ASROCK 4X4-V2000 Manuel utilisateur

4X4-V2000

User Manual

Version 1.0

Published September 24, 2021

Version 1.0

Published September 24, 2021

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRockind Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRockind. ASRockind assumes no responsibility

for any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRockind does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRockind, its directors, ocers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRockind has been advised of the possibility of such damages arising from

any defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRockind Website: http://www.asrockind.com

e terms HDMI®and HDMI High-Denition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

CAUTION:

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Contents

1 Introduction ....................................................... 5

1.1 Package Contents ......................................................... 5

1.2 Specications................................................................. 6

1.3 Motherboard Layout....................................................... 8

1.4 I/O Panel........................................................................ 9

2 Installation ......................................................... 10

2.1 Screw Holes................................................................... 10

2.2 Pre-installation Precautions ........................................... 10

2.3 Installation of Memory Modules (SO-DIMM).................. 11

2.4 Expansion Slots ............................................................ 12

2.5 Jumpers Setup............................................................... 13

2.6 Onboard Headers and Connectors................................ 14

3 UEFI SETUP UTILITY......................................... 17

3.1 Introduction .................................................................... 17

3.1.1 UEFI Menu Bar .................................................... 17

3.1.2 Navigation Keys ................................................... 18

3.2 Main Screen................................................................... 18

3.3 Advanced Screen........................................................... 19

3.3.1 CPU Conguration ............................................... 20

3.3.2 Chipset Conguration........................................... 21

3.3.3 Storage Conguration .......................................... 22

3.3.4 Super IO Conguration ........................................ 23

3.3.5 ACPI Conguration............................................... 24

3.3.6 USB Conguration ............................................... 25

3.3.7 Trusted Computing............................................... 26

3.4 Hardware Health Event Monitoring Screen ................... 27

3.5 Security Screen ............................................................. 28

3.6 Boot Screen ................................................................... 29

3.7 Exit Screen .................................................................... 31

4 Software Support .............................................. 32

4.1 Install Operating System................................................ 32

4.2 Support CD Information ................................................. 32

4.2.1 Running Support CD............................................ 32

4.2.2 Drivers Menu........................................................ 32

4.2.3 Utilities Menu........................................................ 32

4.2.4 Contact Information.............................................. 32

Chapter 1: Introduction

Thank you for purchasing ASRockind 4X4-V2000 motherboard, a reliable mother-

board produced under ASRockind’s consistently stringent quality control. It delivers

excellent performance with robust design conforming to ASRockind’s commitment to

quality and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-

by-step guide to the hardware installation. Chapter 3 and 4 contain the conguration

guide to BIOS setup and information of the Support CD.

Because the motherboard specications and the BIOS software might be

updated, the content of this manual will be subject to change without no-

tice. In case any modications of this manual occur, the updated version

will be available on ASRockind website without further notice. You may

nd the latest CPU support lists on ASRockind website as well.

ASRockind website https://www.asrockind.com/

If you require technical support related to this motherboard, please visit

our website for specic information about the model you are using.

https://www.asrockind.com/support/index.asp

1.1 Package Contents

ASRockind 4X4-V2000 Motherboard

(NUC 4.09” x 4.02” (104 x 102mm))

ASRockind 4X4-V2000 Driver CD

ASRockind 4X4-V2000 Jumper setting instruction

1.2 Specications

Form

Factor Dimensions NUC 4.09" x 4.02" (104 x 102mm)

Processor

System

CPU

4X4-V2000M (V2718, 8C, Max Speed up to

4.15GHz)

4X4-V2000V (V2516, 6C, Max Speed up to

3.95GHz)

Chipset SoC

BIOS AMI SPI 128 Mbit

Expansion

Slot M.2 1 x M.2 (Key E, 2230) with PCIe x1, USB 2.0 and

CNVio for Wireless

Memory

Technology Dual Channel DDR4 3200 MHz

Capacity 64GB (32 GB per DIMM)

Socket 2 x 260-pin SO-DIMM

Graphics

Controller AMD Radeon™ Graphics

HDMI HDMI 2.0a

Max resolution up to 4096x2160@60Hz

DisplayPort DisplayPort 1.2a, DP++

Max resolution up to 4096x2160@60Hz

Multi Display Max 4 display (Included 2 outputs from type C)

Audio Interface Realtek ALC233, High Denition Audio.

Ethernet

Controller/

Speed

LAN1: 1 x Realtek RTL8125BG with

10/100/1000/2500 Mbps

LAN2: 1 x Realtek R8111EPV (Dash) with

10/100/1000 Mbps

Connector 2 x RJ-45

Front I/O USB

2 x USB 3.2 Gen2 (Type A)

2 x USB 3.2 Gen2 (Type C) (Supports DP1.2a

display output)

Audio 1 (headphone & microphone jack)

Rear I/O

HDMI 1 x HDMI 2.0a

DisplayPort 1 x DP1.2a

Ethernet 2 x 1 Gigabit LAN

USB 2 x USB 2.0

DC Jack 1

Internal

Connector

USB USB (1x2.0 pitch header)

COM 1 x COM (RS-232/422/485)

TPM Innion SLB9670VQ2.0

eDP 1

Storage M.2

1 x M.2 (KEY M, 2242/2260/2280) with

PCIe x4 and SATA3 for SSD

*M.2 Key M 2280 (Supported by bracket)

SATA 1 x SATA3.0 (6.0 Gb/s)

Watchdog

Timer

Output From Super I/O to drag RESETCON#

Interval 256 segments, 0,1,2…255sec

Power

Requirements

Input PWR 12V~19V DC-In Jack

Power On

AT/ATX Supported

AT: Directly PWR on as Power input ready

Environment ATX: Press Button to PWR on

after Power input ready

Environment

Operating

Temp 0ºC ~ 60ºC

Storage

Temp -40ºC ~ 85°C

Operating

Humidity 5% ~ 90%

Storage

Humidity 5% ~ 90%

1.3 Motherboard Layout

1 :

SIO_AT1

2 :

M.2 Key-M Socket (M2M_1)

3 :

M.2 Key-E Socket (M2E_1)

4 :

Front Panel Audio Header

5 : USB2.0 Connector (USB2H_1_2)

6 :

COM Port Header (RS232/422/485)

7 : SATA3 Port (SATA3_0)

8 :

Clear CMOS Header (CLRCMOS1)

9 :

System Panel Header (PANEL1)

Back Side :

Power Button (PWR_BTN3)

Fan Connector (FAN1)

Battery Connector (BAT1)

LPC Connector (LPC1)

1.4 I/O Panel

** There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

O󰀨 No Link O󰀨 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

ACT/LINK

LED

SPEED

LED

LAN Port

1 LAN RJ-45 Port (LAN1)*

2 LAN RJ-45 Port (LAN2)**

3 HDMI Port (HDMI1)

4 DisplayPort (DP2)

5 USB 2.0 Ports (USB2_2_3)

6 DC-In Jack (DC_IN1)

7 USB 3.2 Gen2 Type-C Port (USB31_TC_2)

8 USB 3.2 Gen2 Ports (USB3_1_5)

9 USB 3.2 Gen2 Type-C Port (USB31_TC_1)

10 Audio Jack (AUDIO1)

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

O󰀨 No Link O󰀨 10Mbps connection

Blinking Data Activity Orange 100Mbps/1Gbps connection

On Link Green 2.5Gbps connection

ACT/LINK

LED

SPEED

LED

LAN Port

Chapter 2: Installation

Before you install the motherboard, study the conguration of your chassis to ensure

that the motherboard ts into it.

Make sure to unplug the power cord before installing or removing the

motherboard. Failure to do so may cause physical injuries to you and

damages to motherboard components.

2.1 Screw Holes

Place screws into the holes to secure the motherboard to the chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity,

NEVER place your motherboard directly on the carpet or the like. Also

remember to use a grounded wrist strap or touch a safety grounded object

before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or

in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched o󰀨 or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard, peripherals,

and/or components.

Table des matières

Autres manuels ASROCK Carte mère

ASROCK

ASROCK 970 Pro2 Manuel utilisateur

ASROCK

ASROCK A75 Pro4 MVP Manuel utilisateur

ASROCK

ASROCK Fatal1ty B360M Performance Manuel utilisateur

ASROCK

ASROCK X58 DELUXE Manuel utilisateur

ASROCK

ASROCK Q1900DC-ITX Manuel utilisateur

ASROCK

ASROCK Fatal1ty B85 Killer Manuel utilisateur

ASROCK

ASROCK Z590 Taichi Manuel utilisateur

ASROCK

ASROCK FM2A88M-DG3+ Manuel utilisateur

ASROCK

ASROCK FM2A88M-HD+ R3.0 Manuel utilisateur

ASROCK

ASROCK 1U2LW Series Manuel utilisateur

ASROCK

ASROCK IMB-156 Manuel utilisateur

ASROCK

ASROCK P41C-DE - V1.0 Manuel utilisateur

ASROCK

ASROCK Phantom Gaming 4 Z690 Manuel utilisateur

ASROCK

ASROCK W790 WS Manuel utilisateur

ASROCK

ASROCK Q1900-ITX Manuel utilisateur

ASROCK

ASROCK H61 Pro BTC Manuel utilisateur

ASROCK

ASROCK Z87 Extreme11/ac Manuel utilisateur

ASROCK

ASROCK 4COREDX90-VSTA - V1.0 Manuel utilisateur

ASROCK

ASROCK WOLFDALE1333-D667 Manuel utilisateur

ASROCK

ASROCK H81M-VG4 R2.0 Manuel utilisateur

ASROCK

ASROCK 775Dual-915GL Manuel utilisateur

ASROCK

ASROCK SuperAlloy Z170 Pro4S Manuel utilisateur

ASROCK

ASROCK Fatal1ty 970 Performance/3.1 Series Manuel utilisateur

ASROCK

ASROCK P67 PRO3 SE - ANNEXE 409 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur