
AUTOFRY Models MTI-5 Rev. 2 Operator's Manual
AUTOFRY MTI-5 Rev. 2 Set-up and Installation
The AUTOFRY comes from the factory complete with everything you will need to
start cooking with the exception of food and oil. By following these simple
instructions you can have your AUTOFRY installed and ready to earn profits for
you in as little as 30 minutes.
Prepare electrical service.
A licensed electrician in accordance with the National Electrical Code (NEC) and
all local codes must install electrical service. Do not alter the factory supplied
power cord or plug. Never attach the AUTOFRY to an extension cord. Consult the
Identification Tag for equipment wattage and voltage.
Motion Technology, Inc. will not assume responsibility for
any injuries or equipment malfunctions resulting from
non-conforming electrical installations.
Prepare counter top.
Choose a counter top location that is sturdy, level, easily cleanable and fire
resistant. Stainless steel, fire resistant plastic laminate or solid surface materials
are acceptable. Never use a porous material to prepare food as bacterial
contamination could result.
MTI Form OP-0005 Rev. 002 7/98
E167654 3