Audiovox VDS102T Manuel utilisateur
VDS102T
DELUXE
OVER-HEAD
DOCKING STATION
FOR DT102
128-7346
Operation
Manual
®
ON OFF AUTO
Warnings
Do not use any solvents or cleaning materials when cleaning the video monitor.
Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly
dampened lint free cloth to wipe the screen if it is dirty.
Lock the LCD screen in the fully closed position when not in use.
Before putting on headphones always adjust the volume setting to the lowest position.
Remember to leave the dome light switch in the off or auto positions when the vehicle is
unattended, as the dome lights, if left on, can drain the vehicle’s battery. Do not put
pressure on the screen.
Caution children to avoid touching or scratching the screen, as it may become dirty or
damaged.
Television Reception
This entertainment system is designed primarily for viewing prerecorded movies or
playing video games. Television reception in a moving vehicle will be limited and in
some areas will not be possible due to weak and variable signal strength. Television
viewing in a stationary vehicle will result in an improvement, but may still be marginal
due to signal strength. The quality of the picture will not be consistent with home TV
reception. Reception may be affected by weather and distance from TV station. A weak
signal may cause the picture to roll, be snowy, or cause some color loss.
2
Important Notice
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to
the driver if the LCD panel or video monitor is used for vehicle information, system
control, rear or side observation or navigation. If the LCD panel or video monitor is used
for television reception, video or DVD play, the LCD panel or video monitor must be
installed so that these features will only function when the vehicle is in “park” or when
the vehicle’s parking brake is applied.
An LCD panel or video monitor used for television reception, video or DVD play that
operates when the vehicle is in gear or when the parking brake is not applied must be
installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to
the operator of the motor vehicle.
3
Congratulations on your purchase of the Audiovox VDS102T Over-head Docking Station.
The VDS102T is designed as a deluxe docking station for shuttle model DT102. This docking
station has a built-in TV tuner and a wireless FM Modulator. The VDS102T has been designed
to give you and your family many years of video entertainment in the mobile environment.
Please read the directions that follow to familiarize yourself with the product and to ensure that
you obtain the best results from your equipment.
Please note: Installation options vary, see the individual owner’s manuals for each
component in your system to obtain a full understanding of each component’s operation.
Safety Precaution
For safety reasons, when changing video media it is recommended that the vehicle is not in
motion, and that you do not allow children to unfasten seat-belts to change video media or
make any adjustments to the system. System adjustments can be accomplished using the
remote control, while seat-belts remain fastened. Enjoy your Audiovox entertainment system
but remember the safety of all passengers remains the number one priority.
– Infrared Sensor
– Dome Lights with Built-in Three Position Switch
– TV Tuner (Part Number PODTVT)
– Backlit controls for Low Light operation
– Five Frequency Wireless FM Modulator
– Full Function Remote Control
– Mounting Bracket
– Trim Ring
Main Features
4
Controls and Indicators Diagram
5
1 2
3
5
9
11
10
6
7
4
8
13
14
12
6
1. Infrared Sensor – Allows the remote control to operate the VDS102T and to control the DT102
when docked.
2. Three position Dome Light Switch
• Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior
illumination.
• Off – The dome lights will not turn on in this position.
• On – Turns on the dome lights.
3. Dome Lights – Provide additional interior illumination.
4. Channel (5) Button – Used this button to increase the channel number to the desired number.
5. Channel (6) Button – Used this button to decrease the channel number to the desired number.
6. Auto Program Button – Allows the user to scan and store active TV stations into memory.
7. Screen Release – Moves in the direction of the arrow to release the drop down screen.
8. Shuttle Shut-off Switch – Turns off the DT102 when closed.
9. Security Lock Knob – Used to ensure that the shuttle is not released accidentally.
10. 24 Pin Signal Interface Connector – Used to connect the shuttle to the docking station.
11. Shuttle Release – Press to release the shuttle from the docking station.
12. POWER Button – Used to turn the system ON/OFF. Bright red when system is on, dim when off.
13. FMM Select Button – When this button is pressed it will turn on the wireless FM Modulator and
then cycle through the available FM frequencies (FM Off, Channel 1, 88.3MHz; Channel 2, 88.7MHz;
Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz).
14. Source Select Button – Used to select one of the three sources (DVD, AV1, TV)
Controls Function Descriptions
Remote Control Operation
Remote Control Function Descriptions
7
BATTERY COVER
Battery Installation
Before attempting to operate your Remote
Control, install the batteries as described
below.
1) Turn the Remote Control face down. Using a
fingernail, lift the battery cover off.
2) I n s t a l l t w o “ A A A ” b a t t e r i e s . M a k e
sure that proper polarity (+ or -) is observed.
3) Align the cover tabs with the remote control
and press down until the cover clicks.
The remote control will operate the VDS102T
and the DT102. It is not a universal remote
control and will not control equipment from
other manufacturers.
SETUP
REPEAT
SUBTITL E
SOURCE
AUTO
MEMORY
SKIP/
SEARCH
ERASE/
WRITE
RETURN
MENU
1
4
7
ENTER
+
PIXMUTE
SEARCH SEARCH
9
2
5
8
6
3
POWERPOWER
FMM
ON/OFFON/OFF
ANGLE
EJECT
CHANNEL
SELECT
SEEK / CH
A-B
SEEK / CH
RADIO TV/C ATVTV DVD
DIS PLAY BAND RECALL STORE
ZOOMAUDIO
PLAY
STOP
II PAUSE
--
1
2
3
4
5
7
6
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
22
24
25
26
27
28
29
30
31
32
34
33
35
36
37
38
0
39
40
41
42
VOLUME
8
*Function control is available on the VDS102T and the remote control.
** Used only when DT102 is installed.
1. POWER Button*
Press this button to turn the VDS102T on. Press the button again to turn the VDS102T off.
2. SOURCE Button*
Use to select one of the three sources (DVD, AV1, TV).
3. AUTO MEMORY Button
(AUTO PROGRAM Button)**
When the AUTO MEMORY button is pressed, all channels are searched and channels that are
detected with signals of sufficient levels are automatically stored in memory.
4. SKIP / SEARCH Button**
This button selects between SKIP and SEARCH mode. In “SKIP mode” the TV tuner will only
stop on channels that are programmed into memory. In search mode the TV will stop on all active
channels.
5. ERASE / WRITE Button**
While tuned to a channel, pressing this button will store or erase the channel from memory.
The stored channel numbers are displayed in “GREEN” and the erased channel numbers are
displayed in “RED”.
6. SEEK / CHANNEL UP (5) Button**
Use this button to increase the channel number to the desired channel and to scroll upward in
menu options.
7. MUTE Button
Press this button to mute the audio.
Pressing the button again restores the sound to the previously set level.
8. ENTER Button**
Used to implement a selected setting or menu option.
9. LEFT (3) Button**
Allows the user to shift left in the menu options.
SEARCH(6) Button**
When this button is pressed, channels are searched in descending order and the tuner will stop on
the next active channel
10. MENU Button**
Allows the user to access the DVD root menu.
11. RETURN Button
Not used in this model.
12. TV Mode Select Button**
Switches certain function keys on the remote control to TV functions.
13. DVD Mode Select button**
Switches certain function keys on the remote control to DVD functions.
14. DISPLAY Button**
Press to display the current DVD disc information.
15. BAND Button
Not used in this model.
9
16. AUDIO Button**
Press this button to display and select the desired AUDIO language. Each time the button is
pressed, the language or track changes.
NOTE: The languages & tracks you can select vary from disc to disc.
17. ZOOM Button **
Press this button to enlarge the picture.
18. PAUSE(;)Button**
Allows the user to pause the playback. Pressing the pause button again will put the DVD player in
step (;4) mode allowing frame by frame playback. Press PLAY to return to normal playback
19. STOP(<)Button**
Disc playback will be stopped.
20. PREVIOUS(9)Button**
Allows the user to return to the previous chapter or track.
21. NEXT(:)Button**
Allows the user to skip to the next chapter or track.
22. REV(7)Button**
Allows the user to search in a backward direction at 2, 4, 8, and 20 times the normal speed.
23. FWD (8) Button**
Allows the user to search in a forward direction at 2, 4,8, and 20 times the normal speed.
24. PLAY (4)Button**
Press this button to activate the play mode when a disc is loaded into the disc compartment.
25. ANGLE Button**
Press this button to display and select the available camera angles. Each time the button is
pressed the angle will change.
NOTE: The number of angles vary from disc to disc.
26. SUBTITLE Button**
Press this button to display and select the available subtitle languages in DVD mode. Each time the
button is pressed, the subtitle language changes.
NOTE: The type & number of languages for subtitles vary from disc to disc.
27. RECALL Button
Not used in this model.
28. STORE Button
Not used in this model.
29. RADIO Button
Not used in this model.
30. TV/CATV Button**
Use this button to select regular (AIR) 69-channel broadcast TV or 125-channel cable TV (standard
Cable, HRC cable, or IRC cable).
As the button is pressed, the on-screen display will cycle as follows:
31. A-B Button**
Allows the user to repeat playback of a DVD or CD from point A to point B.
AIR CABLE-S CABLE-H CABLE-I
10
32. REPEAT Button**
Allows the user to repeat a chapter, title, track, or all of a DVD, CD or MP3.
33. SEEK / CHANNEL DOWN (6) Button
Use this button to decrease the channel number to the desired channel and to scroll downward
in the menu options.
34. SETUP Button**
Allows the user to access the DVD setup menu and select various playback options (Display,
OSD Language, Defaults, Parental Control, Password, Exit Setup).
35. RIGHT (4) Button**
Allows the user to shift to the right in the menu options.
SEARCH(5) Button**
When this button is pressed, channels are searched in ascending order and the tuner will stop on
the next active channel.
36. PIX Button (PICTURE SELECT)**
Each time this button is pressed, the OSD will display the “adjustment bars” for BRIGHTNESS,
CONTRAST, COLOR or TINT. Once the desired adjustment bar is displayed, use the VOLUME
UP/DOWN buttons to adjust the setting. The display will automatically turn off if no adjustments
are made within 6 seconds, or if any other button is pressed.
37. VOLUME (–) Button
Press this button to decrease the volume level of the wired headphones.
38. VOLUME (+) Button
Press this button to increase the volume level of the wired headphones.
39. NUMERIC KEYPAD
Allows the user to directly access specific TV channels, enter a parental control password and
select a specific track or chapter..
40. FMM ON/OFF
Turns FM Modulator power on / off.
41. CHANNEL SELECT Button**
Selects the FM modulator Frequency (Frequency 1, 88.3MHz, Frequency 2, 88.7MHz, Frequency
3, 89.1MHz, Frequency 4, 89.5MHz, Frequency 5, 89.9MHz).
5
42. EJECT ( ) Button**
Used to eject the disc.
Autres manuels pour VDS102T
2
Ce manuel convient aux modèles suivants
1
Autres manuels Audiovox Station d'accueil
Audiovox
Audiovox AR5100 Manuel utilisateur
Audiovox
Audiovox CE710CR - CE Clock Radio Manuel utilisateur
Audiovox
Audiovox DTT7810FM Manuel utilisateur
Audiovox
Audiovox IBOX 200 Guide de démarrage rapide
Audiovox
Audiovox DT102 Manuel utilisateur
Audiovox
Audiovox G2 Cradles Guide de dépannage
Audiovox
Audiovox VDS102T Manuel utilisateur
Audiovox
Audiovox XPress RCi Manuel utilisateur
Audiovox
Audiovox DKP102 Fiche technique
Audiovox
Audiovox DS102 - Car Overhead Docking Station Manuel utilisateur
