ATEQ F670 Manuel utilisateur

ATEQ F670

Quick Start Guide

QSG_F670_363.00_EN_01_2021-02-09

2/42

Table of contents

Safety advisory / Warranty

Good practices and safety instructions 4

Air quality requirements 5

Preamble

ATEQ F670, an universal leak tester 6

Leak test 7

Principe of a cycle 8

Your ATEQ F670

Front panel 9

Connectors on the back panel (with all options) 10

Power supply connectors 12

Digital links 12

Analog outputs 15

Digital inputs/outputs 16

Pneumatic connectors 19

Pneumatics configuration 22

User interface

Overview 30

Keys 30

Display 31

Starting up

Power up 33

Preparing a program 33

Modifying a parameter 34

Selecting a program or a sequence 35

Starting and stopping current cycle 35

User adjustments

Options of the menus 36

Specifications

Characteristics 42

QSG_F670_363.00_EN_01_2021-02-09

3/42

ATEQ - Measurement Solution, Global Leader.

ATEQ

15, rue des Dames, Z.I.

78340 LES CLAYES-SOUS-BOIS

FRANCE

[email protected]

ateq.com

T.: +33 1 30 80 1020

F.: +33 1 30 54 1100

ATEQ K.K.

3 –41 ATEQ Building, Ikehata

Chiryu-city, Aichi-pref

JAPAN

[email protected]

ateq.co.jp

T.: +81 566-84-4670

F.: +81 566-84-4680

ATEQ China

98 Jian Peng Lu

Shanghai

CHINA

[email protected]n

ateq.com.cn

T.: +86 21 6763 9508

F.: +86 21 6763 9528

ATEQ SYSTEMS ANALYSIS TAIWAN CO.,

LTD.

NO. 3, LAN 223, San Jia Dong Street

40642, TAICHUNG

TAIWAN

[email protected].tw

ateq.com.tw

T.: +886 4 2437 5278

F.: +886 4 2437 3675

ATEQ CORP.

35980 Industrial Road Suite L

Livonia MI 48150

UNITED STATES

[email protected]

atequsa.com

T.: +1 734-838-3100

F.: +1 734-838-0644

We continuously work on improving our products. This is why information contained in this

manual, the device and the technical specifications may be modified without prior notification.

Pictures and figures in this manual are non-contractual.

QSG_F670_363.00_EN_01_2021-02-09

4/42

Safety advisory / Warranty

GOOD PRACTICES AND SAFETY INSTRUCTIONS

Safety recommendations

If the device is supplied with 100 / 240 V AC, it is mandatory to connect it to the ground with

a good link to the ground, to protect against electric hazard or electrocution.

It is dangerous to change the status of the outputs.

They can control power actuators or other equipment (mechanical, pneumatic, hydraulic,

electrical or other) which can cause serious personal injury and damage to surrounding

material.

For safety and quality measurement reasons, it is important, before powering on the device,

to ensure that it is air supplied with a minimum operating pressure (0.6 MPa ± 15%).

Recommendations for the test environment

Keep the test area as clean as possible.

Recommendations for operators

ATEQ recommends that the operators who use the devices have training and a level of

qualification that correspond to the job to perform.

General recommendations

—Read the user manual before using the device.

—All electrical connections to the device must be equipped with safety systems (fuses,

circuit breakers, etc.) adapted to the needs and in accordance with the applicable

standards and rules.

—To avoid electromagnetic interference, electrical connections to the device must be

shorter than 2 meters.

—Power supply plug must be grounded.

—Disconnect the device from the mains before performing any maintenance work.

—Shut off the compressed air supply when working on the pneumatic assembly.

—Do not open a connected device.

—Avoid splashing water on the device.

ATEQ is at your disposal for any information concerning the use of the device under

maximum safety conditions.

We draw your attention to the fact that ATEQ cannot be held responsible for any accident

related to a misuse of the measuring instrument, the workstation or non-compliance of the

installation with safety rules.

In addition, ATEQ declines any responsibility for the calibration or the fitting of their

instruments that is not done by ATEQ.

ATEQ also declines any responsibility for any modification (program, mechanical or

electrical) of the device done without their written consent.

QSG_F670_363.00_EN_01_2021-02-09

5/42

AIR QUALITY REQUIREMENTS

The air supplied into the device must be clean and dry. Even though the device is provided

with a filter, the presence of dust, oil or impurities may cause malfunction.

Air quality requirements according to ISO standard 8573

The air must be clean and dry.

The presence of impurities, oil or humidity in the air may cause deterioration which will not

be covered by the warranty.

When the instrument is working in vacuum conditions, impurities must be prevented from

being drawn into its internal components.

For this purpose, we strongly recommend that a suitable airtight filter is installed between

the part under test and the instrument.

ATEQ recommends the following characteristics for the air supplied into the device.

Recommended additional equipment

ATEQ recommends the installation of this additional equipment:

—Air dryer to provide dry air at less than - 40°C dew point

—25 microns and 1/100 microns double filter

Air characteristics

ISO standard 8573 class

Grain size and concentration

0.1 μm and 0.1 mg/m3

Class 1

Dew point under pressure

- 40°C dew

Class 2

Maximum concentration of oil

0.01 mg/m3

Class 1

QSG_F670_363.00_EN_01_2021-02-09

6/42

Preamble

ATEQ F670, AN UNIVERSAL LEAK TESTER

ATEQ F670 is a leak detector that tests the airtightness of parts.

ATEQ F670 can memorise 128 different test programs.

QSG_F670_363.00_EN_01_2021-02-09

7/42

LEAK TEST

Direct measurement principle

The part under test

and the reference part

are filled to an identical pressure. A

differential sensor

measures the pressure variation between the part under test

and the reference part

. In some applications, the reference part can be replaced by

a cap.

1 Device

2 Pressure sensor

3 Part under test

4 Differential pressure sensor

5 Reference part

Desensitized test

This mode is used for the measurement of large leaks, when the reject level required is

above the full scale of the differential sensor.

The test pressure is applied to the input of the part under test 3. The measurement is

performed by the pressure sensor 2.

1 Device

2 Pressure sensor

3 Part under test

4 Cap on the reference connector

Other type of tests are available in option (Burst test, Volume, Operator …).

QSG_F670_363.00_EN_01_2021-02-09

8/42

PRINCIPLE OF A CYCLE

The measurement cycle is made of 4 main phases: fill, stabilization, test, dumping.

A Pressure auto zero additional phase 0can be placed at the start or at the end of a cycle,

depending on the requirement of the operator.

0 Waiting phase

1 Fill phase

2 Stabilization phase

3 Test

4 Dumping

QSG_F670_363.00_EN_01_2021-02-09

9/42

Your ATEQ F670

FRONT PANEL

The user interface is located on the front panel.

1 Device name

2 Serial number

3 Display

4 Parameters lock key (option)

5 RS232 connector (option)

6 Mechanical regulator (option)

7 Cycle keys

8 Navigation keys

9 USB connectors

10 Mechanical regulator (option)

11 Quick connector (option)

For more information, refer to User interface.

QSG_F670_363.00_EN_01_2021-02-09

10/42

CONNECTORS ON THE BACK PANEL (WITH ALL OPTIONS)

Autres manuels pour F670

Table des matières

Autres manuels ATEQ Équipement de test

ATEQ

ATEQ D520 Manuel utilisateur

ATEQ

ATEQ VT TRUCK Manuel utilisateur

ATEQ

ATEQ Hydra Silver Manuel du propriétaire

ATEQ

ATEQ PRIMUS F Series Manuel utilisateur

ATEQ

ATEQ CDP60 Manuel utilisateur

ATEQ

ATEQ F5800 Manuel d'instructions

ATEQ

ATEQ F600 Manuel utilisateur

ATEQ

ATEQ VT66MB Manuel utilisateur

ATEQ

ATEQ D6 Series Manuel utilisateur

ATEQ

ATEQ VT Manuel utilisateur

ATEQ

ATEQ VT TRUCK 2.0 Manuel utilisateur

ATEQ

ATEQ CDF60 Manuel utilisateur

ATEQ

ATEQ BH SENS DT41 Manuel utilisateur

ATEQ

ATEQ F5200 Manuel d'instructions

ATEQ

ATEQ TPMS Manuel utilisateur

ATEQ

ATEQ Hydra Manuel du propriétaire

ATEQ

ATEQ F6 Profinet Series Manuel utilisateur

ATEQ

ATEQ F610 Manuel d'instructions

ATEQ

ATEQ F600HP Manuel utilisateur

ATEQ

ATEQ F670 Manuel utilisateur

ATEQ

ATEQ H6000 Manuel utilisateur

ATEQ

ATEQ WU47 Manuel utilisateur

ATEQ

ATEQ VT47 Manuel utilisateur

ATEQ

ATEQ ERD620 Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur