Assa Abloy PADDE Series Manuel utilisateur

Hole ‘B’ for

timber frame

Hole ‘A’ for

metal frame

Part No. ES3100/ES310 - 121 - 0515

Solenoid

Plunger

Solenoid Leads

Strike Body

Locking Pins

(Long - Short - Short)

Pin Chamber

Fig.1 (Fail Secure)

Locking Pins

(Short - Short - Long)

Solenoid

Plunger

Solenoid Leads

Strike Body

Pin Chamber

Fig.2 (Fail Safe)

To change the electric strike’s mode of lock operation, remove the back

cover and the two screws securing the solenoid.

Remove solenoid from strike housing, and invert the strike. This will release

three locking pins from the strike and keeper chambers.

Re-insert the pins as shown in the diagrams for desired mode of lock

operation (Fail Secure/PTO: See Fig 1; (Fail Safe/PTL: See Fig 2).

Place solenoid back in strike housing, and secure with solenoid screws.

Press strike back cover into position.

CAUTION! When removing solenoid, please be mindful to keep the

plunger in the solenoid as it is not secured, and may be easily misplaced.

• Peel backing off adhesive template and centrally locate in the

marked position, lining up both the mark for the door latch front

face (Line 1) and the centre mark of the latch (Line 2).

• For the metal door drill two Ø5mm holes (A) 22mm above and

below the “X” mark on the template, f or a timber door drill

two Ø3mm holes (B).

• Ensure secondary bolt is not within the strike cavity.

• Using the template as a guide, mortice out the door frame to the

required size.

• Countersink holes in metal frame to accept screws.

• For wider framed doors, an Extension Lip may be required.

Mark centre of Door

latch on frame

(Line 2).

Door Latch

Door

Frame

• To enable the Electric strike to be located in the door frame, first

mark the position of the Door Latch front face on the door frame

with the door in the closed position, (”X”mm).

• Mark where centre of latch meets door frame:

- For new installations, mark frame where front of latch touches

the door frame at the midpoint of the latch bolt.

- For retrofit installations, remove existing strike plate and ensure

the latch fits into and is centred in existing hole.

ES3100 ES310 SERIES ELECTRIC STRIKE

INSTALLATION INSTRUCTIONS

Mark centre of Door

latch on frame

(Line 2).

POSITIONING OF STRIKEMARKING OF STRIKE POSITION

MORTICING REBATE CHANGING MODE OF LOCK OPERATION

CAUTION! Incorrect supply voltage may cause damage not covered by warranty.

Please check supply voltage with a suitable meter to ensure it is within 10-13.8V DC.

Current required is 250mA @ 12V DC

DO NOT OIL OR LUBRICATE.

(10-13.8V DC)

250mA

Fig. 3 - Electrical Schematic

Red

Power (+)

Ground (-)

The installation of a Latch guard is recommended on outward opening

external doors.

An ASSA ABLOY Group brand

• For metal door frames, fit door mounting brackets.

• Once door frame preparation is complete, temporarily fit strike into

door frame to check for interference. Check that the door closes

smoothly and that the latch extends fully past the strike keeper.

• When strike operates correctly with latch, remove strike from

mortice and connect wiring.

Door mounting bracket

• Refit strike and secure, making sure no wires are being crushed.

• Check both mechanical and electronic operation works correctly.

TUBULAR LATCH OPERATION

To ensure deadlatching, ensure

that the deadlatching pin is

depresed by the edge of the

keeper when the door is closed.

Keeper

edge

Deadlatching

ASSEMBLING STRIKE

ELECTRICAL SPECIFICATION

CHECKING FUNCTION

Metal Door Frame

Timber Door Frame

Ce manuel convient aux modèles suivants

Autres manuels Assa Abloy Serrure de porte

Assa Abloy

Assa Abloy Yale Essential Series Manuel utilisateur

Assa Abloy

Assa Abloy EL580 Manuel utilisateur

Assa Abloy

Assa Abloy Rixson 73ER Manuel utilisateur

Assa Abloy

Assa Abloy Yale Keyfree Connected Smart Lock Manuel utilisateur

Assa Abloy

Assa Abloy Sargent PE8700 Series Manuel utilisateur

Assa Abloy

Assa Abloy 179E Guide de l'utilisateur

Assa Abloy

Assa Abloy effeff MAG-600SM Manuel utilisateur

Assa Abloy

Assa Abloy Sargent Signature Series Manuel utilisateur

Assa Abloy

Assa Abloy Sargent KP Series Manuel d'installation

Assa Abloy

Assa Abloy Yale Assure Caractéristiques techniques

Assa Abloy

Assa Abloy Corbin Russwin MP6600 Series Manuel utilisateur

Assa Abloy

Assa Abloy ENTR Manuel utilisateur

Assa Abloy

Assa Abloy PE920 Manuel utilisateur

Assa Abloy

Assa Abloy TD0192 Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin SE LP10 9600 Series Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin Access 600 CL33600 TCRNE1... Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin ED3400 Series Manuel utilisateur

Assa Abloy

Assa Abloy EL460 Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin CLX3300 Series Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin Access 800 Series Manuel utilisateur

Assa Abloy

Assa Abloy ABLOY EL654 Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin ED2400 Series Manuel utilisateur

Assa Abloy

Assa Abloy Sargent IN220 Manuel utilisateur

Assa Abloy

Assa Abloy v.G1 Sargent Manuel utilisateur

Manuels Serrure de porte populaires d'autres marques

We.lock

We.lock SECBNEBL51 Manuel utilisateur

Iseo

Iseo MA1A Manuel utilisateur

ID Lock

ID Lock 150 Manuel utilisateur

Lockly

Lockly ACCESS TOUCH PRO Manuel utilisateur

iLoq

iLoq G50S Manuel utilisateur

SDC

SDC Z7835 Manuel utilisateur

ilco

ilco 452 Manuel utilisateur

Samsung

Samsung shs-h705 Manuel utilisateur

TRU-BOLT

TRU-BOLT 08102017 Manuel utilisateur

CDVI

CDVI 500-LADJ Manuel utilisateur

Igloohome

Igloohome Deadbolt 2S Metal Grey Instructions d'installation et d'entretien

eSSL

eSSL FL-300 Manuel utilisateur

JAKO

JAKO JKBTNX4 Manuel utilisateur

Dorma

Dorma MUNDUS PREMIUM GK 50 Guide de l'utilisateur

SCOOP

SCOOP Pullbloc 4.1 FS Panik Manuel utilisateur

Yale

Yale MORTISE 8800 SERIES Manuel utilisateur

Siegenia

Siegenia KFV AS3500 Manuel utilisateur

Saflok

Saflok Quantum ädesē RFID Manuel utilisateur