ASROCK IMB-142 Manuel utilisateur

IMB-142

User Manual

Version 1.0

Published June 2013

No part of this manual may be reproduced, transcribed, transmitted, or translated in

any language, in any form or by any means, except duplication of documentation by

the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this manual may or may not be regis-

tered trademarks or copyrights of their respective companies, and are used only for

identication or explanation and to the owners’ benet, without intent to infringe.

Disclaimer:

Specications and information contained in this manual are furnished for informa-

tional use only and subject to change without notice, and should not be constructed

as a commitment by ASRock. ASRock assumes no responsibility for any errors or

omissions that may appear in this manual.

With respect to the contents of this manual, ASRock does not provide warranty of

any kind, either expressed or implied, including but not limited to the implied warran-

ties or conditions of merchantability or tness for a particular purpose.

In no event shall ASRock, its directors, ofcers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from

any defect or error in the manual or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-

lowing two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in Cali-

fornia, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

The terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

Contents

1 Introduction........................................................ 5

1.1 Package Contents ......................................................... 5

1.2 Specications ................................................................ 6

1.3 Motherboard Layout ...................................................... 7

1.4 I/O Panel ....................................................................... 8

2 Installation.......................................................... 9

2.1 Screw Holes................................................................... 9

2.2 Pre-installation Precautions ........................................... 9

2.3 Installation of Memory Modules (DIMM) ........................ 10

2.4 Expansion Slot .............................................................. 11

2.5 Jumpers Setup............................................................... 12

2.6 Onboard Headers and Connectors................................ 13

Chapter 1: Introduction

Thank you for purchasing ASRock IMB-142 motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-

step guide to the hardware installation.

Because the motherboard specications and the BIOS software might be

updated, the content of this manual will be subject to change without no-

tice. In case any modications of this manual occur, the updated version

will be available on ASRock website without further notice. You may nd

the latest VGA cards and CPU support lists on ASRock website as well.

ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specic information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock IMB-142 Motherboard

(Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0 cm)

ASRock IMB-142 Driver CD

ASRock IMB-142 Jumper setting instruction

1 x I/O Panel Shield

1.2 Specifications

Form

Factor Dimensions - Mini-ITX (6.7-in x 6.7-in)

Processor

System

CPU

- Intel®Dual-Core Atom™ CedarView Processor

D2550/N2600/N2800

- Supports Hyper-Threading Technology

Core

Number - 2

Max Speed - D2550/N2800: 1.86 GHz

- N2600: 1.6GHz

L3 Cache - N/A

Chipset - NM10

BIOS - UEFI

Expansion

Slot

PCI - 1

Mini-PCIe - 1 (Full Size)

mSATA - 0

PCIe - 0

CFast Card

Socket - 0

Memory

Technology - Single Channel DDR3 800/1066 MHz SDRAM

Max. - D2550/N2800: 4GB

- N2600: 2GB

Socket - D2550/N2800: 2 x SO-DIMM

- N2600: 1 x SO-DIMM

Graphics

Controller - Intel®PowerVR SGX545, Support Directx9

compliant Pixel Shader v3.0 and OGL 3.0

VRAM - Shared Memory

VGA - By Header, supports max resolution

1920x1200

LVDS - Single Channel 18bits, max resolution

1440x900

HDMI - Supports HDMI 1.3a, max resolution

1920x1200

DVI - Yes, supports max resolution 1920x1200

Display Port - No

Multi Display - Yes

Ethernet

Ethernet - 10/100/1000 Mbps

Controller - GbE LAN: 2 x Intel®WG82574L

Connector - 2 x RJ-45

SATA

Max Data

Transfer

Rate

- SATA2 (3.0Gb/s)

Rear I/O

VGA - 0

DVI - 1 (DVI-D)

HDMI - 1

DisplayPort - 0

Ethernet - 2

USB - 2 (USB 2.0 compliant)

Audio - 2 (Mic-in, Line-out)

Serial - 0

PS/2 - 0

Internal

Connector

USB - 6 (USB 2.0 compliant)

LVDS/

Inverter - 1/0

VGA - 1

Serial - 2 (RS-232)

SATA - 2 x SATA2 (3.0Gb/s)

mPCIe - 1

Parallel - 0

mSATA - 0

IrDA - 0

GPIO 8-bit - 4 x GPI + 4 x GPO

SATA PWR

Output Con - 1

Speaker

Header - 0

Watchdog

Timer

Output - N/A

Interval - N/A

Power

Requirements

Input PWR - 12V DC-In (4-pin ATX PWR Con)

Power On - ATX Supported: Press Button to PWR on

after Power input ready

Environment Temperature - 0ºC – 60ºC

1.3 Motherboard Layout

1 JCF Power Connector (JCF PWR1) 16 Clear CMOS Jumper (CLRCMOS1)

2 ATX 12V Power Connector (ATX12V1) 17 Chassis Speaker Header

3 CPU Fan Connector (CPU_FAN1) (SPEAKER 1, White)

4 Chassis Fan Connector (CHA_FAN2) 18 JPS Connector (JPS2)

5 Chassis Fan Connector (CHA_FAN1) 19 USB 2.0 Header (USB2_3, Blue)

6 CPU Heatsink 20 USB 2.0 Header (USB4_5, Blue)

7 2 x DDR3 DIMM Slots 21 Chipset Heatsink

8 16Mb Flash 22 PCI Slot (PCI1)

9 SMBUS Connector (SMBUS1) 23 JGP IO Connector (JGP IO1)

10 SATA2 Connector (SATAII_1, Blue) 24 COM Port Header (COM1)

11 SATA2 Connector (SATAII_2, Red) 25 COM Port Header (COM2)

12 USB 2.0 Header (USB6_7, Blue) 26 PCI Express x1 Slot (PCIE1, White)

13 JPWR Connector (JPWR1) 27 LVDS Connector (LVDS1)

14 SATA Power Connector (SATAPWR1) 28 CON1

15 System Panel Header (PANEL1, White) 29 VGA Header (VGA1)

17.0cm (6.7 in)

HDMI1

DVI2

Top:

Front

Bottom:

Mic In

USB 2.0

T: USB0

B: USB1

LAN2 LAN1

JCF PWR1

VGA1

Super

COM2

COM1

AUDIO

CODEC

PCI1

JGP IO1

JPS2

SPEAKER1

CLRCMOS1

SATAPWR1

USB2_3

USB4_5

USB6_7

PANE L 1

HDLED RESET

PLED PWRBTN

JPWR1

SATAI I_1 S ATAII _2

CMOS

Battery

16Mb

BIOS

FSB800

DDR3_A1

DDR3_A2

CPU_FAN1 CHA_FAN2 CHA_FAN1

PCIE1

CON1

SMBUS1

RoHS

Designe d in Taipei

ErP/EuP Ready

124

3567

20 19 18 17

LVDS 1

1.4 I/O Panel

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

1 Line out (Lime)

2 Microphone (Pink)

* 3 LAN RJ-45 Port

* 4 LAN RJ-45 Port

5 USB 2.0 Ports (USB01)

6 DVI-D Port (DVI1)

7 HDMI Port (HDMI1)

ACT/LINK

LED

SPEED

LED

LAN Port

Chapter 2: Installation

This is a Mini-ITX form factor (6.7" x 6.7", 17.0 x 17.0 cm) motherboard. Before you

install the motherboard, study the conguration of your chassis to ensure that the

motherboard ts into it.

Make sure to unplug the power cord before installing or removing the

motherboard. Failure to do so may cause physical injuries to you and

damages to motherboard components.

2.1 Screw Holes

Place screws into the holes to secure the motherboard to the chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity,

NEVER place your motherboard directly on the carpet or the like. Also

remember to use a grounded wrist strap or touch a safety grounded object

before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or

in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard, peripherals,

and/or components.

2.3 Installation of Memory Modules (SO-DIMM)

This motherboard provides two 204-pin DDR3 (Double Data Rate 3) SO-DIMM

slots.

It is not allowed to install a DDR or DDR2 memory module into DDR3

slot; otherwise, this motherboard and SO-DIMM may be damaged.

Installing a SO-DIMM

Please make sure to disconnect power supply before adding or

removing SO-DIMMs or the system components.

Step 1. Unlock a SO-DIMM slot by pressing the retaining clips outward.

Step 2. Align a SO-DIMM on the slot such that the notch on the SO-DIMM

matches the break on the slot.

The SO-DIMM only ts in one correct orientation. It will cause perma-

nent damage to the motherboard and the SO-DIMM if you force the SO-

DIMM into the slot at incorrect orientation.

Step 3. Firmly insert the SO-DIMM into the slot until the retaining clips at both

ends fully snap back in place and the SO-DIMM is properly seated.

Table des matières

Autres manuels ASROCK Carte mère

ASROCK

ASROCK 890GX Extreme3 Manuel utilisateur

ASROCK

ASROCK H61DEL Manuel utilisateur

ASROCK

ASROCK A780GXH-128M Manuel utilisateur

ASROCK

ASROCK K7S41GX Manuel utilisateur

ASROCK

ASROCK 775Twins-HDTV R2.0 Manuel utilisateur

ASROCK

ASROCK Z68M-ITX/HT Manuel utilisateur

ASROCK

ASROCK B85iCafe4 Manuel utilisateur

ASROCK

ASROCK Z97M OC Formula Manuel utilisateur

ASROCK

ASROCK 939S56-M Manuel utilisateur

ASROCK

ASROCK A75iCafe Manuel utilisateur

ASROCK

ASROCK Z370M Pro4 Manuel utilisateur

ASROCK

ASROCK AM1H-M Manuel utilisateur

ASROCK

ASROCK 890GM Pro3 R2.0 Manuel utilisateur

ASROCK

ASROCK Z170M-PIO2 Manuel utilisateur

ASROCK

ASROCK P55 DELUXE3 - V1.0 Manuel utilisateur

ASROCK

ASROCK G41C-GS Manuel utilisateur

ASROCK

ASROCK Z77 Extreme11 Manuel utilisateur

ASROCK

ASROCK M3A790GXH/128M Manuel utilisateur

ASROCK

ASROCK N68-GE3 UCC - Manuel utilisateur

ASROCK

ASROCK Z77 WS Manuel utilisateur

ASROCK

ASROCK IMB-A182P Manuel utilisateur

ASROCK

ASROCK H310M-HDVP Manuel utilisateur

ASROCK

ASROCK H67M-ITX Manuel utilisateur

ASROCK

ASROCK Z170 OC FORMULA Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur