Asus PW191 Series Manuel utilisateur
English
PW191
LCD Monitor
Quick Start Guide
22
22
2Quick Start GuideQuick Start Guide
Quick Start GuideQuick Start Guide
Quick Start Guide
English
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supplied
to your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
• If you encounter technical problems with the monitor, contact a qualified
service technician or your retailer.
Monitor introduction
Front viewFront view
Front viewFront view
Front view Rear viewRear view
Rear viewRear view
Rear view
1. MENU sensor
2. Decrease sensor/Volume hotkey
3. Increase sensor/Brightness hotkey
4. SPLENDID™ mode hotkey
5. Power sensor/indicator
11
11
1
22
22
2
44
44
4
33
33
3
33
33
344
44
455
55
5
11
11
122
22
21010
1010
10
99
99
9
88
88
8
77
77
7
Stand
Stereo
speaker
6. DC-in port
7. DVI port
8. VGA port
9. Audio-in port
10. Headphone port
66
66
6
33
33
3
Quick Start GuideQuick Start Guide
Quick Start GuideQuick Start Guide
Quick Start Guide
English
Stand
The monitor is folded in the
package. To unfold the
monitor, hold the stand
with one hand and carefully
tilt the monitor forward
with the other hand.
Unfolding the monitor
To connect the cables:
1. Adjust the monitor
to your desired
height and tilt.
2. Turn the monitor
90º counterclockwise
so you can clearly see
the ports at the
bottom of the rear
panel.
Connecting the cables
Front view Side view
3. Connect the cables as shown:
Power adapter
VGA cable
Audio cable
Input ports
44
44
4Quick Start GuideQuick Start Guide
Quick Start GuideQuick Start Guide
Quick Start Guide
English
4. Close the rear connector cover.
Align the cover to the three slots
near the ports and close the cover
carefully. A click indicates that the
cover has been closed successfully.
•To connect the audio cable:To connect the audio cable:
To connect the audio cable:To connect the audio cable:
To connect the audio cable: connect one end of the audio cable to
the monitor’s Audio-in port, and then connect the other end to the
computer multi-media (or audio) card’s audio output.
•To connect the power adapter:To connect the power adapter:
To connect the power adapter:To connect the power adapter:
To connect the power adapter: first, connect the adapter cord
securely to the monitor’s DC-in port. Then, connect the power plug to
the adapter port with the other end to a power outlet.
•To connect the VGA cable:To connect the VGA cable:
To connect the VGA cable:To connect the VGA cable:
To connect the VGA cable:
a. Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port.
b. Connect the other end of the VGA/DVI cable to your computer’s
VGA/DVI port.
c. Tighten the two screws to secure the VGA/DVI connector.
Adjusting the monitor
-5º~25º
120º
90º
• You can adjust the monitor’s
from -5º to 25º.
• You can also turn the monitor
90º counterclockwise.
• The stand allows you to turn the
monitor left/right up to 120º.
55
55
5
Quick Start GuideQuick Start Guide
Quick Start GuideQuick Start Guide
Quick Start Guide
English
Safeguards
Detaching the stand (for VESA wall mount)
To detach the stand:
1. Turn the VESA cover counterclockwise to open it.
2. Remove the VESA cover from the stand.
3. Use a screwdriver to remove the four screws on the stand of the
monitor.
CAUTION!CAUTION!
CAUTION!CAUTION!
CAUTION! Have the front of the monitor face down to make the
detachment safer and easier. We recommend that you cover the surface
with soft cloth to prevent damage to the monitor.
Pivot
®
Pro Software
•Installation instructions:Installation instructions:
Installation instructions:Installation instructions:
Installation instructions:
1. Close all other applications first.
2. Make sure your graphics card manufacturer’s (native)
drivers are installed before you install the Pivot
®
Pro
software.
3. Insert the support CD into the optical drive and run the
START_PIVOT program.
• This software only supports Windows
®
98SE, ME, NT 4.0, 2000, and XP
operating systems.
• After the installation, you can set up hotkeys for different rotation
degrees by pressing the right mouse button -- enter Properties --
Settings -- Advanced -- Pivot Software -- Hotkeys.
• For more information or help, go to www.portrait.com.
66
66
6Quick Start GuideQuick Start Guide
Quick Start GuideQuick Start Guide
Quick Start Guide
English
Autres manuels pour PW191 Series
1
Table des matières
Autres manuels Asus Moniteur
Asus
Asus VZ2491R Series Manuel utilisateur
Asus
Asus REPUBLIC OF GAMERS ROG STRIX XG249CM Manuel utilisateur
Asus
Asus VY279HF Series Manuel utilisateur
Asus
Asus VK221S Manuel utilisateur
Asus
Asus VS229D Manuel utilisateur
Asus
Asus VG275 Series Manuel utilisateur
Asus
Asus VZ229HE Manuel utilisateur
Asus
Asus VG2491A Series Manuel utilisateur
Asus
Asus MM17DE Manuel utilisateur
Asus
Asus VZ27EHE Series Manuel utilisateur
Asus
Asus VB172 Series Manuel utilisateur
Asus
Asus VK248H Manuel utilisateur
Asus
Asus VS229NA series Manuel utilisateur
Asus
Asus ZenScreen Touch MB16AMT Manuel utilisateur
Asus
Asus ABF01 Manuel utilisateur
Asus
Asus VG278QR Manuel utilisateur
Asus
Asus VW225TL Manuel utilisateur
Asus
Asus MB17 Series Manuel utilisateur
Asus
Asus VN289 Series Manuel utilisateur
Asus
Asus VP247T Manuel utilisateur
