Aurora ZS Pro-F Manuel utilisateur

Aurora UPC ZS Zone Sensors Installation Guide

Aurora Universal Protocol Converter (UPC)

ZS Zone Sensors

Installation Guide

IG1582EW 04/14

Aurora UPC ZS Zone Sensors Installation Guide

Table of Contents

What are ZS Sensors? ........................................................................................................... 1!

Rnet Configuration...............................................................................................................................................2!

Specifications ....................................................................................................................................................... 3!

To address a ZS Sensor ......................................................................................................... 5!

Wiring and mounting a ZS Sensor ......................................................................................... 6!

Power requirements ............................................................................................................................................6!

Rnet wiring specifications ..................................................................................................................................7!

To wire and mount a ZS Sensor.........................................................................................................................8!

To communicate through the local access port ................................................................... 10!

To set up a Local Access connection in the WebCTRL® for OEMs interface........................................... 10!

Troubleshooting ..................................................................................................................12!

ZS Pro or ZS Pro-F ............................................................................................................................................. 12!

To format a ZS Sensor...................................................................................................................................... 13!

Aurora UPC ZS Zone Sensors Installation Guide

ZS Sensors are thermistor-based temperature sensors that may optionally sense humidity, CO2, or VOC. ZS

Sensors are wired to the Rnet of the Aurora UPC Controller.

The following table shows the 4 ZS Sensor models and their features.

Sensor

Features

ZS Standard

•Local access port

•No user control

ZS Plus

•Slide potentiometer to make the zone warmer or cooler

•button to override the schedule and put the zone in an

occupied state, or force the zone to an unoccupied state

•Green LED to indicate occupied state

•Local access port

What are ZS Sensors?

Aurora UPC ZS Zone Sensors Installation Guide

Sensor

Features

ZS Pro

•LCD display

•button to override the schedule and put the zone in an

occupied state, or force the zone to an unoccupied state

•and buttons to change any editable property, such as

the setpoint temperature

•button to cycle through information defined in the control

program

•Green LED to indicate occupied state

•Local access port

ZS Pro-F

All of the ZS Pro's features plus:

•button to turn on heating, cooling, or fan only, or set to

auto control.

•button to adjust fan speed (not used)

•F/C button to set temperatures to Fahrenheit or Celsius

To configure the control program for the desired user interaction with the sensor, see the ZS Sensor Application

Guide.

For basic user instructions, see the ZS Sensor User Guide.

Rnet Configuration

An Rnet can consist of the following devices wired in a daisy-chain or star configuration:

•Up to 15 ZS Sensors

•Up to 2 BACview®devices

NOTES

•Although an Rnet can have 15 ZS Sensors, you can have no more than 5 sensors per control program.

•You cannot have RS sensors and ZS sensors on the same Rnet.

Aurora UPC ZS Zone Sensors Installation Guide

Specifications

Sensing element

range and accuracy

Temperature only

Range:

Accuracy:

32 to 122°F (0 to 50°C)

±0.35°F (0.2°C)

Temperature if humidity

is included

Range:

Accuracy:

50 to 104°F (10 to 40°C)

0.5°F (0.3°C)

Options:

Humidity

Range:

Accuracy:

10 to 90%

2% typical

CO2

Range:

Accuracy:

0 to 2000 PPM

±75 PPM typical

VOC

Range:

Accuracy:

0 to 2000 ppm

1 PPM

Power requirements

Temperature only

ZS Standard or ZS Plus:

ZS Pro or Pro-F:

12 Vdc @ 6 mA

12 Vdc @ 7 mA

Temperature with humidity

ZS Standard or ZS Plus:

ZS Pro or Pro-F:

12 Vdc @ 7 mA

12 Vdc @ 8 mA

Temperature with humidity

and VOC - All models

12 Vdc @ 60 mA

Temperature with humidity

and CO2- All models

12 Vdc @ 15 mA (idle) to

190 mA (CO2measurement cycle)

Temperature and CO2-

All models

12 Vdc @ 14 mA (idle) to

189 mA (CO2measurement cycle)

Power supply

The 4-conductor Rnet cable from a controller supplies +12 Vdc @ 210

mA. For additional power, use an external power supply. Use the above

power requirements to calculate the size of the external power supply.

Communication

115 kbps

Local access

port

For local access to start up and troubleshoot the system

Environmental

operating range

-4 to 122°F (-20 to 50°C), 10 to 90% relative humidity, non-condensing

Mounting

Standard 4x2-in. electrical box using the 6-32 x 1/2" mounting screws

provided

Aurora UPC ZS Zone Sensors Installation Guide

Overall dimensions

Temperature sensor

or temperature with

humidity sensor

Sensor with CO2or VOC

Width:

Height:

Depth:

Width:

Height:

Depth:

3 in. (7.62 cm)

4-13/16 in. (12.22 cm)

13/16 in. (2.01 cm)

2-7/8 in. (7.3 cm)

4-13/16 in. (12.22 cm)

1-1/4 in. (3.18 cm)

Listed by

FCC Part 15-Subpart B-Class A, CE

Aurora UPC ZS Zone Sensors Installation Guide

Each ZS Sensor on an Rnet must have a unique address, but addresses do not have to be sequential.

Use the DIP switches on the back of the ZS Sensor to set an address from 0 to 14. (0 is factory default.) Each DIP

switch has the value shown in the figure below. Turn on as many DIP switches as you need so that their total value

equals the address.

DIP

Switch

value

1 2 3 4

EXAMPLE DIP switches 1 and 4 above are on. Their values (1 + 8) total 9, so the sensor's address is 9.

To address a ZS Sensor

Aurora UPC ZS Zone Sensors Installation Guide

The Rnet communicates at a rate of 115 kbps and should be wired in a daisy-chain, star, or hybrid configuration.

Power requirements

Temperature only

ZS Standard or ZS Plus:

ZS Pro or Pro-F:

12 Vdc @ 6 mA

12 Vdc @ 7 mA

Temperature with humidity

ZS Standard or ZS Plus:

ZS Pro or Pro-F:

12 Vdc @ 7 mA

12 Vdc @ 8 mA

Temperature with humidity

and VOC - All models

12 Vdc @ 60 mA

Temperature with humidity

and CO2- All models

12 Vdc @ 15 mA (idle) to

190 mA (CO2 measurement cycle)

Power supply

The 4-conductor Rnet cable from a controller supplies +12 Vdc @ 210

mA. For additional power, use an external power supply. Use the above

power requirements to calculate the size of the external power supply.

The controller and the external power supply must share a common

ground.

Wiring and mounting a ZS Sensor

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Aurora Régulateurs de température

Aurora

Aurora ZS Standard Manuel utilisateur

Manuels Régulateurs de température populaires d'autres marques

Swegon

Swegon LUNAd MB Manuel utilisateur

Lucky Reptile

Lucky Reptile Thermo Control II Manuel utilisateur

SENSORMETRIX

SENSORMETRIX Argon 100 Manuel utilisateur

Fuji Electric

Fuji Electric PXE4 Manuel utilisateur

Yuyao gongyi

Yuyao gongyi XMT-808 series Manuel utilisateur

Selec

Selec TC544C Manuel utilisateur

P.W. KEY

P.W. KEY rt-208gt Manuel utilisateur

Future Design

Future Design FDC-9200 Manuel utilisateur

BH Thermal

BH Thermal BriskONE Manuel utilisateur

Omron

Omron E5EX-H Manuel utilisateur

West Control Solutions

West Control Solutions KS 45 Guide de démarrage rapide

MCS

MCS RITC-15B Manuel utilisateur

SMC Networks

SMC Networks Thermo-con INR-244-639 Manuel utilisateur

eltherm

eltherm Ex-TC It Series Manuel utilisateur

Omron

Omron C200H-TV Series Manuel utilisateur

industrie technik

industrie technik CA1 Manuel utilisateur

KRAL

KRAL EET 32 Manuel utilisateur

dixell

dixell XR420C Schéma de câblage