ATEN CS-1262 Manuel utilisateur

CS-1262

USER MANUAL

Two-Port DVI KVM Switch

cs-1262_2007-08-27.fm Page 1 Wednesday, September 19, 2007 2:33 PM

FCC Information

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy, and if not

installed and used in accordance with the instruction manual, may

cause interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from

that which the receiver is connected;

Consult the dealer or an experienced radio/television technician

for help.

RoHS

This product is RoHS compliant.

SJ/T 11364-2006

The following contains information that relates to China.

cs-1262_2007-08-27.fm Page 2 Wednesday, September 19, 2007 2:33 PM

- 3 -

CS-1262 User Manual

Online Registration

You can register your product at our online support center:

International – http://support.aten.com

North America – http://www.aten-usa.com/

product_registration

Online Support

Online technical support is available to ATEN customers

through our support center:

International – http://support.aten.com

North America – http://www.aten-usa.com/support.

Troubleshooting, Documentation (including online manuals),

and Software Updates (firmware and drivers) are available at

the ATEN website:

International – http://www.aten.com

North America – http://www.aten-usa.com

cs-1262_2007-08-27.fm Page 3 Wednesday, September 19, 2007 2:33 PM

- 4 -

Package Contents

The CS-1262 package contains the following items:

1 CS-1262 Two Port DVI + Audio KVM Switch

2 Custom KVM Cables

1 Power Adapter (DC 5.3V; 2.4A)

1 User Manual*

1 Quick Start Guide

Check to make sure that all the components are present and that

nothing got damaged in shipping. If you encounter a problem,

contact your dealer.

Read this manual thoroughly and follow the installation and

operation procedures carefully to preventanydamage tothe unit,

and/or any of the devices connected to it.

*Features may have been added to the CS-1262 since this

manual was printed. Please visit our website to download the

most up-to-date version of the manual.

Manual Part No. PAPE-1259-200G

Printing Date: 09/2007

ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights

reserved. All other trademarks are the property of their respective owners.

cs-1262_2007-08-27.fm Page 4 Wednesday, September 19, 2007 2:33 PM

- 5 -

Overview

The Master View CS-1262 improves on previous KVM Switch

designs by incorporating DVI video and audio. Now, two

computers can be accessed and controlled from a single PS/2

keyboard, DVI monitor, and PS/2 mouse console.

DVI (Digital Visual Interface) supports both digital video input (flat

panel displays, data projectors, plasma displays, digital TVs and

set-top boxes) and analog video input (traditional monitors and

TVs).

The CS-1262 is audio enabled. A single microphone can provide

audio input to each of the computers, and you can listen to the

audio output of each computer on a single set of speakers (on a

one-at-a-time basis). With the CS-1262's independent

(asynchronous) switching feature, you can even have the KVM

focus on one computer while the audio focus is on the other.

Setup is fast and easy; simply plug the cables into their

appropriate ports. There are no installation routines, and no

software to configure.

There are two convenient methods to switch the KVM/Audio

focus between the computers: manually, with the port selection

pushbuttons located on the unit's front panel; and with hotkey

combinations entered from the keyboard.

Thereis nobetterway tosave time andmoneythan witha Master

View CS-1262 installation. Since a single console manages all of

the computers, the CS-1262 setup: eliminates the expense of

having to purchase separate console components for each

computer; saves all the space those extra components would

take up; saves on energy costs; and eliminates the

inconvenience and wasted effort involved in constantly moving

from one computer to another.

cs-1262_2007-08-27.fm Page 5 Wednesday, September 19, 2007 2:33 PM

- 6 -

Features

One console controls two computers

DVI digital and analog monitor support – fully compliant with

the DVI specification

Audio enabled

Easy to install – no software required – connecting cables to

the computers is all it takes

Easy to operate – manual and hotkey computer selection -

Auto Scan function to monitor computer operation

The KVM and audio focus can be switched together or

separately (asynchronous switching)

LED display for easy status monitoring

Hot-pluggable – add or remove computers for maintenance

without powering down the switch

Keyboard and mouse emulation for error free computer

booting

Superior video quality – up to 1920 x 1200; DDC2B

Compatible with all PC compatible operating platforms

cs-1262_2007-08-27.fm Page 6 Wednesday, September 19, 2007 2:33 PM

- 7 -

Requirements

Console

A DVI monitor

A PS/2 mouse

A PS/2 keyboard

Computers

Thefollowingequipmentmustbeinstalled oneach computer that

is to be connected to the system:

A DVI video port

A 6-pin mini-DIN (PS/2 style) mouse port

A 6-pin mini-DIN (PS/2 style) keyboard port

Cables

OnlyCSCustomcable setsspecificallydesigned towork withthis

switch may be used to link to the computers. For optimum signal

integrity and to simplify the layout, two high quality cable sets are

provided with this package.

Note: Therearethree typesofDVIsignals(DVI-I,DVI-A,DVI-D).

The cable type must match the type of signal being used

by the DVI source and the DVI display.

cs-1262_2007-08-27.fm Page 7 Wednesday, September 19, 2007 2:33 PM

- 8 -

Components

Front Panel

No. Component Description

1 PortSelection

Pushbuttons Press a pushbutton to bring the KVM and

Audio focus to the computer attached to its

respective port.

2 Port LEDs The Port LEDs are built into the Port Selection

Pushbuttons. The upper ones are the On Line

LEDs; the lower ones are the Selected Port

LEDs:

An On Line LEDs lights ORANGE to

indicate that the computer attached to the

corresponding port is up and running.

A Selected LED lights GREEN to indicate

that the computer attached to its

corresponding port is the one that has the

KVM focus.

1&2

cs-1262_2007-08-27.fm Page 8 Wednesday, September 19, 2007 2:33 PM

- 9 -

Rear Panel

No. Component Description

1 Console Port

Section The cables from your keyboard, monitor,

mouse, microphone, and speakers plug in

here. Each port is color coded and marked

with an appropriate icon.

2 KVM Port

Section The cables that link the switch to your

computers plug inhere. Each KVM Port

section is comprised of a keyboard, DVI video,

mouse, microphone, and speaker port. Each

port is color coded and marked with an

appropriate icon.

3 Power Jack The power adapter cable plugs in here.

1 2

cs-1262_2007-08-27.fm Page 9 Wednesday, September 19, 2007 2:33 PM

- 10 -

Installation

Cable Connection

To set up your installation, refer to the installation diagram on the

following page (the numbers in the diagrams correspond to the

steps, below), and do the following:

1. Plug your keyboard, DVI monitor, mouse, microphone, and

speakers into the Console Ports located on the unit’s rear

panel.

2. Using a KVM cable set (provided with this package), plug the

DVI connector into any available DVI socket in the KVM Port

section of the switch, and plug the accompanying keyboard,

mouse, microphone and speaker connectors into their

corresponding sockets.

Note: 1. Use the end of the cable that has the shorter connector

leads – the end with the longer leads is for plugging into

the computer.

2. Be sure that all the plugs are in the same KVM Port

sockets (all in Port 1, all in Port 2, etc.).

3. The KVM Port sockets and cable plugs are color coded

and marked with an appropriate icon for easy

installation.

3. At the other end of the cable, plug the keyboard, DVI monitor,

mouse, microphone, and speaker connectors into their

respective ports on the computer.

1. Make sure that the power to all the devices you will

be installing has been turned off. You must unplug

the power cords of any computers that have the

Keyboard Power On function.

2. Make sure that all devices you will be installing are

properly grounded.

cs-1262_2007-08-27.fm Page 10 Wednesday, September 19, 2007 2:33 PM

Autres manuels pour CS-1262

Table des matières

Autres manuels ATEN Changer

ATEN

ATEN CL-1758L Manuel utilisateur

ATEN

ATEN ALTUSEN KH2508a Manuel utilisateur

ATEN

ATEN VS0801HB Manuel utilisateur

ATEN

ATEN VS-201 Manuel utilisateur

ATEN

ATEN CS1182DP4C Manuel utilisateur

ATEN

ATEN Altusen KN1108V Manuel utilisateur

ATEN

ATEN Master View CS-1774 Manuel utilisateur

ATEN

ATEN KN1000A Manuel utilisateur

ATEN

ATEN Slideaway CL5708 Manuel utilisateur

ATEN

ATEN ACS-1722 Manuel utilisateur

ATEN

ATEN ALTUSEN KM0432 Manuel utilisateur

ATEN

ATEN CL5816N Manuel utilisateur

ATEN

ATEN VS482 Manuel utilisateur

ATEN

ATEN CS1953 Manuel utilisateur

ATEN

ATEN CS682-AT Manuel utilisateur

ATEN

ATEN CN9600 Manuel utilisateur

ATEN

ATEN Master View CS-1754 Manuel utilisateur

ATEN

ATEN US3312 Manuel utilisateur

ATEN

ATEN Slideaway CL5708 Manuel utilisateur

ATEN

ATEN Master View CS-82A Manuel utilisateur

ATEN

ATEN ALTUSEN KW1000 Manuel utilisateur

ATEN

ATEN Petite CS62U Manuel utilisateur

ATEN

ATEN CS724KM Manuel utilisateur

ATEN

ATEN CL6708MW Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur