ATN ODIN Manuel utilisateur

ATN ODIN

operator’s manual

Important Export Restrictions! Commodities, products,

technologies and services contained in this manual are

subject to one or more of the export control laws and

regulations of the U.S. Government and they fall under the

control jurisdiction of either the US Department of State

or the US BIS-Department of Commerce. It is unlawful

and strictly prohibited to export, or attempt to export or

otherwise transfer or sell any hardware or technical data or

furnish any service to any foreign person, whether abroad

or in the United States, for which a license or written

approval of the U.S. Government is required, without

first obtaining the required license or written approval

from the Department of the U.S. Government having

jurisdiction. Diversion contrary to U.S. law is prohibited.

OPERATOR’S MANUAL (ODIN) REVISION 1 – MARCH 2013

THERMAL MULTI-PURPOSE SYSTEM

www.atncorp.com/warranty

Manual (Odin) Revision 1 - MARCH, 2013

The information in this manual furnished for information use only, is subject to

change without notice, is not to be construed as a commitment by ATN Corp.

ATN Corp. assumes no responsibility or liability for any errors or inaccura-

cies that may appear in this book.

SAFETY SUMMARY

STUDY CAREFULLY THIS MANUAL BEFORE TURNING ON

AND OPERATING THIS PRODUCT.

CAUTIONS

The ATN Odin thermal multi-purpose system are precision

optical-electronic instruments and requires careful handling.

To provide safe use of the systems the following instructions

should be observed:

• Do not dismantle the device.

• Keep the device clean; protect it from moisture, sharp tem-

perature drops and shocks.

• Be careful not to touch the glass surfaces. If you put finger-

prints on, or contaminate the glass surfaces, use only clean

and soft materials to clean it.

•

Do not leave the device in on position during stops in operation.

• Remove the battery from the device for the period of storage.

THIS PRODUCT CONTAINS NATURAL RUBBER

LATEX WHICH MAY CAUSE ALLERGIC REACTIONS

CAUTION:

WARNING

Do not permanently attach the device to dynamic-mount applica-

tions that continuously transmit vibration (such as on vehicles or

heavy machinery).

WARNING

Do not point the monocular directly at any high-intensity objects

that you must not view with your eyes (such as the sun or a weld-

ing arc). If you do, you will damage the camera.

WARNING

Operating Odin outside of its specified operating temperature

range or voltage range can cause permanent damage and will

void the warranty.

WARNING

Use the power switch to turn the camera off before you remove

power (remove battery).

WARNING

Do not use any battery other than a CR-123A lithium battery. DO

NOT use any battery(ies) providing a (combined) voltage greater

than 3.0 volts.

WARNING

Do not replace battery in a possibly explosive environment, such

as a gas station (or any place where you must turn off your vehicle

engine). If you do, sparks can cause an explosion.

WARNING

Remove the battery before you store the camera for extended

periods (2 weeks or more).

WARNING

Do not carry battery in pockets containing metal objects such as

coins, keys, etc. Metal objects can cause the battery to short cir-

cuit and become very hot. In the case of lithium batteries, a short

circuit could cause them to explode.

WARNING

Observe battery manufacturer’s guidelines for safe handling and

proper disposal of batteries.

NOTE

Please be aware that the most common problem that first time

users of Thermal products encounter is improper utilization of

Calibrate/NUC function. The first step before using the product

should be to properly calibrate the device. To do this please turn

the unit on, close the objective lens with the lens cap and press

the Calibrate/NUC function either as described in 3.2.2.3 or by

holding down both the UP and DOWN buttons at the same time.

Please carefully read 3.2.2.3 as to additional information on Cali-

bration/NUC function.

EQUIPMENT LIMITATIONS

• The Odin detector spectral band (7 to 14 µm) provides a better

penetration through smoke, smog, dust, water vapor etc.

• Infrared radiation does not travel through glass and therefore

the monocular does not sense objects if they are behind a glass

window.

TABLE OF CONTENTS

pg.

CHAPTER 1. INTRODUCTION ........................1-1

1.1 General Information ...........................1-2

1.1.1. Scope ....................................1-2

1.1.2. Reports ...................................1-2

1.1.3. Storage ...................................1-2

1.1.4. Warranty Information ........................1-2

1.2. Equipment Description.........................1-5

1.2.1. Equipment characteristics, capabilities

and features ...............................1-5

1.2.2. Location and description of major components ....1-6

1.2.3. Specifications ..............................1-9

1.2.4. Mechanical Functions.......................1-11

1.2.5. Optical Functions ..........................1-11

1.2.6. Electrical Function .........................1-12

CHAPTER 2. ASSEMBLY AND PREPARATION...........2-1

2.1. Preparation ..................................2-2

2.1.1. Preparation for use ..........................2-2

2.1.2. Installation of eyecup ........................2-3

2.1.3. Installation of demist shield....................2-3

2.1.4. Installation and adjustment of headmount ........2-4

2.1.5. Installation of headmount/helmet mount adapter ...2-5

2.1.6. Installation of helmet mount to helmet. . . . . . . . . . . . 2-6

2.1.7. Installation of headmount with protective mask ....2-8

2.1.8. Installation of weapon mount ..................2-9

CHAPTER 3. OPERATION............................3-1

3.1. General Information ...........................3-2

3.1.1. General ...................................3-2

3.1.2. Controls and Indication .......................3-2

3.2. Operating procedure ..........................3-4

3.2.1. Turning On ................................3-4

3.2.2. Menu sets .................................3-4

3.2.3. Hand-held operation ........................3 -11

3.2.4. Head mounted operation ....................3 -11

3.2.5. Helmet mounted operation ...................3-13

3.2.6. Weapon mounted operation ..................3-15

3.2.7. Preparation for storage ......................3-16

CHAPTER 4. MAINTENANCE INSTRUCTIONS...........4-1

4.1. Lubrication Instructions........................4-2

4.2. Troubleshooting procedures....................4-2

4.2.1. Troubleshooting ............................4-2

4.3. Operator’s Maintenance Procedures .............4-5

4.3.1. Cleaning the scope ..........................4-5

4.3.2. Headmount Maintenance .....................4-5

4.3.3. Neck cord maintenance ......................4-7

iii

HOW TO USE THIS MANUAL

• Usage

You must familiarize yourself with the entire manual before operat-

ing the equipment. Read and follow all warning notices.

• Manual Overview

The table of contents includes the paragraph number, paragraph

title, and page number.

1-1

CHAPTER 1

INTRODUCTION

1-2

1.1 GENERAL INFORMATION

1.1.1. SCOPE

This manual contains instructions for use in operating and main-

taining the ATN Odin thermal multi-purpose systems. Throughout

this manual, the ATN Odin will be referred to as the scope or Odin.

1.1.2. REPORTS

Reports from the user on recommendations for improvements are

encouraged. Send reports to the address below.

American Technologies Network Corp.

1341 San Mateo Avenue

South San Francisco, CA 94080

(800) 910-2862

(650) 989-5100

(650) 875-0129 fax

info@atncorp.com

www.atncorp.com

1.1.3. STORAGE

Storage of Odin should be done in the factory packing and after a

thorough PMCS as outlined in Section 4.1. of this manual. This will

ensure the scope remains in mission ready condition during stor-

age. Battery should be stored separately from the scope.

The scope should not be placed on the floor, in any area exposed to

high temperatures or direct sunlight. Presence of acid and alkaline

vapor, as well as of other aggressive admixtures in the air is unac-

ceptable.

1.1.4. WARRANTY INFORMATION

ONE YEAR PRODUCT WARRANTY

This product is guaranteed to be free from manufacturing defects in material

and workmanship under normal use for a period of 1 (one) years from the date

of purchase. In the event a defect that is covered by the foregoing warranty

occurs during the applicable period stated above, ATN, at its option, will either

repair or replace the product, and such action on the part of ATN shall be the

full extent of ATN’s liability, and the Customer’s sole and exclusive remedy.

Table des matières

Autres manuels ATN Jumelles

ATN

ATN pvs14-3p Manuel utilisateur

ATN

ATN Night Scout Manuel utilisateur

ATN

ATN Night Spirit Manuel utilisateur

ATN

ATN 7x50RF Manuel utilisateur

ATN

ATN BinoX 4T Series Manuel utilisateur

ATN

ATN PVS7-3A Manuel utilisateur

ATN

ATN PVS7-3 Manuel utilisateur

ATN

ATN Viper Manuel utilisateur

ATN

ATN Night Shadow Night Shadow Binocular Manuel utilisateur

ATN

ATN Night shadow 4 Manuel utilisateur

ATN

ATN ots-14 Manuel utilisateur

ATN

ATN Night Shadow 2IA Manuel utilisateur

ATN

ATN NVG7-2 Manuel utilisateur

ATN

ATN OTS-15 Manuel utilisateur

ATN

ATN Night Jaguar Night Vision Binocular Manuel utilisateur

ATN

ATN FIITS14 w/CGTI IIT 9Hz Manuel utilisateur

ATN

ATN FIITS14 Manuel utilisateur

ATN

ATN PVS7-CGT Manuel utilisateur

ATN

ATN FIITS14 w/3I IIT Manuel utilisateur

ATN

ATN PS-23-3A Manuel utilisateur

ATN

ATN NV-560 Manuel utilisateur

ATN

ATN FIITS14 Manuel utilisateur

ATN

ATN Night Shadow Manuel utilisateur

ATN

ATN binox-thd Manuel utilisateur

Manuels Jumelles populaires d'autres marques

Celestron

Celestron VistaPix 72218 Manuel utilisateur

Levenhuk

Levenhuk Atom Digital DNM200 Manuel utilisateur

Bresser

Bresser TOPAS 7x50 Manuel utilisateur

Berger & Schroter

Berger & Schroter LN-G3-B50 Manuel utilisateur

Leica

Leica geovid 8x42 HD-R Manuel utilisateur

Noblex

Noblex NF 8 x 42 inception Manuel utilisateur

Newcon Optik

Newcon Optik AN Series Manuel utilisateur

PHOTONIS

PHOTONIS VYPER Manuel utilisateur

Famous Trails

Famous Trails ViewCatcher DCB 822 Manuel utilisateur

AGM

AGM EXPLORATOR FSB50-640 Manuel utilisateur

Opticron

Opticron Marine-3 7x50 BIF.GA Guide d'installation

Kayoba

Kayoba 009129 Manuel utilisateur

Vixen

Vixen ARENA Series Manuel utilisateur

MAGINON

MAGINON NVB 60 Manuel utilisateur

Leica

Leica Geovid 56 Manuel utilisateur

Leica

Leica GEOVID PRO Manuel utilisateur

Celestron

Celestron LandScout Manuel utilisateur

APM

APM ED Apo Series Manuel utilisateur