Audio DCSTS-K070 Manuel d'utilisation
Window Intercom System
Speaker Pod System –DCSTS-K070
Installation &
User Guide
December 2020
2
Contents
Product Overview
Components
Connections
Installation Instructions
Speaker & Microphone Kit Installation
StaSideInstallation
Customer/Visitor Installation
Hearing Loop Installation
AmplierSetup
Troubleshooting
Engineer’s Mode
3
3
4
5
6
6
7
9
10
12
13
Contactahasapolicyofcontinuousproductdevelopment,andthereforesmallspecication
changesmaynotbereectedinthismanual.Images,labels,packaging,accessoriesandproduct
coloursaresubjecttochangewithoutnotice.
3
Speaker & Microphone Components
Product Overview
Window intercom systems provide assistance for clear communication where
normal speech is impaired by use of glass, a security screen or other similar
barriers.
There is an optional hearing loop facility, providing additional assistance for
hearingdevicewearers.
1. Installation and User Manual
2. Amplier
3. IEC Lead
4. Power Supply
5. HearingLoopAerial
(optional)
Fixing Kit:
• Adhesive Clip x 10
• No.6x1/2”CountersunkScrewsx15
• P-Clips x 6
5
General Components
1. Speaker Pod x 2
2. Mouse Microphone x 2
3. Double-Sided Fixing Pads x 2
2
1
3
4
3
2
1
4
Connections
LED connection or alert tone (if required)
CondenceLEDtoconrmthesystemispowered
oranalerttonefortheattentionofsta
Stamicrophone
Customer/visitor microphone
CondenceLED(ifrequired)forstatusalerts
and fault detection
Hearing loop aerial
Line in connection for
external audio source
Staspeaker
Customer/visitor speaker
Power input
connection
Use power supply
through ground
supply only
5
Negative -
or screened cable
Positive +
Werecommendthatinstallationiscarriedoutbyaqualiedengineer,
adheringtorelevantstandards.
Checkthecontentsoftheboxtofamiliariseyourselfwiththecomponents.
Installation Instructions
A basic toolkit recommended to install the system will include:
Trim cables if necessary (excluding the power supply)
to the required length to connect to the back of the
amplier.Bareapproximately6mmofthecableendsto
connecttothe2pinplugs.
• Wire Cutters/Strippers
• Tape Measure
• Pencil or Marker Pen
• Cable Ties
• Trunking
• Screwdrivers(FlatorBlade2.5mm
and Phillips Head PH2)
• BatteryorMainsDrill
• Drillbits: 2mm, 3mm, 5mm and 7mm
• Cable Tacking Gun (10mm)
Recommended Tools
Staff Counter Side
Customer / Visitor
Counter Side
Speaker Pods
Mouse Microphones
6
1. Placetheamplierunderthestacounter,ensuringthatitwillnot
obstructstawhentheyaresitting.
2. Markthefourxingpointsfortheamplierunderthecounter.
4. Drillandxtheamplierinplaceusingthesuppliedscrews.
6. Installtheamplier’spowersupplyclosetoapowersocketoutletusing
thesuppliedmountingbracketandxingscrews.
Fixing points
AmplierInstallation
7
1. Place a speaker pod on the customer/visitor side of the counter top,
ensuringitdoesnotcauseanobstruction.
Microphone & Speaker Installation
2. Place a mouse microphone on the customer/
visitor side of the counter top, ensuring it
does not cause an obstruction and is as close
tocustomers/visitorsaspossible.
For best performance all mouse microphones
shouldbettedfacingtheuserasshownin
Mouse microphone direction
theimageontheright.Therecommendedminimumdistancebetween
themousemicrophonesandspeakerpodsis300mm.
3. Placeaspeakerpodonthestasideofthecountertop,ensuringitdoes
notcauseanobstruction.
4. Placeamousemicrophoneonthestasideofthecountertop,ensuringit
doesnotcauseanobstructionandisasclosetostaaspossible.
5. Speakerpodscanbeeitherfreestandingorxed.Movetostep11ifyou
donotwishtoxthespeakerpodstothecounter.
6. Use cable management holes in the counter to run speaker pod and
mousemicrophonecablestotheamplier.Iftherearenotalreadycable
managementholes,drillsuitablelocationsneartherearofboththesta
andcustomer/visitorsidesofthecounter.
Staff Counter Side
Customer / Visitor
Counter Side
Speaker Pods
Mouse Microphones
8
7. Removethetopofthespeakerpodstogainaccesstothexingpoints.
8. Markthetwoxingpointsonthebottomofbothspeakerpods.Then
mark two cable holes to be drilled, one for both the customer/visitor side
andthestaside.
9. Ensuretherewillbeaccesstoretrievethecablesthendrilltheholes.
10. Fixthespeakerpodstotheirrespectivecounters.
11. Toxthemousemicrophonestoasurface,usetheprovideddouble-sided
xingpadorscreweachthroughthescrew-holeintheircap.
12. Feedthewiresthroughthecablemanagementholes.
13. Avoidlooseortrailingcables.Usetrunkingortopreventtriphazardsor
unitsbeingtuggedfromtheirposition.
14. Routeallcablingneatlytotheamplierlocationonthestaside.
9
Theaerialshouldbexedunderthedesk-toporcountercentrallyonthe
customerorvisitorside,onehalfmountedhorizontallyunderthecounterand
theotherhalfmountedvertically,facingthecustomer/visitor(asintherst
scenariobelow).
Position the aerial under the counter using either the provided P-clips
oranotherxingmethodofyourchoice.Seethediagrambelowfor
recommendedpositioning.
Aistheoptimumlayoutforacounterhearingloop.
BandCareacceptableonlyifAisnotpossibleandthelayoutisalignedso
thatthemagneticeldwillbedirectedtowardsuser’sheadheights.
Ensureallhearingloopsignageisdisplayedclearly.
X
X
Hearing Loop Installation
(Optional)
A B C
10
AmplierSetup
1. Connectallgreenplugstothebackoftheamplier,followingthe
locationsprintedabovethesockets(seepage4).
2. PowerontheamplierbypressingtheOn/Obutton.
3. Whenpoweredandinnormaloperationalmodetheamplierwilldisplay
VolumeInLED1andVolumeOutLED1assteadygreen.
4. Whentheamplierisswitchedo,allaudioismutedandnoneofthe
LEDsareilluminated.Pressinganybuttonwillturntheamplieronagain.
5. AdjustVolumeInandVolumeOuttoacomfortablelevel.
6. Press and hold the Volume In (+) or (-) buttons to increase or decrease the
level.ThecorrespondingLEDbarwillshowthevolumesetting.
6. Ensure the mouse microphones are placed as close to their intended
usersaspossible.
7. Checktheamplierisfullyfunctionalbyensuringthered‘fault’lightis
NOTshowingonthefront.
8. The Amplifier is now set up.
OurWindowIntercomSystemampliersarepre-settovolumelevels
suitablefornearlyallusers.ShouldyouneedtoadjusttheMaximum
Volume,DuckingorHearingLooplevelsoutsideofthepre-setamplier
parameters,useEngineer’sMode(seepage13).
Overview of Front Panel Buttons
Setup
Volume In (Customer/Visitor to Staff)
Increase and decrease
Volume Out (Staff to Customer/Visitor)
Increase and decrease
Settings
On/O
Table des matières
Autres manuels Audio Système d'interphone
