flashes for delay operation of evaporator-fan output.

6. Auxiliary (AUX) output indicator (green): Turns ON for alarm output. Flashes for delay operation of alarm output.

7. Unit indicator (red): Displays temperature unit set at temperature unit [UNT] of parameter 1 group.

8. (MODE) key: Used for entering parameter setting group, returning RUN mode, moving parameter or saving SV.

9. (AUX) key:

Used for entering SV setting group or changing setting value.

Hold the key over 3 sec to select active/inactive auxiliary output in RUN mode.

10. (DEF) key:

Used for entering SV setting group or changing setting value.

Hold the key over 3 sec to execute/stop manual defrost in RUN mode.

11. (COMP) key:

Used for entering SV setting group, changing setting value, moving digits.

Hold the key over 3 sec to active/inactive compressor output in RUN mode.

When buzzer alarm occurs, press the key once to stop the sound. (Only for 3CH input, compressor+defrost+auxiliary

(alarm/evaporator-fan) output model (TF33-3 - ) supports buzzer.

Buzzer [BUZ] of parameter 1 group is set as [ON])

12. Data loader port:

It is for displaying TF3 data at remote display unit (TFD) by connecting phone-jack.

In other case, for connecting Autonics SCM-US (USB/Serial converter, sold separately),

it is a PC loader port of serial communication for parameter setting or monitoring by PC.

Product Mounting

Unit Description

Insert the unit into a panel, fasten the bracket by

pushing with tools with a (-) driver.

(-) driver

H-8

TF3 Series

PS PSPS

When PW is validWhen PW is validWhen PW is valid

Saved automatically

after 3 sec

Press any key among

, , once 2 sec

RUN mode

User parameter 1 to 29

Monitoring time [MoT]User parameter 0

※1※1※1

Max. value [hPK]

Min. value [lPK]

1.5 sec 1.5 sec

Input type [ㅑINT]

Input sensor 2 ON/OFF [S2]

Input sensor 3 selection [S3]

Virtual temperature rate [VtR]

Temperature unit [UNT]

Input correction 1 [Ib1]

Input correction 2 [Ib2]

Input correction 3 [Ib3]

Delay display period [DsT]

Defrost/auxiliary output [sDA]

Auxiliary output [AUX]

Buzzer [BUZ]

Parameter 1 group

[PA1]

Display selection

[DpT]

SV setting

[SV]

Parameter user group

[PAU]※2

Parameter Group

1.5 sec

3 sec 3 sec

※1. [PS] parameter appears only when password is set.

The default password is [000]. If password is not valid, the

password code appears. Press any key among the , ,

keys to return to password entering window. Press the

(MODE) key to return to RUN mode.

If you forget password, contact Autonics after checking

password code.

※2. It appears when setting user parameter group in the

comprehensive device management program (DAQMaster).

※Press the (MODE) key after changing the setting to save the SV.

※

Hold the (MODE) key for 1.5 sec while in setting mode to move to

the parameter group.

※

Hold the (MODE) key for 3 sec while in setting mode to return

RUN mode.

※

Press the (MODE)key at the last parameter of each parameter

group, it moves to that parameter group name. You can move to

other groups with , keys.

※

If there is no additional key operation within 30 sec after entering

into setting mode, it will be automatically returned to RUN mode and

previous setting value will be remained.

※

The shaded parameters are displayed when user level [USR] of

parameter 5 group is set as standard level [STD].

H-9

Refrigeration Temperature Controller

(A)

Photoelectric

Sensors

(B)

Fiber

Optic

Sensors

(C)

Door/Area

Sensors

(D)

Proximity

Sensors

(E)

Pressure

Sensors

(F)

Rotary

Encoders

(G)

Connectors/

Connector Cables/

Sensor Distribution

Boxes/ Sockets

(H)

Temperature

Controllers

(I)

SSRs / Power

Controllers

(J)

Counters

(K)

Timers

(L)

Panel

Meters

(M)

Tacho /

Speed / Pulse

Meters

(N)

Display

Units

(O)

Sensor

Controllers

(P)

Switching

Mode Power

Supplies

(Q)

Stepper Motors

& Drivers

& Controllers

(R)

Graphic/

Logic

Panels

(S)

Field

Network

Devices

(T)

Software

3sec

Parameter 2 group

[PA2]

Comp. output mode [OFT]

Parameter 3 group

[PA3]

Defrost method & operation [DEF]

Defrost cycle [DIN]

Real-time defrost cycle [rDI]

Real-time defrost cycle 1: hour [DH1]

Real-time defrost cycle 1: min [DM1]

...

Real-time defrost cycle 8: hour [DH8]

Real-time defrost cycle 8: min [DM8]

Defrost time [ㅑDET]

Pump down delay time [PdD]

Defrost end delay time [DrT]

Defrost end temperature [EDT]

Defrost hysteresis [dHY]

Defrost when power ON [pDE]

Defrost delay when power ON/

manual defrost [dDE]

Defrost group [dGR]

Parameter copy [pDC]

Prior defrost selection [dPR]

Defrost time unit [uDE]

Alarm delay after defrost/

door open [AdD]

Temperature display during

defrosting [tDE]

Parameter 4 group

[PA4]

Alarm option [AlT]

Alarm high-limit deviation [AlH]

Alarm low-limit deviation [AlL]

Alarm hysteresis [aHY]

Alarm ON delay time [aON]

Alarm OFF delay time [aOF]

External alarm delay time [eAD]

Alarm output method [aN]

Evaporator-fan operation [fTY]

Evaporator-fan control

temperature [fT]

Evaporator-fan hysteresis [fHY]

Evaporator-fan mode [FAN]

Evaporator-fan start-up

delay time [pDR]

Alarm operation mode [AL]

Parameter 5 group

[PA5]

Current minute [CUM]

Digital input [DI]

Loop break alarm

monitoring time [LBA]

Comm. address [ADR]

Comm. speed [BPS]

Comm. parity bit [PRT]

Comm. stop bit [STP]

Comm. response wait time [RwT]

Comm. write [COW]

User level [USR]

SV setting group lock [lSV]

Front key lock [lDK]

PA 0 group lock [lP0]

PA user group lock [lPU]

PA 1 group lock [lP1]

PA 2 group lock [lP2]

PA 3 group lock [lP3]

PA 4 group lock [lP4]

PA 5 group lock [lP5]

Password [PWD]

Current hour [CUH]

1.5sec 1.5sec 1.5sec 1.5sec

3 sec 3 sec 3 sec 3 sec

Hysteresis [HYS]

Offset [OFS]

SV high-limit [HSV]

SV low-limit [LSV]

Night mode [nMD]

Night mode SV correction [nSV]

Night mode hysteresis [nHY]

Night mode offset [nOF]

Night mode start hour [nSH]

Night mode start min [nSM]

Night mode end hour [nEH]

Night mode end min [nEM]

Temperature monitoring [eMO]

Comp. start-up delay time [SDL]

Comp. min. operation cycle [CYC]

Comp. restart delay time [RDL]

Comp. min. operation time [ONT]

Comp. continuous operation [CC]

Alarm delay time after

continuous operation [AdC]

Comp. operation cycle when

sensor break [CLE]

Comp. duty rate when

sensor break [DUT]

H-10

TF3 Series

Parameter 1 Group ※1. S: Press any key among , , keys.

※

After entering setting mode, hold the (MODE) key anytime for 3 sec to return to RUN mode.

※

After entering setting mode, hold the (MODE) key anytime for 1.5 sec to go to the concerned

group name.

※

If you press the (MODE) key after changing the set value of the parameter the set value will

be stored.

※Shaded parameters are for standard-level users, the others are for high-level users.

(You can set the user level [USR] in parameter 5 group).)

※

This parameter might not be displayed depending on other parameter settings or model

specications.

Setting range: Refer to input type and

range.

※When changing input type, SV,hPK,

lPK, Ib1,Ib2,Ib3,HYS,OFS,HSV,

LSV, nSV,nHY,EDT,dHY,AlH,AlL,

aHY,fT,fHY parameter values are

reset.

※When changing temperature unit, hPK,

lPK, Ib1,Ib2,Ib3,HYS,OFS,HSV,

LSV, nSV,nHY,EDT,dHY,AlH,AlL,

aHY,fT,fHY parameter values are reset.

※Appears only for 3CH input model.

Setting range: 0 to 100%

※Appears only when input sensor 3

selection [INT] is set as [TS].

Setting range: -40 to 40℃/℉

Setting range: 0.5 to 10.0 sec

Setting range: -40 to 40℃/℉

※Appears only for 3CH input model.

※Appears only for compressor+defrost or auxiliary

(alarm/evaporator-fan) output model.

※Appears only for compressor+defrost or

auxiliary (alarm/evaporator-fan)

output model, compressor+defrost+auxiliary

(alarm/evaporator-fan).

※Only for 3CH input, compressor+defrost+auxiliary

(alarm/evaporator-fan) output model supports buzzer.

※1

PW code appears

at SV display part

for wrong PW

When PW is correct

+ 1 time

When

is wrong

3 sec

2 sec

'PS

'PS 000

PA1

NsH NsL DpLINT

BUZ

UNT

sDA

VtR

Ib1

Ib2

Ib3

DsT

AUX

Password input

Parameter 1 group

Input type

Input sensor 2 ON/OFF

Buzzer

Input sensor 3 selection

Temperature unit

Defrost/

auxiliary output

Virtual temperature rate

Input correction 1

Input correction 2

Input correction 3

Delay display period

Auxiliary output

OFF

FAN ALM

SDI TS

S?C ?F

SDEF AUX

OFF

RUN mode

H-11

Refrigeration Temperature Controller

(A)

Photoelectric

Sensors

(B)

Fiber

Optic

Sensors

(C)

Door/Area

Sensors

(D)

Proximity

Sensors

(E)

Pressure

Sensors

(F)

Rotary

Encoders

(G)

Connectors/

Connector Cables/

Sensor Distribution

Boxes/ Sockets

(H)

Temperature

Controllers

(I)

SSRs / Power

Controllers

(J)

Counters

(K)

Timers

(L)

Panel

Meters

(M)

Tacho /

Speed / Pulse

Meters

(N)

Display

Units

(O)

Sensor

Controllers

(P)

Switching

Mode Power

Supplies

(Q)

Stepper Motors

& Drivers

& Controllers

(R)

Graphic/

Logic

Panels

(S)

Field

Network

Devices

(T)

Software

Parameter 2 Group ※1. S: Press any key among , , keys.

※

After entering setting mode, hold the (MODE) key anytime for 3 sec to return to RUN mode.

※

After entering setting mode, hold the (MODE) key anytime for 1.5 sec to go to the concerned

group name.

※

If you press the (MODE) key after changing the set value of the parameter the set value will

be stored.

※Shaded parameters are for standard-level users, the others are for high-level users.

(You can set the user level [USR] in parameter 5 group).)

※

This parameter might not be displayed depending on other parameter settings or model

specications.

※

When changing compressor output mode,

CLE,DUT parameter values are reset.

Setting range: 1 to 5℃(0.5 to 5.0℃), 2 to 10℉(2.0 to 10.0℉)

Setting range: 0 to 5℃(0.0 to 5.0℃), 0 to 10℉(0.0 to 10.0℉)

Setting range: -20 to 20℃(-20 to 20.0℃)/

-50 to 50℉(-50 to 50.0℉)

Setting range: 1 to 5℃(0.5 to 5.0℃),

2 to 10℉(2.0 to 10.0℉)

Setting range: 0 to 5℃(0.0 to 5.0℃),

0 to 10℉(0.0 to 10.0℉)

Setting range: 0 to 23 hour

Setting range: 0 to 59 min

Setting range: (LSV+1digit) to high-limit value of input type

※When changing SV high-limit value and SV ＞HSV, SV is reset as HSV.

Setting range: low-limit value of input type to (HSV-1digit)

※When changing SV low-limit value and SV ＜LSV, SV is reset as LSV.

※Appears for RTC function

model.

※Does not appear when night

mode [nMD] is set as

[OFF, DI].

※Appears for RTC function

model or when digital

input [DI] is set as [nMD]in

parameter 5 group.

※Does not appear when night

mode [nMD] is set as

[OFF].

※1

PW code appears

at SV display part

for wrong PW

When PW is correct

+ 2 times

When

is wrong

3 sec

2 sec

'PS

'PS 000

PA2

C HOFT

HYS

OFS

LSV

nSH

HSV

nMD

nSV

nHY

nOF

nSM

Password input

Parameter 2 group

Comp. output

mode

Hysteresis

Offset

SV low-limit

Night mode

start hour

SV high-limit

Night mode

SV correction

Night mode

hysteresis

Night mode

offset

Night mode

start min.

S-40

RUN mode

TIN DIOFF

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Autonics Instrument de mesure

Autonics

Autonics KN-1000B Series Manuel utilisateur

Autonics

Autonics M4N Series Manuel utilisateur

Autonics

Autonics MT4N Series Manuel utilisateur

Autonics

Autonics KN-2000W Series Manuel utilisateur

Autonics

Autonics MP5M Series Manuel utilisateur

Autonics

Autonics krn100 series Manuel utilisateur

Autonics

Autonics MT4W Series Manuel utilisateur

Autonics

Autonics FXY Series Manuel utilisateur

Autonics

Autonics M4Y Series Manuel utilisateur

Autonics

Autonics KT-502H Manuel utilisateur

Autonics

Autonics krn100 series Manuel utilisateur

Autonics

Autonics M4W Series Manuel utilisateur

Autonics

Autonics MP5M4N Manuel utilisateur

Autonics

Autonics MP Series Manuel d'utilisation et d'entretien

Autonics

Autonics KRN1000 Series Manuel utilisateur

Autonics

Autonics M5W Series Manuel utilisateur

Autonics

Autonics M4M Series Manuel utilisateur

Autonics

Autonics KRN50 SERIES Manuel utilisateur

Autonics

Autonics PSQ Series Manuel utilisateur

Autonics

Autonics BL Series Manuel utilisateur

Autonics

Autonics PSAN Series Manuel utilisateur

Autonics

Autonics MP5S Series Manuel utilisateur

Autonics

Autonics MP-XGT Instructions d'installation

Autonics

Autonics AFL Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur