Atronix Trove1V1R Manuel utilisateur

Rev. TVR112818

Trove1V1R

- Trove rack enclosure with Altronix/HID VertX®backplane (TV1R)

Installation Guide

All registered trademarks are property of their respective owners. More than just power.™

Installing Company: _____________________ Service Rep. Name: __________________________________________

Address: ________________________________________________________ Phone #: _________________________

Access & Power Integration

- 2 - Trove1V1R

Overview:

Altronix Trove1V1R rack mount access & power integration solution accommodates various combinations of HID VertX®boards with or

without Altronix power supplies and accessories for access systems.

Specifications:

Backplane Accommodates a Combination of the Following:

Hardware and Accessories:

Agency Listings:

• CE European Conformity.

Trove1V1R

Trove1R rack mount enclosure with

TV1R Altronix/HID VertX®backplane.

• 16 Gauge black enclosure with ample knockouts for

convenient access.

• Modular 2U standard EIA 19” drawer with

extendable slides up to 48”.

• Dimensions (H x W x D): 3.25” x 19.0” x 26.5”

(82.6mm x 482.6mm x 673.1mm).

• Includes tamper switch (Altronix Model TS112 or equivalent)

and cam lock.

TV1R

Altronix/HID VertX®backplane.

• 16 Gauge backplane.

• Dimensions (H x W x D): 18.5” x 15.25” x 0.3125”

(469.9mm x 387.4mm x 7.9mm).

Optional Accessories:

• RE2: Rack Mount Battery Enclosure accommodates up to four (4)

12VDC/7AH batteries

• WM5, WM25, WM100: Magnetic Cable Tie Mounts

(5, 25, 100 counts).

• LC3: 6 ft. three-wire line cord.

Altronix:

• Up to two (2) eFlow4NB, eFlow6NB, eFlow102NB,

eFlow104NB, ACMS8(CB) or ACM8(CB).

• Up to three (3) ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB),

PDS8(CB), or VR6..

HID VertX®:

• Up to six (6) V100, V200, V300, V1000 or V2000.

Spacer | 7/8” Pan Head Screw | Lock Nut

Trove1V1R - 3 -

Fig. 2

Fig. 2a

Hardware (included):

Ten (10) bolts and eight (8) lock nuts

Two (2)

Fig. 1

Fig. 1b

Fig. 1a

Assembling and Attaching Z Bracket Wire Management Accessory (included):

Altronix Trove Rack enclosures include Z Bracket, a convenient and reliable wire management accessory.

1. Carefully unpack Z Bracket. Do not discard hardware (included) (Fig. 1, pg. 3).

2. Attach arms to each other using bolts and lock nuts (Fig. 1a, pg. 3).

3. Attach the hinge brackets to the ends of arms using bolts and nuts positioning them as shown on Fig. 1b, pg. 3.

4. Make sure that all nuts are tightened.

5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable rail using bolts and lock nuts (included) (Fig. 2, 2a, pg. 3).

6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts (included).

- 4 - Trove1V1R

Installation Instructions for Trove1R:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having

jurisdiction. Product is intended for indoor use only.

1. Remove backplane from enclosure prior to installing into rack cabinet (do not discard hardware).

2. In order to mount included UL Listed tamper switch (Altronix Model TS112 or equivalent), turn the enclosure upside down.

Punch out the knockout in designated location, on the back of the unit, from outside of the drawer (Fig. 3, pg. 4).

Insert the tamper switch into the knockout from outside of the drawer with the button facing outwards and spaded connectors inside

the drawer. Connect tamper switch wiring to the Access Control Panel input or the appropriate UL Listed reporting device.

To activate alarm signal open the rack drawer.

3. Slide the Trove rack enclosure into an open 2U location in the rack cabinet.

4. Utilizing proper fasteners attach front ears to the rack rails.

5. Attach the rear of the adjustable slides to the rear rails of the rack cabinet with the proper fasteners.

6. Make sure that all internal cofigurations (wiring, voltage selection, switch settings, etc.) are complete before mounting backplane back

into enclosure.

7. After all components are mounted on the backplane, attach it to the enclosure using included hardware.

Fig. 3

Tamper Switch mounting location

Back of the drawer,

viewed from outside.

Trove1V1R - 5 -

TV1R: Configuration of Altronix Power Supply and/or Sub-Assembly Boards

1. Fasten spacers onto metal pems configuration (A) or (B) of backplane depending on the power supply and/or Sub-Assembly

(Fig. 4, pg. 5).

2. Position access controller module over corresponding spacers and fasten screws into spacers (Fig. 4a, pg. 5).

3. Mount backplane to enclosure with hardware.

Position Chart for the Following Models:

Altronix Power Supply/Charger or Sub-Assembly Pem Mounting

eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB, ACMS8(CB), or ACM8(CB) A

ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), or VR6 B

Fig. 4

Metal

Spacer

Placement

for Altronix

Power

Supplies

Metal

Spacer

Placement

for Altronix

Power

Supplies

Pem

Spacer

Backplane

Power Supply or

Sub-Assembly

Pan Head Screw

Fig. 4a

- 6 - Trove1V1R

TV1R: Configuration of HID VertX®Boards

1. Fasten spacers onto metal pems configuration (A) of backplane (Fig. 5, pg. 4).

2. Position access controller module over corresponding spacers and fasten screws into spacers (Fig. 5a, pg. 4).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

HID VertX® Sub-Assembly Pem Mounting

V100

V200

V300

V1000

V2000

Fig. 5

Pem

Spacer

Backplane

Power Supply or

Sub-Assembly

Pan Head Screw

Fig. 5a

Trove1V1R - 7 -

Notes:

- 8 - Trove1V1R

Trove1R Enclosure Dimensions (H x W x D):

3.25” x 19.0” x 26.5” (82.6mm x 482.6mm x 673.1mm). Shown with Z Bracket attached.

3.25”

82.3mm

26.5”

673.1mm

19” (482.6mm)

2.4”

61mm

4.57”

116.1mm

11.175” (283.8mm)

R 1.27” (32.3mm)

1” (25.4mm)

0.55” (14mm)

3.62”

92mm

0.1”

2.5mm

1.5”

38.1mm

Altronix is not responsible for any typographical errors.

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

web site: www.altronix.com | e-mail: [email protected] | Made in U.S.A.

IITrove1V1R H24T

MEMBER

Table des matières

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur