Atop CloudProof M1000 serious Manuel utilisateur
Atop Technologies
www.cloudproof.com.tw
CLOUDPROOF USER MANUAL
MODEL-APPLIED:MSERIOUS
APPLICABLE VERSION:2.0.X
CLOUDPROOF USER MANUAL
1
Directory
Version Claims, Version Acknowledgement .......................................................................... 2
Chapter 1. Introduction and Quick Install........................................................................... 3
1-1. Production Introduction........................................................................................ 3
1-2. Hardware Installation introduction....................................................................... 4
1-3. Network Environment setup................................................................................. 6
Chapter 2. Account management....................................................................................... 9
2-1. Google Apps Registration...................................................................................... 9
2-2. Account creation and modification..................................................................... 12
2-3. Account synchronization..................................................................................... 17
Chapter 3. User Interface ................................................................................................. 20
3-1. Login Page ........................................................................................................... 20
3-2. Mail function .............................................................................................................. 32
3-3. File function......................................................................................................... 40
3-4. Contacts............................................................................................................... 43
Chapter 4. Administrator Page ......................................................................................... 46
4-1. Network Setup and Net Management ................................................................ 46
4-2. System setup ....................................................................................................... 55
4-3. Diagnostic function.............................................................................................. 57
4-4. Configuration File and Firmware upgrade .......................................................... 59
Chapter 5. Advanced Application ..................................................................................... 62
FAQ ........................................................................................................................................ 62
CLOUDPROOF USER MANUAL
2
Version Claims, Version Acknowledgement
Legal Notices
Trademarks
Trademarks used in this text: Google and Google Apps are trademarks of Google
Corporation.
Standards Compliance
CE/FCC.
Acknowledgments
This product includes software developed by the At mail project
(http://atmail.org) which is under the Apache 2.0 Open Source license
http://www.apache.org/licenses/LICENSE-2.0.html
This product includes software developed by the ElFinder project
(http://elrte.org/elfinder) which is under the 3-clauses BSD license
http://www.opensource.org/licenses/BSD-3-Clause.
CLOUDPROOF USER MANUAL
3
Chapter 1. Introduction and Quick Install
1-1. Production Introduction
The Main purpose of ClouldProof M serious is to help organizations manipulate
cloud computing infrastructure in a flexible and reliable way, while they deploy
cloud service. Also, a value added service can be achieved by utilizing a hybrid cloud
model that makes the interoperability between public and private cloud.
ClouldProof M serious versions provide the interoperability with Google Apps. In a
common deployment, the CloudProof appliance is placed at an organization’s data
center with an IP configured that computers located in the organization can directly
connect to it.
The hardware installation is introduced in sectionn1-2, while the network setup is
introduced in section 1-3. Next, CloudProof M serious requires the creation of
information related to the public cloud. Section 2-1 includes configurations for
setting up connection with Google Apps. Section 2-2 includes configurations to
establish user account. After that, users can login CloudProof M serious, and begin
to use the related functions; please refer to chapter 3 for the detailed configuration.
Administrators can configure and manage the network and storage related functions
of CloudProof M serious; please refer to Chapter 4 for the detailed configuration.
CLOUDPROOF USER MANUAL
4
1-2. Hardware Installation introduction
1. Front panel introduction
Fig. 1-4
Main Part
Ethernet Port: 6 Ethernet ports including both M1000 and M2000 serious.
Console Port: 8-pin serial port interface, for vender maintenance.
POWER: LED showing green light, indicates the appliance is at booting
status.
H.D.D: LED showing fleshing light, indicates the system is reading or
storing data from to to the built-in hard disk.
LCD: LCD interface provides simple information for management use.
Button1~4: 4 buttons for controlling LCD interface.
Reserved Part(current not used)
B/P1, B/P2: Bypass LED, Green light indicates normal mode, red light
indicates bypass mode.
USB: 2 USB ports
RESET：Reset hidden button
CLOUDPROOF USER MANUAL
5
2. Rear panel introduction
Fig. 1-5
Ethernet port usage description
There are 6 Ethernet ports, and each has its respective function as below:
Port 1: Failover link port, Provides for Backup network link.
Port 2: Basic Link port
Port 3: Basic Link port
Port 4: Basic Link port
Port 5: Admin port, for administrator link use, default ip is 192.168.119.119.
Port 6: HA port, For High Availability function
Install introduction
There are 2 built-in hard disks which have been formatted for access by the
host. First time using this machine; please use Ethernet cable to connect to the
5th port on the host from a PC or NB which you use to configure the host. Since
the default IP of the host is 192.168.119.119, so it is necessary to configure the
PC or NB’s IP as 192.168.119.xxx, then connecting to the host’s web page and
starting to setup the network.
CLOUDPROOF USER MANUAL
6
1-3. Network Environment setup
1. First, please connect to the 5th port on the host from the administrator’s
computer, directly or through a switch. Then, change the IP address of the
administrator’s computer to 192.168.119.2, subnet mask to 255.255.255.0,
as through Control Panel -> Network Link -> LAN -> Content, (refer to Fig.
1-5).
Fig. 1-5
2. Start web browser (IE or Firefox), and key in the URL as
http://192.168.119.119, then the login page will show up.
3. Since the default administrator’s account name is “admin”, on the login page,
key in “admin” as User Name and its default password “XXXXXXXX” as
Password. Then press “Login”.
CLOUDPROOF USER MANUAL
7
Fig. 1-6
4. After successful Login, it will show up the Admin system setup page. There
are 2 parts on it, Menu section and Data setup section.
Fig. 1-7
Menu Section
All of the function menu lists are here; they are designed as 2 layer menu.
Data setup Section
That’s where we configure the related parameter items.
CLOUDPROOF USER MANUAL
8
5. Setup the basic network connectivity function: Network Setup -> Basic Net
Setup
Select NIC
Select which port to setup for service (Please use an additional cable to
connect this port to a switch).
CloudProof IP
Setup the IP address for providing the CloudProof service.
Subnet Mask
Setup the subnet mask
Gateway
Setup the Gateway IP.
Every entry needs be configured, and then press “Apply”.
6. So far, in order to verify the configuration processes are right, we can
change the previous administrator computer’s IP to an IP within the same
LAN as configured in STEP 5, and then connect the computer to the
configured service port, starting web browser and keying in the URL as the
configured service IP, and then make sure if the CloudProof login page
shows up.
CLOUDPROOF USER MANUAL
9
Chapter 2. Account management
2-1. Google Apps Registration
Google Apps registration includes 2 parts, to register your domain on Google and to
certify your domain using DNS. Then configure to store the registered domain related
information in CloudProof. And then open the mail service under the registered domain
on Google APPS, so now CloudProof can begin to synchronize with.
1. Register your Domain on Google APPS
Login to Admin page, click through “Google APPS -> DS Register in GAS Service”,
then the following page will show up.
Fig. 2-1
2. Notice that, if you haven’t registered Domain on Google APPS, at first, you need
to press “Register Domain on Google APPS” to register your Domain. If you
already have Google APPS Domain, please go to step 3 directly. Now, we assume
you haven’t, so please press “Register Domain on Google APPS”. It will lead you
to the Domain registering page on Google APPS as below; here please follow
Google APPS’s registering steps.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Atop Changer
Atop
Atop EMG8510 Series Manuel
Atop
Atop RHG7528 Series Manuel
Atop
Atop EMG8305 Series Manuel
Atop
Atop EHG9508 Series Manuel
Atop
Atop EH2316 Series Manuel
Atop
Atop EHG75 series Manuel utilisateur
Atop
Atop EHG3005 Series Manuel
Atop
Atop EH7506-4PoE-2SFP Manuel utilisateur
Atop
Atop EHG7504 Manuel
Atop
Atop EHG7305 Series Manuel utilisateur
