Audio Precision RAK-515 Manuel utilisateur
Figure 1. APx515 and rackmount shelf adapter, mounted in 19" rack.
Introduction
The hardware included in this kit allows the Audio Precision
APx515 analyzer to be rack mounted using a shelf rackmount
adapter.
Three mounting methods are described below. In all cases,
the APx515 Aux control connectors, PC connection, and
mains power connection are made from the rear of the rack.
The mains power switch and fuse module are also accessible
from the rear.
Audio Precision
RAK-515 Instructions
Rackmounting kit for the APx515 audio analyzer
Ref. Description AP Part No.
A 1 each rack shelf 7171.0515
B 4 each 10-32 x 5/16" Phillips truss
head screw, painted dark gray
5115.4116.6
C4 each 6-32 x 9/16" Phillips at
head screw, painted dark gray
5113.1118.6
Mounting Option I: Unsecured shelf mounting (Figure 1)
Step 1. Using the 4 10-32 5/16" screws (B), mount the shelf in a standard 19" equipment rack.
Step 2. Set the APx515 instrument on the shelf, being sure that the rubber feet sit in the indentations in the shelf. See
Figure 2. Use indentations (D) for ush mounting, or indentations (E) for recessed mounting.
Caution: Instrument is unsecured when using Mounting Option I, and under certain circumstances may shift or fall. Use
Mounting Option II or Mounting Option III for secure rack mounting.
B
B
B
B
Parts List:
Mounting Option II: Secured shelf mounting (Figure 2)
Step 1. Place the APx515 instrument upside down on a workspace. Using a Phillips screwdriver, remove the 4 rubber feet from the
chassis bottom. The 4 mounting screws will not be reused.
Step 2. Center each foot (without screws) over the mounting holes on the chassis bottom.
Step 3. Turn the shelf upside down and place it over the APx515 chassis bottom, with the rubber feet in between. Align the shelf so that
the feet are under the indentations at (D) for ush mounting, or at (E) for recessed mounting.
Step 4. Insert the 4 6-32 x 9/16" screws (C) through the screw holes in the shelf indentations, through the rubber feet, and into the
tapped mounting holes in the APx515 chassis bottom.
Step 5. Using the 4 10-32 5/16" screws (B), mount the assembled shelf and APx515 instrument in a standard 19" equipment rack. See
Figure 1.
Figure 2. Mounting APx515 securely to rack shelf.
D
C
C
C
E
E
D
D
ASSEMBLY DETAIL
FOOT
CASE
TRAY
SCREW
Mounting Option III: Optional slide adapters for APx515 (Figure 3)
Step 1. Order compatible rack slides from a third party manufacturer. Audio Precision does not sell rack slides for this product. We
recommend General Devices slide part number C-300-S-1xx, and the C-300 optional mounting brackets ([email protected],
or 317-897-7000). The “xx” in the part number listed here represents the length of the slide, which will vary depending upon your rack
depth and application. Please consult with a General Devices sales engineer to determine the correct length.
Caution: It is essential that the rack slides be supported at both the front and the rear of the rack. Mounting the rack slide to the front
of the rack only will result in mechanical failure. You must order and install the correct rear mounting brackets (K) for your rack and
application. Please consult with a General Devices sales engineer to determine the correct rear mounting brackets.
Step 2. Perform Steps 1–4 for Mounting Option II, on the previous page.
Step 3. Mount the two “chassis sections” (F) of the C-300-S slide to the sides of the rack mounting shelf, using hardward (G) provided
with the slide. Follow the slide manufacturer’s instructions and guidelines.
Step 4. Mount the two “stationary sections” (H) of the C-300-S slide in the 19" rack. Follow the slide manufacturer’s instructions and
guidelines. Be sure to attach these parts to both the front and the rear of the rack, using rear mounting brackets (K).
Step 5. Slide the assembled shelf, APx515 instrument and slide chassis sections into the slide stationary sections. Follow the slide
manufacturer’s instructions and guidelines.
Figure 3. Attaching rack slide sections to rackmount shelf.
F
F
G
K
H
5750 SW Arctic Drive
Beaverton OR 97005
1-800-231-7350
www.ap.com
X09221006 8211.0284 r0
Autres manuels Audio Precision Support et étagère
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
