Automatic Technology TEMPO ATS-2 Manuel utilisateur

Tempo (ATS-2) Smart Hub Installation Instructions

Smart Phone Control Kit

NETWORK SMART HUB KIT - ORDER NO. 86953

ITEM DESCRIPTION QTY

1 WIRELESS HUB100 WT B&D 1

2 POWER SUPPLY AU 240V 1

3 WALL BRACKET HUB100 1

4 PLASTIC WALL PLUG 6.9 X 25 2

5 SELF TAPPING SCREW 6 X 25 2

6NETWORK TRANSCEIVER MODULE 1

7 HARNESS 4 CORE 275 ASSY 1

Garage Door Openers

Important Safety Instructions

WARNING! • DO NOT attempt to disassemble, repair or modify the product. This will invalidate

the warranty.

• DO NOT install product on openers that control J-Type or Single Piece Doors.

• Do not allow children to play with the Smart Hub or your smart phone if the ATA

phone app has been installed.

ELECTROCUTION! • Keep the device away from water and other liquids. In the event that water or

other liquids enter the device, power off he product immediately and clean the

device.

• To reduce the risk of fire or electric shock, do not expose this device to rain or

moisture. The device should not be exposed to dripping or splashing.

• DO NOT remove the cover as there are no user-serviceable parts inside.

CAUTION:

Fall from ladder • Ensure ladder is the correct type for job.

• Ensure ladder is on flat ground.

• Ensure user has 3 points of contact while on ladder.

Burns • DO NOT handle damaged or leaking batteries

• The battery backup kit contains sealed lead-acid batteries that must be disposed

of properly at the end of their useful life.

Doc # 160400_01

Part # 86954

Released 19/11/19

This device allows for operation of the door when not in line-of-sight of the door and

opener.

The door may operate unexpectedly, therefore do not allow anything to stay in or near the path of the

door. When the door is not operating automatically, watch the door when it is moving and keep people

away until the door is completely opened or closed. Contact with the moving door can cause serious

personal injury or damage to property.

It is our strong recommendation that your opener be fitted with SAFETY BEAMS.Safety

Beams detect any obstructions in the doors path and override automatic operation if one

presents. These must be installed as in accordance with AS/NZS 60335-2-95:2012.

This is in addition to regular professional servicing, and monthly obstruction tests as detailed in your

opener’s Home Owners Manual.

This device must be connected to power at all

times. DO NOT disconnect power after setup.

Smart Hub Set Up

Mounting the Hub

a. Determine whether you are going to wall mount the

hub.

i. If hub is to be placed on bench, simply connect to

power supply 2, turn on and proceed to installing

the Transceiver.

ii. If hub is to be wall mounted follow steps below.

b. To wall mount - Use wall bracket 3as template to

mark where to drill holes. Pre-drill holes.

i. For plaster walls - insert (2) two Plastic wall plugs 4

into holes, place wall bracket over holes and affix

with (2) two self tapping screws 5.

ii. For brick walls - place wall bracket 3over holes and

affix with (2) two self tapping screws 5.

c. Slide the hub over the bracket.

d. Connect the power supply 2and turn on.

This device must be connected to power at all times.

DO NOT disconnect power after setup.

Mounting the Transceiver to the Opener

a. Disconnect the power supply to the opener and open

the main cover.

b. Connect the harness 7to ACC on the control board,

before attaching to the network transceiver module 6

as shown.

c. Close cover.

d. Download the ATA App and follow the instructions in

the App to setup new smart hub.

e. Use a programmed remote and run the door through a

few cycles which will update the unit with the details of

the transceiver module.

Warranty

Refer to our websites for full warranty details;

www.automatictechnology.com.au

WARRANTY

ACCESSORIES 1 year

If you are a consumer under the Australian Consumer Law, our goods come with guarantees that cannot be excluded under the Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You

are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

This warranty certificate and other statements contained in this document or other ATA documents given to you do not exclude, restrict or modify the

application of all or any of the provisions of the Australian Consumer Law.

Subject to your non-excludable rights under the Australian Consumer Law, ATA expressly excludes any liability for consequential loss, incidental or indirect

damages (including but not limited to damages for loss of business profits, business interruption and loss of business information) due to a defect of the

Product. In particular, any loss or damage caused to other equipment or accessories used with the product or any loss resulting from a delay in repair is

excluded to the extent permitted by law.

ATS-2

Autres manuels pour TEMPO ATS-2

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Automatic Technology Système d'ouverture de porte

Automatic Technology

Automatic Technology DOMINATOR ShedMaster GDO-8V3 Manuel utilisateur

Automatic Technology

Automatic Technology Syncro ATS-3 Guide de l'utilisateur

Automatic Technology

Automatic Technology HiRO GDO-12 Manuel utilisateur

Automatic Technology

Automatic Technology GDO-6 EasyRoller Guide de l'utilisateur

Automatic Technology

Automatic Technology TEMPO ATS-2V3 Manuel utilisateur

Automatic Technology

Automatic Technology DOMINATOR EasyRoller Manuel utilisateur

Automatic Technology

Automatic Technology Axess Pro 1505 Manuel utilisateur

Automatic Technology

Automatic Technology Axess Pro Series 3000 Manuel utilisateur

Automatic Technology

Automatic Technology GDO-12 HiRO GDO-12V1AM Manuel utilisateur

Automatic Technology

Automatic Technology GDO-6 EasyRoller Manuel utilisateur

Automatic Technology

Automatic Technology Dominator Tempo ATS-2AM Manuel utilisateur

Automatic Technology

Automatic Technology GDO-11 Ero Manuel utilisateur

Automatic Technology

Automatic Technology DOMINATOR EasyRoller 14 Manuel utilisateur

Automatic Technology

Automatic Technology GDO-12Hir Guide de l'utilisateur

Automatic Technology

Automatic Technology GDO-8 ShedMaster Manuel utilisateur

Manuels Système d'ouverture de porte populaires d'autres marques

Pamex

Pamex KT-INP35 Manuel utilisateur

Label

Label NEPTIS/LE Manuel utilisateur

Cal-Royal

Cal-Royal N-F77CVR Manuel utilisateur

Scrigno

Scrigno OPEN1000 Manuel utilisateur

TriMark

TriMark UM 34 Manuel utilisateur

BFT

BFT WIND RMB 130B 200 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Besam

Besam Swingmaster MP Mode d’emploi

CRL

CRL SENIOR PRIMA Manuel utilisateur

Assa Abloy

Assa Abloy SARGENT 1431 Series Manuel utilisateur

GAL

GAL MOVFR Fiche technique

Olide

Olide 120B Manuel utilisateur

Normstahl

Normstahl IDO7 Manuel utilisateur

Häfele

Häfele Finetta T 70 VF Manuel utilisateur

AGS

AGS D-PL Manuel

Stanley

Stanley MA900ñ Instructions d'installation

WITTUR

WITTUR Hydra Plus UD300 Manuel

Alutech

Alutech TR-3019-230E-ICU Instructions d'installation et d'utilisation