Atim Cloud Wireless ACW/LW8-DIND160 Manuel utilisateur

ATIM Cloud Wireless®

Metering and Dry Contacts

DINDxxx

User Guide

Concerned models:

ACW/LW8-DIND160

ACW/SF8-DIND160

ACW/LW8-DIND80

ACW/SF8-DIND80

ACW/LW8-DIND88

ACW/SF8-DIND88

ACW/LW8-DIND44

ACW/SF8-DIND44

2 
ACW-DINDxxx_UG_EN_V1.10 
Table of content 
SOFTWARE VERSION...........................................................................................................................................................................4 
DOCUMENT VERSION HISTORY...........................................................................................................................................................4 
DISCLAIMER ........................................................................................................................................................................................5 
TRADEMARKS AND COPYRIGHT ..........................................................................................................................................................5 
DECLARATION OF COMPLIANCE .........................................................................................................................................................5 
ENVIRONMENTAL RECOMMENDATIONS ............................................................................................................................................5 
A.ENVIRONMENT ...................................................................................................................................................................................5 
B.RADIO ...............................................................................................................................................................................................6 
PRELUDE .............................................................................................................................................................................................7 
TECHNICAL FEATURES.........................................................................................................................................................................8 
A.PRODUCTS FEATURES...........................................................................................................................................................................8 
B.ELECTRICAL FEATURES..........................................................................................................................................................................9 
C.INPUTS AND METERS FEATURES.............................................................................................................................................................9 
TEMPERATURE SENSOR FEATURES .................................................................................................................................................................10 
METERS BACK-UP.......................................................................................................................................................................................10 
OUTPUTS CALENDAR...................................................................................................................................................................................10 
CASING..............................................................................................................................................................................................11 
A.SPACE REQUIREMENTS .......................................................................................................................................................................11 
B.IDENTIFICATION ................................................................................................................................................................................12 
SET UP...............................................................................................................................................................................................13 
A.ANTENNA POSITIONING......................................................................................................................................................................13 
B.MODEM CONNECTION .......................................................................................................................................................................13 
Antenna (SMA connector) ................................................................................................................................................................13 
Power Supply (Bottom terminal block) ............................................................................................................................................13 
Jack connector ..................................................................................................................................................................................13 
C.TERMINALS’DESCRIPTION...................................................................................................................................................................14 
D.PUSHBUTTON ...................................................................................................................................................................................15 
E.LEDS MEANING ................................................................................................................................................................................15 
Failure or success of an operation ...................................................................................................................................................15 
Radio activity.....................................................................................................................................................................................15 
Alarm.................................................................................................................................................................................................15 
Power cut ..........................................................................................................................................................................................15 
Non critic error..................................................................................................................................................................................15 
Critical error ......................................................................................................................................................................................15 
NORMAL BEHAVIOUR AT STARTUP...................................................................................................................................................16 
SETUP AND CONFIGURATION ...........................................................................................................................................................17 
A.SETUP .............................................................................................................................................................................................17 
Inputs setup.......................................................................................................................................................................................17 
Available event....................................................................................................................................................................................................17 
Pulling types (from version V1.2.0)....................................................................................................................................................................17 
Available trigger modes......................................................................................................................................................................................17 
Bounce time parameter....................................................................................................................................................................18 
Periodic frame parameter ................................................................................................................................................................18 
Keep alive frame parameters...........................................................................................................................................................18 
The available periods are as follows..................................................................................................................................................................18 
Temperature parameter (offset)......................................................................................................................................................18 

3 
ACW-DINDxxx_UG_EN_V1.10 
Pairing method setup .......................................................................................................................................................................19 
Setup of the shock alarm..................................................................................................................................................................19 
B.CONFIGURATION VIA USB ..................................................................................................................................................................19 
UPLINKS ON IOT NETWORKS (SIGFOX/LORAWAN) ...........................................................................................................................23 
A.TEST FRAME .....................................................................................................................................................................................23 
B.KEEP ALIVE FRAME.............................................................................................................................................................................23 
C.STATE FRAME ...................................................................................................................................................................................23 
Digital inputs frame..........................................................................................................................................................................24 
Frame of digital IN/OUT and temperature......................................................................................................................................24 
Digital IN/OUT frame, temperature, and Meter 1 ..........................................................................................................................24 
Frame of digital IN/OUT, Meter 1 and Meter 2 ..............................................................................................................................24 
Frame of digital IN/OUT and Meter 1..............................................................................................................................................25 
Meters 1 & 2 frame ..........................................................................................................................................................................25 
Meters 3 & 4 .....................................................................................................................................................................................25 
Meters 5 & 6 .....................................................................................................................................................................................25 
Meters 7 & 8 .....................................................................................................................................................................................25 
Frame of digital IN/OUT, temperature and Meters 1 to n (only LoRaWAN) .................................................................................26 
Frame of digital IN/OUT and Meters 1 to n (only LoRaWAN) ........................................................................................................26 
D.ALARM OF SHOCK FRAME ...................................................................................................................................................................26 
E.FORMAT/DECODING OF DATA/FRAMES.................................................................................................................................................27 
State of digital inputs (for DIND160 and DIND80) ..........................................................................................................................27 
State of digital inputs/outputs (for DIND88 and DIND44)..............................................................................................................27 
Metering............................................................................................................................................................................................27 
Temperature in 1/10 of °C..................................................................................................................................................................27 
Power supply tension (millivolt) .......................................................................................................................................................27 
Examples of frames ..........................................................................................................................................................................28 
F.FRAMES SUMMARY............................................................................................................................................................................29 
DOWNLINKS FROM IOT NETWORKS (SIGFOX OU LORAWAN)...........................................................................................................30 
A.PARAMETERS....................................................................................................................................................................................30 
Keep alive frame parameters (Code 03) ..........................................................................................................................................30 
Inputs parameters (Code 10 to 25)..................................................................................................................................................30 
Events - bits 0 to 4 ..............................................................................................................................................................................................31 
Pull types - bits 5 (from V1.2.0)..........................................................................................................................................................................31 
Trigger modes - bits 6 to 7 .................................................................................................................................................................................31 
Rebound time parameter (Code 30) ................................................................................................................................................32 
Parameter of the periodic frame (Code 31) ....................................................................................................................................32 
Settings on temperature - Offset (Code 32) ....................................................................................................................................32 
Output calendar configuration (code 34 to 40) ..............................................................................................................................33 
Shock alarm configuration (code 41)...............................................................................................................................................34 
B.COMMANDS.....................................................................................................................................................................................35 
Restart (Command 0x01) .................................................................................................................................................................36 
About (Command 0x02) ...................................................................................................................................................................36 
Reconfiguration with default settings (Command 0x03)................................................................................................................36 
Obtain the complete configuration (Command 0x04)....................................................................................................................37 
Obtain the version of the used protocol (Command 0x07) ............................................................................................................37 
Apply a value to the Meters (from version V1.2.0) (Command 0x0A) ...........................................................................................38 
Outputs monitoring ..........................................................................................................................................................................38 
Apply a state to outputs (Command 0x10) .......................................................................................................................................................38 
Obtain the state of outputs (Command 0x20)..................................................................................................................................................40 
Apply a state to outputs’ group (Command 0x11) ...........................................................................................................................................40 
Generate a positive pulse to an outputs group (Command 0x12) ..................................................................................................................41 
Generate a negative pulse to an outputs’ group (Command 0x13) ................................................................................................................42 
Enable/Disable Output calendar (0x0B) ............................................................................................................................................................43 
Get output calendar state (0x0C) ......................................................................................................................................................................43 

ACW-DINDxxx_UG_EN_V1.10

TECHNICAL SUPPORT ........................................................................................................................................................................44

Software version

Product reference

Product version

ACW/SF8-DIND160

B.1

ACW/SF8-DIND80

B.1

ACW/SF8-DIND88

B.1

ACW/SF8-DIND44

B.1

ACW/LW8-DIND160

B.1

ACW/LW8-DIND80

B.1

ACW/LW8-DIND88

B.1

ACW/LW8-DIND44

B.1

Document version history

Version

Date

Description

Author

0.9

10/06/2017

Document creation

1.0

26/06/2017

Corrections

1.1

27/09/2017

Complete Sigfox version

1.2

15/03/2018

SF8/LW8 versions in 8 and 16 inputs

Downlink commands addition

1.3

05/04/2018

Inputs decoding precisions

1.4

11/09/2019

Renaming

Outputs versions additions (DIND44 and DIND88)

Electrical features updates

1.5

07/10/2019

Corrections

1.6

21/02/2020

Clarification of the Downlink summary table

1.7

24/02/2020

Add new uplink frames (output status)

1.8

21/09/2020

Output calendar (downlink and command)

Configuration of shock alarm

Update of the configuration manual

1.9

08/10/2021

Modification of the Positive Pulse and Negative

pulse commands for versions ≥ v1.5.0

1.10

16/06/2022

Corrections

ACW-DINDxxx_UG_EN_V1.10

Disclaimer

The information contained in this document is subject to change without warning and does not represent a

commitment on the part of ATIM.

Trademarks and copyright

ATIM, ACW ATIM Cloud Wireless®and ARM Advanced Radio Modem®are registered trademarks of ATIM SARL in

France. The other trademarks mentioned in this document are the property of their respective owners.

Declaration of compliance

All ACW Atim Cloud Wireless®products comply with the regulatory requirements of the R&TTE Directive

(1999/5/EC), article 3:

1 SAFETY (Article 3.1a of the 1999/5/EC Directive)

NF EN60950-1 Ed. 2006/A1:2010/A11:2009/A12:2011 (health)

EN62479: 2010 (power <20mW) or EN62311:2008 (power > 20mW)

2 Electromagnetic Compatibility (Article 3.1b of the 1999/5/EC Directive)

EN 301489-3 v1.4.1, EN 301489-1 V1.9.2

3 Efficient use of the radio frequency spectrum (Art.3.2 of the 1999/5/EC Directive)

ETSI EN300 220-2 v2.4.1 and EN300 220-1 v2.4.1

Environmental recommendations

a. Environment

Respect the temperature ranges for storage and operation of all products. Failing to respect these guidelines could

disrupt device operation or damage the equipment.

Follow the instructions and warnings provided below to ensure your own safety and that of the environment and to

protect your device from any potential damage.

ACW-DINDxxx_UG_EN_V1.10

Waste disposal by users in private households within the European Union. This symbol appears on a product or

its packaging to indicate that the product may not be discarded with other household waste. Rather, it is your

responsibility to dispose of this product by bringing it to a designated collection point for the recycling of

electrical and electronic devices. Collection and recycling waste separately at the time you dispose of it helps

to conserve natural resources and ensure a recycling process that respects human health and the environment.

For more information on the recycling center closest to your home, contact your closest local government office,

your local waste management service or the business from which you purchased the product.

b. Radio

Modems in the ACW line are radio-communication modems that use the ISM (industrial, scientific and medical) bands,

which may be used freely (at no cost and with no authorization required) for industrial, scientific and medical

applications.

General hazard –Failure to follow the instructions presents a risk of equipment damage.

Electrical hazard –Failure to follow the instructions presents a risk of electrocution and physical injury.

WARNING: do not install this equipment near any source of heat or any source of humidity.

WARNING: for your safety, it is essential that this equipment be switched off and disconnected from mains

power before carrying out any technical operation on it.

WARNING: the safe operation of this product is ensured only when it is operated in accordance with its intended

use. Maintenance may only be performed by qualified personnel.

ACW-DINDxxx_UG_EN_V1.10

Prelude

This guide describes the features of the ACW-DINDxxx product. It describes the characteristics of the product, explains

its commissioning, its configuration, and its operation.

The ACW-DINDxxx is intended to raise the digital input states (Dry contacts) on an IoT network such as Sigfox or

LoRaWAN. These inputs are configurable and can be enabled / disabled as single inputs or as Meter inputs. Versions

with dry contact outputs are also available, allowing the remote control of various equipment.

A temperature sensor can be optionally connected. The product also has a shock sensor for issuing an alert in case of

tearing of the limp.

ACW-DINDxxx_UG_EN_V1.10

Technical features

a. Products features

Dimensions

53 x 67 x 95 mm

Antenna

External via SMA connector

Temperature

-20°C to +55°C (operation)

-40°C to +70°C (storage)

Mounts to

DIN rail

Power supply

1x power supply, 10-30 V DC

Consumption

100 mA

Dry contacts Digital inputs

(DIND60)

-16 configurable inputs

-Change of state alerting

-8 configurable meters on whatever input (4 meters

before version V1.2.0)

-Available configuration of 4 group of inputs

Dry contacts Digital inputs

(DIND80 and DIN88)

-8 configurable inputs

-Change of state alerting

-8 configurable meters on whatever input

-Available activation of a group of inputs

Dry contacts Digital inputs

(DIND44)

-4 configurable inputs

-Change of state alerting

-4 meters configurable on whatever input

-Available activation of a group of inputs

Dry contacts Digital outputs

-DIND88: 8 outputs driven via downlink

-DIND44: 4 outputs driven via downlink

Configuration via

USB Port or Downlink

Alarm

Wrenching / Shock

Frequency

865 –870 MHz

Power

25 mW (14 dBm)

Transfer rate

Sigfox: 100 bps

LoRaWAN: 300 bit/s to 10 kbit/s

LoRaWAN

Class C

ACW-DINDxxx_UG_EN_V1.10

b. Electrical features

Min.

Type

Max.

Power supply (V)

10V

30V

Emission consumption (mA)

Condition:

-12V Power supply

-Every output is shut down

60mA –Sigfox 60mA –

LoRaWAN

Condition:

- 24V Power supply

-Every output is shut down

35 mA –Sigfox 30mA –

LoRaWAN

Reception consumption (mA)

Condition:

-12V Power supply

-Every output is shut down

50mA –Sigfox 30mA –

LoRaWAN

Condition:

- 24V Power supply

-Every output is shut down

30mA –Sigfox 20mA –

LoRaWAN

Standby consumption (mA)

Condition:

-12V Power supply

-Every output is shut down

20 mA –Sigfox N/A –

LoRaWAN

Condition:

- 24V Power supply

-Every output is shut down

15 mA –Sigfox N/A –

LoRaWAN

Input high level voltage (V)

2.8V

with Pull-Down

30V (recommended)

2.3V

with Pull-Up

Input low level voltage (V)

with Pull-Down

1.3V

with Pull-Up

0.15V

Tension of outputs (V)

10V

Power supply tension

30V

Current of outputs (mA)

250 mA

c. Inputs and Meters features

Min.

Type

Max.

Inputs or meters frequency (Hz)

Condition:

- Cyclic report at 50%

- Filtering time 1 ms

400Hz

Bounces filtering time

1ms

Note: Configurable value.

255ms

Bounces filtering time precision

-1ms

Note: to guarantee a minimum 1ms of

filtering time, the filtering time must

be configured to 2ms.

0ms

Meters size

4 bytes

ACW-DINDxxx_UG_EN_V1.10

Temperature sensor features

Optionally, a temperature sensor can be connected to the ACW-DINDxxx. The following ranges refer to the sensor

used. Be careful, the product has a smaller operating range than the sensor (see above).

Temperature

Range

-55°C to +125 °C

Resolution

0,1°C

Precision between -40°C and +80°C

+/- 0.5°C

Precision between -55°C and +125°C

+/- 2°C

Meters back-up

Since version V1.2.0 the Meters are saved in the memory of the ACW during several events:

•When writing Meters via the USB configurator

•When writing via a downlink command

•During a power failure

Outputs calendar

From 1.4.0 firmware version, it is possible to program outputs state depending on weekday and a time window.

The possible configurable parameters are:

-The start time (1 minute increment)

-The stop time (1 minute increment)

-The weekdays when the program is effective

-Outputs to set

-Outputs to reset

You can configure from 1 to seven programs and several programs can be used the same day.

Once a program is configured, it is automatically enabled but a command is provided to disable it later (several

programs can be disabled at once). It will remain disabled while the same command is sent once again.

In addition, this command can disable the program(s) for the next day only. The program(s) will be automatically

enabled the day after.

Once a program’s time slot is done, the outputs affected by the program will be driven at the opposite state (ex: an

output to “1” during the program will be at “0” at the end).

WARNING

It is not a good practice to configure several programs at the same time if these ones drive the same outputs.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Atim Cloud Wireless Matériel réseau

Atim Cloud Wireless

Atim Cloud Wireless AGT/INDUS2 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur