ATN Binox-thd Manuel utilisateur

THERMAL SMART HD BINOCULARS

MANUAL

ATN BinoX-THD USER’S GUIDE (REV. 2, JUNE, 2016)

AMERICAN

TECHNOLOGIES

NETWORK

CORP.

BinoX-THD

THIS PRODUCT CONTAINS NATURAL RUBBER LATEX WHICH MAY CAUSE ALLERGIC REACTIONS.

CAUTION!

The information in this manual is furnished for informational use only, is subject to change without notice,

is not to be construed as a commitment by ATN Corp.

ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.

BATTERY

HOUSING COVER

TRIPOD THREAD

MICROSD, MICRO HDMI

& MICRO USB

START/STOP

VIDEO RECORDING

ENTER

BUTTON

TAKE A PICTURE

ZOOM IN

DIOPTER

ADJUSTMENT

POWER BUTTON

FOCUS

ADJUSTMENT

RING

ZOOM OUT

TABLE OF CONTENTS

Features .........................................4

Application .......................................4

Specifications.....................................4

Preparing the device ...............................5

Unpacking .....................................5

Installation of batteries............................5

MicroSD, USB and HDMI ports .....................5

Firmware update ................................6

ON/OFF.......................................7

Using your keypad ...............................7

Focusing ......................................7

Compass calibration .............................8

Interface .........................................9

Homescreen ...................................9

Main operations................................10

Shortcut carousel ..............................11

Using System menu.............................12

Functions .......................................14

Photo and video modes ..........................14

Rangefinder...................................16

How to perform a NUC...........................17

System Menu ....................................18

Thermal ......................................18

Photo/Video...................................18

Display.......................................18

Settings ......................................19

Servicing ........................................20

Warnings and cautions ..........................20

Mobile Applications ...............................20

FEATURES

RECORD HD VIDEO GEOTAGGING

Wi-Fi OBSIDIAN USER INTERFACE

SMOOTH ZOOM 3D GYROSCOPE

ECOMPASS

SPECIFICATIONS

Item BinoX THD 384

4.5x—18x

BinoX THD 640

2.5x—25x

Sensor 384

288 640

480

Magnification 4.5x–18x 2.5x–25x

Angle of view 6

4.7 12.5

9.7

Objective lens focal length 50 mm

Micro Display 960

540

Core ATN Obsidian “TII”

Interpupillary adjustment range 60–70 mm

Waterproof rating / IP rating Weather resistant

Video Record Resolution 1280

960 @ 30 fps

Microphone Ye s

WiFi (Streaming, Gallery, & Controls) iOS & Android

GPS (Geotagging, Elevation, etc.) Ye s

Battery life (Li-ion) 6–8 hr

Battery type (3) CR 123

* ATN reserves the right to change the above specifications at any time without notice

APPLICATION

No longer do thermal binoculars need to be expensive and clunky. The Ther-

mal BinoX is here to provide you with unprecedented capabilities at a fraction of

the cost. Well designed, ergonomic and sporting a professional 50 mm germanium

lens, the Thermal BinoX is a pleasure to behold.

384x288 and 640x480 configurations to provide sharp and clear images. Like the

rest of the Smart HD series of optics, the Obsidian “TII” core utilizes a slew of sen-

sors to seamlessly gather information about your environment. Record video and

capture photos directly to your microSD card or stream them to your mobile device

through the built-in Wi-Fi. The Thermal BinoX comes with more features than you will

know what to do with at first, but soon you won’t know how you lived without them.

SMART RANGE FINDER

PREPARING THE DEVICE

UNPACKING

The following steps must be accomplished prior to each mission where the device

is used:

1. Open packaging box, remove Thermal BinoX-THD and check the contents

2. Make sure that nothing is missing

3. Inspect the device for damage to optical surfaces, body, eyecups, operation

buttons, etc.

4. Ensure that all optical surfaces are clean and ready for use.

NOTE

If any accessories are missing or broken contact ATN’s Customer Service.

INSTALLATION OF BATTERIES

The Thermal BinoX-THD will operate on three CR123 type batteries.

NOTE

We highly recommend using lithium

CR123 batteries. They will provide much

longer battery life.

Install batteries as follows:

1. Remove the Battery Cover following the

arrow direction

2. Insert batteries as shown.

3. Close the Battery Cover.

NOTE

Make sure that the device is turned off

before changing sources of energy (batte-

ries or USB in power supply mode).

MicroSD, USB AND HDMI PORTS

The device is equipped with microSD, Micro USB and Micro HDMI ports. You can

find them under the rubber cover near the battery block (we marked the cap with

appropriate icons).

To open the cover you should gently lift the

rubber cover and move it out of the way.

NOTE

Make sure that the device is turned off before

inserting the microSD card into the slot.

1. A new card should be formatted before

usage.

2. Insert microSD card as shown.

3. To lock the card in the slot push it in with a thin

object (a small coin, paper clip, toothpick, etc.).

SMART RANGE FINDER

4. Return the cover to its original position.

NOTE

There is only one correct direction to insert

the microSD Card.

Do not force the card into the slot as it may

damage both the device and the card itself.

To remove the microSD Card from the slot,

push it in using the same thin object. When it

pops up a few millimeters, it can be pulled with

your fingers or tweezers.

NOTE

If you are going to record video we recom-

mend using a Class 10 microSD card (10 MB/s)

or faster and have capacity from 4 to 64 GB.

FIRMWARE UPDATE

Before operating your device please update

the firmware to the latest version.

To receive a notification of new firmware

updates, please register your device on our website (you’ll receive an email letting

you know when new firmware becomes available).

To update the new firmware you will need a microSD Card and batteries that are

fully charged.

NOTE

In the event of a power failure during an update the device may crash corrupt-

ing its system files and will need to be sent back to the ATN factory for service.

It is important not to use additional sources of power during firmware update!

Update the new firmware as follows:

1. Download the ***.bin file and copy to

your microSD Card – root directory.

2. Insert the card into the device.

3. Turn ON the device.

4. In the “Firmware Update” dialog box

select “Yes” to start the update.

5. When the update counter reaches

“100%” the device will automatically restart.

6. Once the device is powered up it will enter self configuration mode.

7. After completion, it will automatically restart and will be ready for use.

8. Motion Sensing platform will be configured when first turned on.

NOTE

If the device does not restart within 30 seconds, remove and re-insert the

batteries and power-up the device.

Once the device has been updated you will need to either format the card or

delete the update file manually. In the event you do not, the system will ask you

if you wish to update the device every time you turn it on.

ON/OFF

To TURN ON the device press

and hold the POWER button until

you see the ATN splash screen.

To TURN OFF the device press

and hold the POWER button, until

the dialog box “Shut down the

device?” appears. Choose “Yes” to

turn off.

NOTE

Upon startup you must perform a NUC.

USING YOUR KEYPAD

The KEYPAD is programmed to be used in

two different ways:

• Short and Quick Taps — used for most

functions and to get around the menu;

• Press and Hold — designed to be used

in the following situations — ON/OFF, ZOOM,

SHORTCUT MENU.

NOTE

Using LEFT or RIGHT buttons in the menu,

lets you quickly Exit Shortcuts from any

position.

FOCUSING

DIOPTER ADJUSTMENT

By rotating the Diopter Adjustment Ring you will achieve optimal sharpness for

your vision. Look through the eyepiece while focusing on the interface on the screen.

Do not take the rubber cap off the objective lens.

NOTE

You should not need to re-adjust the Diopter Adjustment unless another

user with different vision than yourself will be using the device.

INTERPUPILLARY ADJUSTMENT

Depending on the distance between your eyes, you may adjust the individual eye-

pieces by moving each one horizontally.

MOUNTING ON A TRIPOD

The BinoX THD is tripod mountable and can be

mounted on tripods with a 1/4” thread mount.

COMPASS CALIBRATION

When the compass needs to be calibrated the word “CAL” appears instead of the

Compass Scale. To calibrate you should rotate the device on three axis as illus-

trated.

NOTE

After calibrating the device please

remember that the compass will work

best when holding the BinoX-THD

parallel to the ground.

Other possible Errors:

• ERR — an error was detected

(you may need to restart the device or

recalibrate the compass);

• SMF — your device is under

Strong Magnetic Field (please, move

away from the Magnetic Field);

• UPD — your firmware needs to

be updated.

INTERFACE

HOMESCREEN

First screen you’ll see after switching on the device is Homescreen. It consists of

Scales, Status Bar icons and different Informational Widgets.

SCALES

E-Compass Scale shows yaw angle based on e-Magnetometer data.

Roll Scale shows binocular cant based on internal 3D Gyroscope.

Pitch Scale shows binocular inclination based on internal 3D Gyroscope.

STATUS BAR

Its job is to display information about the current state of the system.

Currently inactive icons become invisible, so you will only see the important infor-

mation on the Homescreen Interface:

• Battery — appears when energy level is low

• SD Card — shows the presence or absence (red icon) of memory card

• Bluetooth, GPS and WiFi — show when the function is enabled.

WIDGETS

They are interface elements which provide quick access to useful information.

There are several types of widgets:

• Icons without value — are used for mode displaying (Photo and Video Modes)

• Only numerical value (Detailed Roll and Pitch Values)

• Icons with a numerical value which provide detailed numerical readings

• Photo Preview (appears in the bottom of the homescreen, after the photo is

taken).

Display widgets can be dis-

abled from the System Menu.

To get to the System Menu

you should click on the CENTER

button from Homescreen

and access the Shortcut Carou-

sel.

Then select the wrench icon

with RIGHT or LEFT buttons

and push CENTER button to

enter the menu.

Select Display tab with RIGHT

button and choose sub-

category Display Widgets with

DOWN button .

MAIN OPERATIONS

ZOOM LEVEL

By pressing and holding the UP or DOWN button on the keypad you will be

able to Zoom IN and OUT.

Current Zoom Level is displayed in the Zoom widget on the Homescreen.

TAKING PHOTOS

Press the LEFT button to TAKE A PHOTO.

Depending on the selected mode, you will make one or several photos. You can

choose from various photo modes in the System Menu.

VIDEO RECORDING

By pressing the RIGHT button you will be able to RECORD VIDEO.

NOTE

Your recording will automatically stop when the memory card is full or the

battery is out of power.

SHORTCUT CAROUSEL

The CENTER button opens the menu and closes it down when pressed again.

Table des matières

Autres manuels ATN Jumelles

Manuels Jumelles populaires d'autres marques

Celestron

Celestron VistaPix 72218 Manuel utilisateur

Levenhuk

Levenhuk Atom Digital DNM200 Manuel utilisateur

Bresser

Bresser TOPAS 7x50 Manuel utilisateur

Berger & Schroter

Berger & Schroter LN-G3-B50 Manuel utilisateur

Leica

Leica geovid 8x42 HD-R Manuel utilisateur

Noblex

Noblex NF 8 x 42 inception Manuel utilisateur

Newcon Optik

Newcon Optik AN Series Manuel utilisateur

PHOTONIS

PHOTONIS VYPER Manuel utilisateur

Famous Trails

Famous Trails ViewCatcher DCB 822 Manuel utilisateur

AGM

AGM EXPLORATOR FSB50-640 Manuel utilisateur

Opticron

Opticron Marine-3 7x50 BIF.GA Guide d'installation

Kayoba

Kayoba 009129 Manuel utilisateur

Vixen

Vixen ARENA Series Manuel utilisateur

MAGINON

MAGINON NVB 60 Manuel utilisateur

Leica

Leica Geovid 56 Manuel utilisateur

Leica

Leica GEOVID PRO Manuel utilisateur

Celestron

Celestron LandScout Manuel utilisateur

APM

APM ED Apo Series Manuel utilisateur

ATN binox-thd Manuel utilisateur

Manuels Jumelles populaires d'autres marques