Atlas Copco LH 11 Manuel utilisateur
Overhauling instructions
Handheld hydraulic breakers
© 2008 Atlas Copco Construction Tools AB
|
No. 3392 5143 01
|
2008-02-29
11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
LH
3
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
© 2008 Atlas Copco Construction Tools AB
|
No. 3392 5143 01
|
2008-02-29
Contents
Contents
English ...................................................................4
4
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
© 2008 Atlas Copco Construction Tools AB
|
No. 3392 5143 01
|
2008-02-29
Contents
Contents
ABOUT THE OVERHAULING INSTRUCTIONS.....................................5
Repair - general information .................................................6
Torque settings............................................................6
SPECIAL TOOLS FOR REPAIR .................................................6
DISASSEMBLY ..............................................................7
Main components..........................................................7
Nose part................................................................10
Valve housing ............................................................11
Trigger valve .............................................................12
Accumulator .............................................................13
Cylinder .................................................................15
E-handle ................................................................16
ASSEMBLY ................................................................19
Valve housing LH 11-LH 19 E ...............................................19
Valve housing (new type) LH 22-LH 40 E ......................................22
Cylinder .................................................................24
Accumulator .............................................................25
Main components.........................................................27
Mounting of bushing in nose part ...........................................31
Mounting of latch in nose part ..............................................32
Adjustment of E-handle ....................................................34
ENGLISH
5
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
© 2008 Atlas Copco Construction Tools AB
|
No. 3392 5143 01
|
2008-02-29
Overhauling instructions
About the Overhauling instructions
The aim of the instructions is to provide you with knowledge of how to make basic
overhauling of the LH 11-40 handheld hydraulic breakers.
Only qualified and trained persons may operate or maintain the breakers. Use only
authorized parts. Any damage or malfunction caused by unauthorized parts will not
be covered by the Warranty or Product Liability.
For major service to the breakers, contact your nearest authorized Atlas Copco
workshop.
Safety instructions and technical
specifications
Please consult the "Spare parts list" and the "Safety and operating instructions" for
the LH 11-40 handheld hydraulic breakers regarding safety instructions, technical
specifications, trouble shooting etc.
6
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
© 2008 Atlas Copco Construction Tools AB
|
No. 3392 5143 01
|
2008-02-29
Overhauling instructions
Repair - general information
Before repairing the handheld hydraulic breakers,
read the following in order to avoid incorrect repair
and damage to the breaker.
Repair other than in accordance with the
instructions given may subject the breaker to
conditions beyond the design capability, which may
result in system failure.
Notice leakages and defects before disassembly
- if necessary, consult the Trouble shooting section
in the safety and operating instructions. Test the
breaker with test equipment - a defect is easier to
find, when you have a presumption.
Danger
The breaker has a pressure accumulator. This
accumulator is pressurized even when there is no
hydraulic pressure to the breaker.
Attempting to dismantle the accumulator without
first releasing the pressure can cause personal
injury or death. The nitrogen gas pressure (N2)
must be released before carrying out further
dismantling. This procedure must be carried out by
a qualified person.
Warning
Do not repair the breaker when connected to the
hydraulic power source.
Torque settings
Use only the torque settings specified in the spare
parts list.
Caution
All bolts used on Atlas Copco equipment are high
tensile and may not under any circumstances be
replaced by bolts of a lesser tensile specification.
Special tools for repair
Punches (scrapers)
ø14 mm: Part number 3371 8156 07
ø37 mm: Part number 3371 8156 06
ø44 mm: Part number 3371 8206 14
ø47 mm: Part number 3371 8206 20
Tool for accumulator
Part number 3371 8077 60
Filling device
Part number 3371 8011 55
This part number includes the above tool for
accumulator part number 3371 8077 60
7
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
© 2008 Atlas Copco Construction Tools AB
|
No. 3392 5143 01
|
2008-02-29
Overhauling instructions
Disassembly
Main components
1. Mount the breaker in a vice
2. Loosen the nose part (a torque wrench can
also be used)
3. Dismount the nose part
4. Remount the breaker in the vice
5. Hammer the nabs away from the screws
6. Loosen the four screws
8
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
© 2008 Atlas Copco Construction Tools AB
|
No. 3392 5143 01
|
2008-02-29
Overhauling instructions
7. Remove the screws
8. Remove the handle from the accumulator
9. Loosen the four screws on the accumulator
10. Remove the accumulator
11. Remove the trigger valve
12. Loosen the screws in the valve housing
9
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
© 2008 Atlas Copco Construction Tools AB
|
No. 3392 5143 01
|
2008-02-29
Overhauling instructions
13. Remove the valve housing from the
cylinder
14. Remove the striking piston from the
cylinder
10
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E
© 2008 Atlas Copco Construction Tools AB
|
No. 3392 5143 01
|
2008-02-29
Overhauling instructions
Nose part
1. Mount the nose part in a vice
2. Hammer out the two roll pins and remove
the latch
3. Remove the lock pin and the spring
4. Remove the locking ring
5. Remove the chisel bellows
Autres manuels pour LH 11
1
Ce manuel convient aux modèles suivants
8
Table des matières
Autres manuels Atlas Copco Outils électriques
Atlas Copco
Atlas Copco EP6PTI32 HR10-MT Instructions originales
Atlas Copco
Atlas Copco ETP ST32-10-10 Instructions originales
Atlas Copco
Atlas Copco ITB-A31-05-I06 Instructions originales
Atlas Copco
Atlas Copco S8020-WS Feuille d'instructions
Atlas Copco
Atlas Copco ETD-STR61-120-13-T25 Feuille d'instructions
Atlas Copco
Atlas Copco RTX-14 Manuel utilisateur
Atlas Copco
Atlas Copco ETD ST101-100-13 Instructions originales
Atlas Copco
Atlas Copco ETP TBP81-55-10 Feuille d'instructions
Atlas Copco
Atlas Copco TEX 09PS Guide de maintenance et de service
Atlas Copco
Atlas Copco ETV ST101-100-13-F Instructions originales
Atlas Copco
Atlas Copco PRO W2611 Manuel utilisateur
Atlas Copco
Atlas Copco TEX140PS Manuel utilisateur
Atlas Copco
Atlas Copco SB100 Caractéristiques techniques
Atlas Copco
Atlas Copco ETB Manuel utilisateur
Atlas Copco
Atlas Copco ETD STR61-70-13 Feuille d'instructions
Atlas Copco
Atlas Copco ETV ST101-270-20 Feuille d'instructions
Atlas Copco
Atlas Copco LMS08 SR42 Feuille d'instructions
Atlas Copco
Atlas Copco RTX-18 Manuel utilisateur
Atlas Copco
Atlas Copco ETD ST81-50-13-T25 Instructions originales
Atlas Copco
Atlas Copco RT-25 Manuel utilisateur
