ATCOM AX4D Manuel utilisateur

AX4D+EC128

ATCOM®Digital Card AX4D/AXE4D

Product Guide

25/06/2011

Written by Robert.Ao

www.atcom.cn 1

Content

CONTACT ATCOM ...............................................................................................................................2

CHAPTER 1 THE INTRODUCTION OF AX4D .......................................................................................... 3

CHAPTER 2 HARDWARE INTRODUCTION ............................................................................................ 5

CHAPTER 3 SOFTWARE INSTALLATION................................................................................................ 9

CHAPTER 4 SOFTWARE CONFIGURATION ......................................................................................... 11

CHAPTER 5 LOOPBACK TEST ............................................................................................................. 14

CHAPTER 6 REFERENCE .................................................................................................................... 19

www.atcom.cn 2

Contact ATCOM

The Introduction of ATCOM

Founded in 1998, ATCOM technology has been always endeavoring in the R&D and

manufacturing of the internet communication terminals. The product line of ATCOM includes IP

Phone, USB Phone, IP PBX, VoIP gateway and Asterisk Card.

Contact sales:

Address

District C, east of 2nd floor, #3, Crown industry buildings, Chegongmiao

Industry area, Futian district, Shenzhen, China

Tel

+(86)755-23487618

Fax

+(86)755-23485319

E-mail

sales@atcomemail.com

Contact Technical Support:

Tel

+(86)755-23481119

E-mail

Support@atcomemail.com

Website address: http://www.atcom.cn/

ATCOM Wiki Website:http://www.openippbx.org/index.php?title=Main_Page

Download Center: http://www.atcom.cn/download.html

www.atcom.cn 3

Chapter 1 the Introduction of AX4D

Overview of theAX4D

AX4D Asterisk card is the telephony PCI card which supports four ISDN PRI E1/T1/J1 ports,

optional with teleco-grade hardware echo cancellation. Using AX4D digital PRI card, open source

Asterisk PBX and stand alone PC, users can create their IP PBX telephony solution include all the

sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX.

Features

AX4D: Four ISDN PRI E1/T1/J1 ports

Support original Dahdi, Zaptel(No patch)

SupportAsterisk, Freeswitch, Yate

Support Elastix, Trixbox,AsteriskNOW, PBX in a Flash

100% compatible with all features of Asterisk PBX

32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host

processor intervention

Supports standard telephony and data protocols(Including PRI, CAS, CCS for voice and PPP,

HDLC, Cisco HDLC and Frame Relay for data modes)

Supports chan_ss7 and Openr2

Optional hardware echo cancellation

Select the hardware echo cancellation direction

Applications

ISDN PRI IP PBX

ISDN least cost router

Calling Card Platforms

IVR system

Call Center

Traditional Calls/VoIP Calls Conference

VoIP Gateway

Callback Service

Optional DSP Hardware Echo Cancellation Module

G.168–2002 echo cancellation in hardware

1024 taps/128 ms tail per channel on all channel densities

DTMF decoding and tone recognition

Voice quality enhancement: music protection, acoustic echo control, and adaptive noise reduction

Does not increase the physical size of the card, and no additional slot is required

www.atcom.cn 4

Voice Modes

Pri CPE and PRI NET:

EuroISDN

4ESS(AT&T)

5ESS(Lucent)

DMS100

Hardware Requirement

1.6-Ghz Pentium IV

512 MB RAM

3.3V or 5V PCI 2.2 slot

PCI Card Dimension

131.5mm (Length)*94mm (height)

Operating System

Linux (all versions, releases and distributions from 1.0 up)

www.atcom.cn 5

Chapter 2 Hardware Introduction

AX4D

The Front and Rear View of EC128

LED Red: If the driver of the card is loaded correctly and the /etc/dahdi/system.conf file is

configured correctly, the LED Red of the four ports will be red clearly.

LED Green: If the PRI line is connected correctly, and it synchronizes to the other end

successfully, then the LED Green will be green clearly.

If the PRI line is connected correctly, and it is synchronizing to the other end, then both of the

LED Green and LED Red will be on clearly.

www.atcom.cn 6

SW1: It is used for selecting E1, T1, J1 mode, by default ATCOM will set it up according to your

requirement before shipping out. Customer can set up E1, T1/J1 like the following:

For E1 Mode For T1 and J1 Mode

SW2: It is used when you have more than one PRI card in your server, if you have two cards in

your server, then turn it to 0 in one card, and turn it to 1 in the other card; if you have four cards in

your server, then turn it to 0,1,2,3 respectively.

SW3: It is used to select the hardware echo cancelation direction, by default we set it up to delete

the echo for local side, if customers want to delete the echo for the far end side, please turn the

buttons to on state.

Delete the echo for local side Delete the echo for the far end side

www.atcom.cn 7

J17, J18: They are used to connect to other cards, when you have several cards in your server.

Using clock line to connect each other, all of the cards work in one server can synchronize

accurately. If customer have PRI card and analog card in one server, the analog card can

synchronize accurately with telecom in this way, and it is useful for fax.

J18 and J17

JP5: It is used for selecting the PCI power feeding for the card, by default we choose the 3.3v for

the card, customer do not need to reset the jumper; the card can also choose 5.0v for power feedin

g in the case that the 3.3v in the motherboard of PC is not enough for the card, but this

phenomenon happens rarely.

For Choosing 3.3v Power For Choosing 5.0v Power

www.atcom.cn 8

JP4: It is used for selecting the power feeding for the hardware echo cancellation module, by

default we choose the 3.3v; the module can also choose 5.0v for power feeding in the case that the

3.3v in the motherboard of PC is not enough for the module, but this phenomenon happens rarely.

For the latest version, the module does not need this jumper.

For Selecting 3.3v Power

For Selecting 5.0v Power

www.atcom.cn 9

Chapter 3 Software Installation

Test Environment:

libpri-1.4.10.2

dahdi-linux-2.3.0.1

dahdi-tools-2.3.0

asterisk-1.6.2.6

centos 5.4 (kernel version: 2.6.18-164.el5)

After inserting the card into your PCI slot and boot your server, please use the “lspci”command to

check the PCI bus compatibility. From the correct output, you can see the following line:

----------------------------------------------------------------------------------------------------------------------

03:01.0 Communication controller: Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V

(rev 02)

----------------------------------------------------------------------------------------------------------------------

The TE410P will be found, if you can not see one line like the line above, please poweroff your

server and try to use another PCI slot, if it still does not help, you have to check the compatibility

issue between the card and your PCI bus.

1. To install asterisk and dahdi, we have to use “yum”command to install the following

prerequisite packages:

bison bison-devel zlib zlib-devel openssl openssl-devel gnutls-devel gcc gcc-c++

2. Download libpri, dahdi-linux, dahdi-tools, and asterisk

[root@localhost src]#

wget http://downloads.asterisk.org/pub/telephony/libpri/releases/libpri-1.4.10.2.tar.gz

[root@localhost src]#

Wget

http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases/dahdi-linux-2.3.0.1.tar.gz

[root@localhost src]#

wget

http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases/dahdi-tools-2.3.0.tar.gz

[root@localhost src]#

wget http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-1.6.2.6.tar.gz

3. Install libpri

1) [root@localhost src]# tar -xvzf libpri-1.4.10.2.tar.gz

2) [root@localhost libpri-1.4.10.2]# make

3) [root@localhost libpri-1.4.10.2]# make install

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ATCOM Carte PCI

ATCOM

ATCOM AX-400P Manuel utilisateur

ATCOM

ATCOM AX-1600P Manuel utilisateur

ATCOM

ATCOM AX-1E Manuel utilisateur

ATCOM

ATCOM AX-1600P Manuel utilisateur

ATCOM

ATCOM AX-1600P Manuel utilisateur

ATCOM

ATCOM AX-1600P Manuel utilisateur

ATCOM

ATCOM AX4B Manuel utilisateur

ATCOM

ATCOM AX1D Manuel utilisateur

ATCOM

ATCOM AXE4DL Manuel utilisateur

ATCOM

ATCOM EC64 Manuel utilisateur

ATCOM

ATCOM AX1D Manuel utilisateur

ATCOM

ATCOM AX2D Manuel utilisateur

ATCOM

ATCOM AX-400P Manuel utilisateur

ATCOM

ATCOM AX-1E Manuel utilisateur

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur