AUDAC CSE55 Instructions d'installation et d'utilisation

PROFESSIONAL AUDIO EQUIPMENT

Ceiling Speaker + Signal LED CSE55

UserManual&InstallationGuide

Ceilingspeaker

+SignalLED

CSE55

AUDAC

A U D A C P R O F E S S I O N A L A U D I O E Q U I P M E N T

User Manual & Installation Guide

AUDAC

http://www.audac.eu

info@audac.eu

Introduction

The CSE55 is a single cone loudspeaker with an integrated red signal light with 6 integrated high intensity

LEDS (24 V), which emit a visual evacuation signal. The ceiling speaker is specially designed to deliver high-

quality speech reproduction, but can also be used for background music. It is standard fitted with a 100 Volt

line transformer with connections for different powers. The speaker combines professional audio equipment

with great design and comfort.

Warning

Only use the correct amplifier output voltage and impedance, exceeding these limits could cause fire

or other failures.

Avoid explosions: do not use the speaker around gasoline, thinner or other combustibles.

Only install the speaker in locations that can structurally support the weight of the speaker and the

mounting bracket. Not doing this may result in the speaker falling down.

Do not use any other method than specified to mount the bracket. If extreme force is applied to the

speaker,

it could fall down.

Avoid mounting the speaker in locations exposed to constant vibrations. The mounting bracket can be

damaged by excessive vibration, potentially causing the speaker to fall down.

Caution

Avoid electric shocks: switch off the amplifier power when connecting the speaker.

Avoid installing the speaker in locations exposed to solvents, acids, smoke and heaters, as excessive

exposure to these factors could result in speaker failure, fire or electric shock.

Do not operate the speaker for an extended period of time at distorted sound. This could cause

(irreparable) damage to the speaker.

Do not stand or sit on it, nor hang down from the speaker as this may cause it to fall down or drop.

Installation

Make a hole with a diameter of 165mm. This is very easy when you use the carton that is inside of the

box.

Take the grille from the speaker and put the speaker in the hole.

Tighten the screws of the speaker so that the speaker will be clasped on the ceiling or wall.

Inside of the box, you can find gums. Put these gums on the sides of the grille. Then put the grille on

the speaker. The gums on the sides of the grille will prevent the grille from falling down.

Connections

Impedance

Connect the speaker according to the desired power, according to the following scheme.

Connect the power supply for the LED also according to the following scheme. Pay attention that

you don’t put power on the inputs of the speaker.

If you use different speakers in the same place, make sure that you use the same polarity for all the

speakers.

The total power of all connected speakers may not exceed the output power of the amplifier.

Technical specifications

Speaker

Nominal Speaker Power: 15 W

Sound pressure: 1W / 1m 90 dB

Maximum SPL: 100.8 dB

Impedance Loudspeaker: 8 Ohm

Impedance line transformer: 1.600 Ohm/ 6 W

3.300 Ohm/ 3 W

6.600 Ohm/1.5 W

Frequency range: 70 - 14.000 Hz

Outside diameter: 200 mm

Installation depth: 70 mm

Cut-out measurement: 165 mm

Color: White RAL 9010

Weight: 1 kg

Option Available in other RAL colors

LED

Power: 24V (20V-30V)

Current: 45mA (@ 24V)

Angle: 120°

Light Intensity: 24 lumen

Color: Red

Dimensions (Diameter x Height): Ø 44 mm x 24 mm

Weight : 17 gr.

Housing: White ABS bottom with transparent cap.

Length connection cables : 80 mm

Table des matières

Autres manuels AUDAC Intervenants

AUDAC

AUDAC ATEO2S Mode d’emploi

AUDAC

AUDAC GIAX Instructions d'installation et d'utilisation

AUDAC

AUDAC CELO6 Mode d’emploi

AUDAC

AUDAC MERO5 Mode d’emploi

AUDAC

AUDAC AWP06 Instructions d'installation et d'utilisation

AUDAC

AUDAC AXIR Instructions d'installation et d'utilisation

AUDAC

AUDAC KYRA12/O Series Mode d’emploi

AUDAC

AUDAC VEXO112A Manuel utilisateur

AUDAC

AUDAC MBK523/G Manuel utilisateur

AUDAC

AUDAC CELO5 Mode d’emploi

AUDAC

AUDAC CIRA506 Manuel utilisateur

AUDAC

AUDAC AXIR Instructions d'installation et d'utilisation

AUDAC

AUDAC SPRING-FIT CENA510D Manuel utilisateur

AUDAC

AUDAC WS524 Manuel utilisateur

AUDAC

AUDAC MTX Manuel utilisateur

AUDAC

AUDAC CS85 Instructions d'installation et d'utilisation

AUDAC

AUDAC Outdoor Series Mode d’emploi

AUDAC

AUDAC VEXO110A Manuel utilisateur

AUDAC

AUDAC LINO4 Mode d’emploi

AUDAC

AUDAC Ateo 4D Mode d’emploi

AUDAC

AUDAC CS74 Manuel utilisateur

AUDAC

AUDAC Ateo 2 Mode d’emploi

AUDAC

AUDAC KYRA Series Mode d’emploi

AUDAC

AUDAC AWP06 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur