ASROCK P4AL-800 Manuel utilisateur

P4AL-800

P4AL-800M

User Manual

Version 1.0

Published August 2003

No part of this manual may be reproduced, transcribed, transmitted, or translated in

any language, in any form or by any means, except duplication of documentation by

the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this manual may or may not be regis-

tered trademarks or copyrights of their respective companies, and are used only for

identification or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:

Specifications and information contained in this manual are furnished for informa-

tional use only and subject to change without notice, and should not be constructed

as a commitment by ASRock. ASRock assumes no responsibility for any errors or

omissions that may appear in this manual.

With respect to the contents of this manual, ASRock does not provide warranty of

any kind, either expressed or implied, including but not limited to the implied warran-

ties or conditions of merchantability or fitness for a particular purpose.

In no event shall ASRock, its directors, officers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of profits, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the manual or product.

ASRock Website: http://www.asrock.com

Contents

1 Introduction ................................................... 4

1.1 Package Contents .......................................................... 4

1.2 Specifications ................................................................ 5

1.3 Motherboard Layout (P4AL-800) .................................. 7

1.4 Motherboard Layout (P4AL-800M) ............................... 8

1.5 ASRock I/OTM (P4AL-800 / P4AL-800M) ....................... 9

2 Installation...................................................... 10

2.1 Screw Holes ................................................................. 10

2.2 Pre-installation Precautions ........................................... 10

2.3 CPU Installation .............................................................. 11

2.4 Installation of Heatsink and CPU fan ............................. 11

2.5 Installation of Memory Modules (DIMM)......................... 12

2.6 Expansion Slots ............................................................. 13

2.7 Jumpers Setup .............................................................. 14

2.8 Connectors .................................................................... 15

3 BIOS Setup ...................................................... 17

3.1 BIOS Setup Utility ........................................................... 17

3.1.1 BIOS Menu Bar ....................................................... 17

3.1.2 Legend Bar ............................................................. 17

3.2 Main Menu ...................................................................... 18

3.3 Advanced, Security, Power, Boot, and Exit Menus ..... 20

4 Software Support ........................................... 21

4.1 Installing Operating System ........................................... 21

4.2 Support CD Information ................................................. 21

4.2.1 Running Support CD ............................................... 21

4.2.2 Drivers Menu .......................................................... 21

4.2.3 Utilities Menu ........................................................... 21

4.2.4 ASRock “PC-DIY Live Demo” Program ................... 21

4.2.5 Contact Information ................................................ 21

Appendix: Advanced BIOS Setup ................... 22

1 Advanced Menu ............................................................... 22

2 Security Menu................................................................... 26

3. Power Menu ..................................................................... 27

4. Boot Menu ......................................................................... 28

5. Exit Menu .......................................................................... 29

Chapter 1 Introduction

Thank you for purchasing ASRock P4AL-800 / P4AL-800M motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control.

It delivers excellent performance with robust design conforming to ASRock’s

commitment to quality and endurance.

Chapter 1 and 2 of this manual contain introduction of the motherboard and step-by-

step installation guide for new DIY system builders. Chapter 3 and 4 contain basic

BIOS setup and Support CD information. For advanced users’ reference, the Appen-

dix appearing on page 22 offers more advanced BIOS setup information.

Because the motherboard specifications and the BIOS software

might be updated, the content of this manual will be subject to

change without notice. In case any modifications of this manual

occur, the updated version will be available on ASRock website

without further notice. You may find the latest memory and CPU

support lists on ASRock website as well.

ASRock website http://www.asrock.com

1.1 Package Contents

ASRock P4AL-800 motherboard

(ATX form factor: 12.0" x 7.8", 30.5 x 19.8 cm)

or ASRock P4AL-800M motherboard

(Micro ATX form factor: 9.6" x 7.8", 24.4 x 19.8 cm)

ASRock P4AL-800 / P4AL-800M Quick Installation Guide

ASRock Intel-ALi Support CD

1 cable for IDE devices (1 x ATA 66 / 100 / 133)

1 cable for floppy drive (1 x ribbon cable)

1 ASRock I/O shield

1.2 Specifications

Platform: P4AL-800:

ATX form factor (12.0" x 7.8", 30.5 x 19.8 cm)

P4AL-800M:

Micro ATX form factor (9.6" x 7.8", 24.4 x 19.8 cm)

CPU: Socket 478 for Intel®Pentium®4 / Celeron®processor

Chipsets: North Bridge:

A800N chipset, FSB @ 800/533/400 MHz,

supports Hyper-Threading Technology (see CAUTION 1);

South Bridge: supports USB 2.0, ATA 133

Memory: 3 DDR DIMM slots: DDR1, DDR2 and DDR3

supports PC1600 (DDR200) / PC2100 (DDR266)

for three DDR DIMM slots, Max. 3.5GB;

supports PC2700 (DDR333)

for two DDR DIMM slots, Max. 2GB;

supports PC3200 (DDR400)

for DDR1 slot only, Max. 1GB

IDE: IDE1: ATA 133 / Ultra DMA Mode 6;

IDE2: ATA 133 / Ultra DMA Mode 6;

Can connect up to 4 IDE devices

Floppy Port: Supports 2 floppy disk drives

Audio: 5.1 channels AC’97 Audio

PCI LAN: Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN

Hardware Monitor:

CPU temperature sensing (ASRock U-COP);

Chassis temperature sensing;

CPU overheat shutdown to protect CPU life

(ASRock U-COP)(see CAUTION 2);

Voltage monitoring: +12V, +5V, +3V, Vcore;

CPU fan tachometer; Chassis fan tachometer

PCI slots: P4AL-800:

5 slots with PCI Specification 2.2

P4AL-800M:

2 slots with PCI Specification 2.2

AGP slot: 1 AGP slot, supports 1.5V, 8X / 4X AGP card (see CAUTION 3)

USB 2.0: 4 default USB 2.0 ports and one extra set of USB 2.0 header to

support two additional USB 2.0 ports upgrade (see CAUTION 4)

ASRock I/OTM:PS/2: 1 keyboard port / 1 mouse port;

1 RJ 45 port; 4 rear default USB 2.0 ports;

1 serial port: COM1; 1 parallel port: ECP/EPP support;

Audio Jack: Line Out / Line In / Microphone + 1 Game port

BIOS: AMI legal BIOS; Supports “Plug and Play”;

ACPI 1.1 compliance wake up events;

Supports jumperfree; SMBIOS 2.3.1 support;

CPU frequency stepless control

(only for advanced users’ reference, see CAUTION 5)

OS: Microsoft®Windows®98SE / ME / 2000 / XP compliant

CAUTION!

1. About the setting of “Hyper Threading Technology”, please check page 22.

2. While CPU overheat is detected, the system will automatically shutdown.

Please check if the CPU fan on the motherboard functions properly before

you resume the system. To improve heat dissipation, remember to spray

thermal grease between the CPU and the heatsink when you install the

PC system.

3. Do NOT plug a 3.3V AGP card in the AGP slot on P4AL-800 / P4AL-800M

motherboard! It may cause permanent damage!

4. Power Management for USB 2.0 works fine under Microsoft®Windows®

XP SP1/2000 SP4. It may not work properly under Microsoft®Windows®

98/ME. Please refer to Microsoft®official document at

http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx

5. Although P4AL-800 / P4AL-800M offers stepless control, it is not

recommended to perform over clocking. When the CPU frequency of

P4AL-800 / P4AL-800M is set to perform over clocking, other clocks, such

as PCI clock, AGP clock, and Memory clock will also be overclocked

proportionally. Frequencies other than the recommended CPU bus

frequencies may cause the instability of the system or damage the CPU

and the motherboard.

1.3 Motherboard Layout (P4AL-800)

1 ATX power connector (ATXPWR1) 14 Infrared module connector (IR1)

2 CPU socket 15 External speaker connector (SPEAKER1)

3 CPU fan connector (CPU_FAN1) 16 South Bridge controller

4 North Bridge controller 17 Clear CMOS (CLRTC1, 3-pin jumper)

5 184-pin DDR DIMM slots 18 PCI slots (PCI 1- 5)

6 CPU heatsink retention module 19 AUDIO CODEC

7 Primary IDE connector (IDE1, Blue) 20 Front panel audio connector (AUDIO1)

8 Secondary IDE connector (IDE2, Black) 21 LAN PHY

9 Chassis fan connector (CHA_FAN1) 22 PS2_USB_PWR1 jumper

10 Floppy connector (FLOPPY1) 23 Internal audio connector: AUX1 (White)

11 Flash Memory 24 Internal audio connector: CD1 (Black)

12 System panel connector (PANEL1) 25 AGP slot (AGP1)

13 USB 2.0 header (USB45, Blue) 26 JR1 jumper

27 JL1 jumper

2MB

BIOS

Super

I/O

P4AL-800

USB2.0

5.1CH

AGP 8X ATA 13 3

DDR400

PCI 1

PCI 2

PCI 3

PCI 4

PCI 5

AUDIO

CODEC

AGP1

USB45

PANEL 1

HDLED RESET

PLED

PWRBTN

SPEAKER1

IR1

CHA_FAN1

FLOPPY1

CMOS

Battery

CLRTC1

ALi

M1563

IDE1 IDE2

ATXPWR1

DDR1 (64/72 bit, 184-pin module)

DDR2 (64/72 bit, 184-pin module)

DDR3 (64/72 bit, 184-pin module)

A800N

Chipset

PGA478B

PS2_USB_PWR1

CPU_FAN1

AUX1

Mic

GAME AUDIO1

USB01

LAN

USB23

Mic in

Line out

GAME AUDIO1

PARALLEL PORT

PS/2

Mouse

PS/2

Keyboard

COM1

Audio1

Line

Line in

CD1

LAN

PHY

19.8cm (7.8 in)

30.5cm (12.0 in)

22 36 21

15 14 12

JR1 JL1

1.4 Motherboard Layout (P4AL-800M)

1 ATX power connector (ATXPWR1) 14 Infrared module connector (IR1)

2 CPU socket 15 External speaker connector (SPEAKER1)

3 CPU fan connector (CPU_FAN1) 16 South Bridge controller

4 North Bridge controller 17 Clear CMOS (CLRTC1, 3-pin jumper)

5 184-pin DDR DIMM slots 18 PCI slots (PCI 1- 5)

6 CPU heatsink retention module 19 AUDIO CODEC

7 Primary IDE connector (IDE1, Blue) 20 Front panel audio connector (AUDIO1)

8 Secondary IDE connector (IDE2, Black) 21 LAN PHY

9 Chassis fan connector (CHA_FAN1) 22 PS2_USB_PWR1 jumper

10 Floppy connector (FLOPPY1) 23 Internal audio connector: AUX1 (White)

11 Flash Memory 24 Internal audio connector: CD1 (Black)

12 System panel connector (PANEL1) 25 AGP slot (AGP1)

13 USB 2.0 header (USB45, Blue) 26 JR1 jumper

27 JL1 jumper

P4AL-800M

USB2.0

5.1CH

AGP 8X

ATA 133

DDR400

2MB

BIOS

Super

I/O

PCI 1

PCI 2

AUDIO

CODEC

AGP1

USB45

PANEL 1

HDLED RESET

PLED

PWRBTN

SPEAKER1

IR1

CHA_FAN1

FLOPPY1

CMOS

Battery

CLRTC1

ALi

M1563

A800N

Chipset

PGA478B

PS2_USB_PWR1

CPU_FAN1

AUX1

Mic

GAME AUDIO1

USB01

LAN

USB23

Mic in

Line out

GAME AUDIO1

PARALLEL PORT

PS/2

Mouse

PS/2

Keyboard

COM1

Audio1

Line

Line in

CD1

LAN

PHY

19.8cm (7.8 in)

24.4cm (9.6 in)

22 362

18 16 12

JR1 JL1

IDE1 IDE2

ATXPWR1

DDR1 (64/72 bit, 184-pin module)

DDR2 (64/72 bit, 184-pin module)

DDR3 (64/72 bit, 184-pin module)

1.5 ASRock I/OTM (P4AL-800 / P4AL-800M)

1 Parallel port 6 Line Out (Lime)

2 RJ-45 port 7 USB 2.0 ports

3 Game port 8 Serial port (COM1)

4 Microphone (Pink) 9 PS/2 keyboard port (Purple)

5 Line In (Light Blue) 10 PS/2 mouse port (Green)

123

4567

910

Chapter 2 Installation

P4AL-800 is an ATX form factor (12.0" x 7.8", 30.5 x 19.8 cm) motherboard;

P4AL-800M is a Micro ATX form factor (9.6" x 7.8", 24.4 x 19.8 cm) motherboard.

Before you install the motherboard, study the configuration of your chassis to

ensure that the motherboard fits into it.

Make sure to unplug the power cord before installing or removing the

motherboard. Failure to do so may cause physical injuries to you and

damages to motherboard components.

2.1 Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the

chassis.

Do not over-tighten the screws! Doing so may damage the

motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity, NEVER

place your motherboard directly on the carpet or the like. Also remember to use

a grounded wrist strap or touch a safety grounded object before you handle

components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or

in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard,

peripherals, and/or components.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ASROCK Carte mère

ASROCK

ASROCK 4CoreDual-SATA2 Manuel utilisateur

ASROCK

ASROCK Z97 Extreme3 Manuel utilisateur

ASROCK

ASROCK ATW-HC2260 Manuel utilisateur

ASROCK

ASROCK IMB-192 Manuel de service

ASROCK

ASROCK Z87 Extreme4 TB4 Manuel utilisateur

ASROCK

ASROCK 985GM-GS3 FX Manuel utilisateur

ASROCK

ASROCK H61 Pro BTC Manuel utilisateur

ASROCK

ASROCK iBOX-V2000 Series Manuel utilisateur

ASROCK

ASROCK 890FX Deluxe5 Manuel utilisateur

ASROCK

ASROCK Z270 SUPERCARRIER Manuel utilisateur

ASROCK

ASROCK G41M-LE Manuel utilisateur

ASROCK

ASROCK M8 Instructions de montage

ASROCK

ASROCK B550 Phantom Gaming 4/ac Manuel utilisateur

ASROCK

ASROCK H67M-GE/HT Manuel utilisateur

ASROCK

ASROCK A75M-HVS Manuel utilisateur

ASROCK

ASROCK H110M Combo-G Manuel utilisateur

ASROCK

ASROCK 890GX EXTREME4 Manuel utilisateur

ASROCK

ASROCK B75M-GL R2.0 Manuel utilisateur

ASROCK

ASROCK 960GC-GS FX Manuel utilisateur

ASROCK

ASROCK H61M-VG4 Manuel utilisateur

ASROCK

ASROCK ROME2D32GM-2T Manuel utilisateur

ASROCK

ASROCK Fatal1ty Z170 Gaming K4 Series Manuel utilisateur

ASROCK

ASROCK Rack MT-C224 Manuel utilisateur

ASROCK

ASROCK B75TM-ITX Manuel de référence

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur