Automotive Data Solutions TR4650A Manuel utilisateur
TR4650A
2023-01-17 © Automotive Data Solutions Inc. 1/17
OWNER’S MANUAL
TERMS OF USE
INSTALLER TERMS OF USE
Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians
who are employed by a registered business specialized in the installation of automotive aftermarket electronics
products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s
responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in
Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential
damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of
economic opportunity and the like that may or may not have resulted from the use, misuse, improper
installation or operation of its products. Purchasers sole contractual remedy is refund of the purchase price of
the ADS product(s). ADS reserves itself the right to suspend any Weblink® account without notice and decline
to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.
END USER TERMS OF USE
ADS products are designed to remote start vehicles from a distance. In order to ensure your iDatastart system
meets all safety regulations and operates as intended by the manufacturer, please follow the usage
recommendations below:
• DO NOT use this product for any purpose other than its intended usage.
• DO NOT remote start a vehicle in an indoor or enclosed area (i.e. garage). Exhaust fumes are extremely
dangerous and can cause personal injury or death. Install carbon monoxide detectors in every living area that
can be exposed to vehicle exhaust fumes.
• DO NOT remote start a vehicle while it is being serviced. Follow the Valet Mode procedure as outlined in your
Owner’s Manual.
• DO NOT remote start a vehicle in gear.
• DO NOT remote start a vehicle with the key in the ignition.
• DO NOT remote start a vehicle left unattended with open windows, unlocked doors or open convertible top.
• DO NOT allow children handle or operate long range remotes.
• ALWAYS engage your emergency brake prior to exiting your vehicle. This may limit motion if the vehicle is
accidentally started in gear.
• AVOID remote starting your vehicle while passengers or pets are on board. This may increase the risk of
TR4650A
2023-01-17 © Automotive Data Solutions Inc. 2/17
shifter being put in gear after vehicle has been remote started.
• AVOID parking your vehicle on an inclined surface or an area surrounded by obstacles. For manual vehicles,
ALWAYS ensure the Reservation Mode sequence, as outlined in your Owner’s Manual, is correctly engaged prior
to the next remote start.
• AVOID delaying the inspection of your iDatastart system in the event of malfunction. Immediately contact a
Certified Technician to ensure that installation or defective equipment is properly addressed.
REMOTE OVERVIEW
Your iDatastart remote start system may include one or both long-range remotes listed below.
Please take a moment to familiarize yourself with their general features.
REMOTE MODEL TR4450A
Technology LoRa 2-WAY + Bluetooth / Low Energy
Communication / Max. Range 2-Way / 1 Mile
Buttons 5
Transmit confirmation (TX) Top LED
Receive confirmation (RX) Top LED + Chime
Battery type Built-in rechargeable battery with charging via USB or wireless
charging
Avg. battery life (per charge) 21 days
Warranty 1 year
TR4650A
2023-01-17 © Automotive Data Solutions Inc. 3/17
REMOTE COMMANDS & CONFIRMATIONS
Thanks to their multiplexing technology, iDatastart remotes can pack over 30 functions using only 5 buttons. In
order to get the most out of your remotes, please take a moment to get acquainted with the following functions
below:
NOTES:
1. All functions must be enabled by an Authorized Dealer during installation to be functional on remote
2. Non-highlighted icons = Press & release button
3. Highlighted (grey) icons = Press & hold button for 2.5 seconds
4. Coma (,) between icons = Press buttons one after the other
5. Plus (+) between icons = Press buttons together
6. Timeout between each button press = 3 seconds
7. Function* = Available in 2nd Car Mode
COMMAND Lock & Arm
BUTTON
DESCRIPTION Secures your vehicle by locking the doors and arming
the alarm.
CONFIRMATION 1 chime + 1 flash
COMMAND Unlock & Disarm
BUTTON
DESCRIPTION Accesses your vehicle by unlocking the doors and
disarming the alarm.
CONFIRMATION 2 chimes + 2 flashes
COMMAND Query*
BUTTON
DESCRIPTION Queries vehicle and vehicle battery voltage and interior temperature.
TR4650A
2023-01-17 © Automotive Data Solutions Inc. 4/17
COMMAND Panic*
BUTTON
DESCRIPTION Triggers the panic siren.
CONFIRMATION 1 chime + 1 flash
COMMAND AUX 5*
BUTTON
DESCRIPTION To be completed by Authorized Dealer if applicable
COMMAND Trunk Release*
BUTTON
DESCRIPTION Releases the trunk or hatch.
COMMAND Engine Start/Stop*
BUTTON
DESCRIPTION Starts and stops the engine.
CONFIRMATION 4 chimes + 4 flashes (Button LEDs will also flash
intermittently while engine is running)
COMMAND AUX 1
BUTTON
DESCRIPTION To be completed by Authorized Dealer if applicable
TR4650A
2023-01-17 © Automotive Data Solutions Inc. 5/17
COMMAND AUX 2
BUTTON
DESCRIPTION To be completed by Authorized Dealer if applicable
COMMAND AUX 3
BUTTON
DESCRIPTION To be completed by Authorized Dealer if applicable
COMMAND AUX 4
BUTTON
DESCRIPTION To be completed by Authorized Dealer if applicable
COMMAND 2nd Car Mode
BUTTON *
DESCRIPTION
Controls two iDatastart-equipped vehicles using one
remote. Works with all functions marked with an
asterisk (*).
COMMAND Silent Lock*
BUTTON
DESCRIPTION Disables the vehicle’s horn and alarm siren.
TR4650A
2023-01-17 © Automotive Data Solutions Inc. 6/17
COMMAND Silent Unlock*
BUTTON
DESCRIPTION Disables the vehicle’s horn and alarm siren.
COMMAND Valet Mode ON/OFF
BUTTON
DESCRIPTION
Turns off remote start and security features when
servicing your vehicle or valet parking. Keyless entry
features remains functional.
CONFIRMATION •1 chime ON
•2 chimes OFF
COMMAND Runtime Extend
BUTTON
DESCRIPTION Seamlessly extends your engine runtime without
restarting your vehicle.
COMMAND Mute ON/OFF
BUTTON
DESCRIPTION
Disables the vehicle’s horn and alarm siren even
when alarm is triggered. Remote will still receive
alarm notification.
CONFIRMATION •1 chime ON
•2 chimes OFF
TR4650A
2023-01-17 © Automotive Data Solutions Inc. 7/17
COMMAND Ignition Lock ON/OFF
BUTTON
DESCRIPTION Automatically locks doors when engine is running.
CONFIRMATION •1 chime ON
•2 chimes OFF
COMMAND Passive Lock & Arm ON/OFF
BUTTON
DESCRIPTION Automatically locks and arms your vehicle 60 seconds
after you unlock it.
CONFIRMATION •1 chime ON
•2 chimes OFF
COMMAND Turbo ON/OFF
BUTTON
DESCRIPTION Cools down your turbo before turning the engine off.
Programmable runtime from 30 seconds to 4 minutes.
CONFIRMATION •1 chime ON
•2 chimes OFF
COMMAND Weather Start ON/OFF
BUTTON
DESCRIPTION
Sets your vehicle to automatically remote start every
2, 3 or 4 hours (programmable) or from a temperature
sensor sold separately.
CONFIRMATION •1 chime ON
•2 chimes OFF
TR4650A
2023-01-17 © Automotive Data Solutions Inc. 8/17
COMMAND Lock Remote
BUTTON
DESCRIPTION Disables all functions on your remote.
CONFIRMATION 1 chime + 1 flash
COMMAND Unlock Remote ON/OFF
BUTTON
DESCRIPTION Enables all functions on your remote.
CONFIRMATION 2 chimes + 2 flashes
COMMAND Mute Remote ON/OFF
BUTTON
DESCRIPTION Disables the chime when pressing any button on your
remote.
CONFIRMATION •1 chime ON
•2 chimes OFF
COMMAND Battery Level Check
BUTTON ,
DESCRIPTION Shows the remote battery level.
LED STATUS
66% – 100%
33% – 66%
0% – 33%
TR4650A
2023-01-17 © Automotive Data Solutions Inc. 9/17
COMMAND Factory Reset
BUTTON
DESCRIPTION The factory reset must be done to enable Bluetooth
paring with the iDatalink Phone app.
COMMAND Power OFF Remote
BUTTON
DESCRIPTION Turns OFF the remote.
COMMAND Power ON Remote
BUTTON
DESCRIPTION By default, the remote is OFF inside the packaging.
Press and hold the “F” button to turn ON the remote.
COMMAND Bluetooth OFF
BUTTON
DESCRIPTION Bluetooth is disabled.
CONFIRMATION The remote will chirp twice (2x) and the LED will flash
twice (2x).
COMMAND Bluetooth ON
BUTTON
DESCRIPTION Bluetooth is enabled.
CONFIRMATION The remote will chirp once (1x) and the LED will flash once (1x).
TR4650A
2023-01-17 © Automotive Data Solutions Inc. 10/17
PROGRAMMING A NEW REMOTE
Are you replacing a lost or damaged remote or simply adding an extra remote to your iDatastart system?
Please take note of the following:
1. A functional iDatastart system must already be installed in your vehicle.
2. All new remotes must be installed by an iDatastart Authorized Dealer.
3. A maximum of 4 remotes can be programmed to your iDatastart system.
CHARGING THE REMOTE'S BUILT-IN BATTERY
Your iDatastart remote has a built-in rechargeable battery that can be charged using USB or wireless charging.
To charge your remote using USB:
1. Insert the USB cable into the remote’s USB port.
2. Connect the USB cable to the USB power adapter.
3. Plug the USB power adapter to a power outlet.
4. The LEDs will turn on to indicate that the remote is charging.
To charge your remote using wireless charging:
1. Connect the wireless charging pad to a power outlet.
2. Place the wireless charging pad on a leveled surface.
3. Center the remote on the wireless charging pad with the LEDs facing up.
4. The LEDs will turn on to indicate that the remote is charging.
CHARGING STATUS Battery Level
Bottom LED flashing green. 0% – 33%
Center LED flashing green. 33% – 66%
Top LED flashing green. 66% – 100%
All LEDs are solid green. The remote is fully charged.
Table des matières
