Aspect NVR-8MPOE-4 Manuel utilisateur
NETWORK VIDEO RECORDER QUICK START GUIDE
Technical Documents
NVR-8MPOE-4 NVR-12MPOE-16
NVR-8MPOE-8 NVR-12MPOE-32
NVR-12M-64
NETWORK VIDEO RECORDER
QUICK START GUIDE
NETWORK VIDEO RECORDER QUICK START GUIDE
WHAT’S IN THE BOX
Technical
Documents
NVR USB Mouse
Remote Control DC 48V PSU (4ch/ 8ch)
HDD Mounting Screws Rack Mount Ears (32ch/ 64ch)
UK Kettle Lead Quick Start Guide
QR Code
1. INSTALLATION
Rear Panel
1 – NVR-8MPOE-4
2 - NVR-8MPOE-8
3 - NVR-12MPOE-16, NVR-12MPOE-32
4 - NVR-12M-64
No.
Name
Description
1
CAM1
–
CAM4 (
NVR
-
8MPOE
-
4
)
CAM1 – CAM8 (NVR-12MPOE-8)
CAM1 – CAM16 (NVR-12MPOE-16/32)
Ethernet ports used for connecting and providing
power to cameras.
2 ETHERNET/WAN
Network port for connection to the Internet, router, or
network switch (no POE from this port).
3 VGA
VGA display output for connection to a main display
monitor (Max. 1920x1080 display resolution).
4 HDMI
HDMI display output for connection a main display
monitor (Max. 3840x2160 display resolution).
5
ALARM
IN
Alarm input terminals (AI1~A16
, GND).
6 RS-485 (NVR-12M-64)
Communications port for connecting
PTZ camera with
RS-485 support.
NETWORK VIDEO RECORDER QUICK START GUIDE
7
ALARM OUT
Alarm relay output port (N/O, N/C, COM).
8
POWER INPUT
Power input for the NVR.
9 LAN (DOWNLINK) (NVR-12M-64)
Network port
used for connecting a network switch
from which network cameras are connected and
powered.
10 AUDIO IN/OUT
RCA connectors for the
connection of microphones and
speakers.
Front Panel
1 – NVR-8MPOE-4, NVR-8MPOE-8
2 - NVR-12MPOE-16, NVR-12MPOE-32
3 - NVR-12M-64
No.
Name
Description
1
IR REMOTE CONTROL RECEIVER
Receives the control signal from included remote control.
2
USB
x2
For connect
ing USB devices such as a mouse
3
STATUS LED
Displays the status of
p
ower,
n
etwork, and
h
ard drive
NETWORK VIDEO RECORDER QUICK START GUIDE
2. INSTALLATION: SYSTEM TOPOLOGY
ASPECT is designed as an out of the box CCTV system which has been optimised to improve the installation
experience.
Connect the ASPECT IP cameras to the POE ports of the ASPECT NVR, display the video and automatically
start recording the camera. Follow the following instruction to set up the operations of the system. For
further information refer to the User manual, available to download by scanning the QR code within this
guide.
Default credentials:
Username: admin
Password: (no password)
[NOTE] For security reasons it is highly recommended each user creates a password that includes uppercase
& lower case letters, numbers, and special characters.
NETWORK VIDEO RECORDER QUICK START GUIDE
3. START UP WIZARD
1. The
startup
window
will a
ppear after the
enhanced security password has been
set
2. The startup wizard will guide the user through the initial set up the NVR
3. Use the tick box to set whether or not the startup wizard will open on future boot ups
4. Click <Next Step> System Login
1. Select a user ID and enter the corresponding
password. The default user ID is “admin” and the
default password is blank, however the user will set
an enhanced security password.
2. Click <OK>.
NETWORK VIDEO RECORDER QUICK START GUIDE
4. START UP WIZARD: ENHANCED SECURITY PASSWORD
5. START UP WIZARD: SET CONTINUOUS, ALARM & SYSTEM ALARM RECORDING
As default all channels are set to record all types. It is
possible to set 6 periods of recording profiles.
1. Select a channel; define the pre-record time and
which stream to record (main/sub).
2. Select Continuous, Alarm or System alarm
recording types from the right-hand side.
3. Use the mouse to click and drag along the
timeline to turn on or off recording to create the
recording schedule.
4. Use the ‘Copy to’ button to apply these settings
to other channels or repeat steps 1-3.
It is highly recommended that secure passwords
and user accounts are created to increase security
on the CCTV system. Aspect helps protect your
CCTV by encouraging the use of secure usernames
and passwords for users.
1. Enter current password, the default is
blank
2. Enable Enhanced Security
3. Enter new password of upper case &
lower- case letters, numbers and special
characters.
4. Confirm new password.
5.
Enter an email address where a password recovery code will be sent in the event of a user
forgetting their password
i. It is advised that the email account for password recovery is a generic mailbox that
multiple individuals can access in the event of a forgotten password to reset the
device.
Ensure that this step is repeated for any new users. Remember, if the admin password is changed in this
step the connection details within the ASPECT app will need to be updated.
Depending on the device it is possible to also record the sub stream, benefits of recording the sub stream of
any channel, particularly high resolution cameras increases the performance and ability in playback. If the
feature is supported by the device, select the tick box in the top right corner of the window labelled “Sub
Stream”
NETWORK VIDEO RECORDER QUICK START GUIDE
6. START UP WIZARD: NETWORK SETTINGS
DHCP is enabled by default. Untick DHCP to apply a static IP address, ensure to configure the correct
settings for the network to enable stable connection to IP cameras in the same range and remote access.
[NOTE] Using the mouse, click into the field to open the on screen keyboard and enter the numbers to set
the network settings.
NETWORK VIDEO RECORDER QUICK START GUIDE
7. START UP WIZARD: P2P CONNECTION
Using a smart phone, scan the QR codes on screen for either the iOS or Android labelled image, this will
direct the phone to the app download store.
1. Open the ASPECT application on the smart phone.
2. Tap ‘Register’ in the top right-hand corner, then register your credentials and then Login to the app.
a. Creating an account allows user to connect multiple sites.
3. Open the ‘Menu’ by tapping the top left option.
4. Tap ‘Devices’ then the ‘+’ in the top right and select ‘Manual Adding’.
5. Set a name for the device so the user can easily identify it from a list; the location of the install is a
popular way to name connections.
6. Tap the QR code icon and allow the app access to the devices camera, now scan the QR code. from
the start up wizard labelled ‘Cloud ID’. This will enter the connection information to the device to the
app.
7. Enter the username and password and set which stream to open by default when connecting to the
device. Choosing sub stream over main will increase video display speeds and reduce mobile data
usage.
8. Tap ‘Save’ in the top right corner, then you will be able to ‘Start Live View’.
http://aspectviewer.net
NETWORK VIDEO RECORDER QUICK START GUIDE
8. LIVE VIEW – ENTER THE MENU
From Live View, right click the mouse to access the menu.
Main Menu – Access to all NVR function and settings
Start up Wizard – Launch the start up wizard
Auto channel Config – Search and add all compatible
IP cameras
IP Channel – Configure connection to IP cameras
Channel status – View the status of recording of each
channel
Playback – Shortcut to playback functions
Record Control – Open control settings for recording
PTZ Control – Open PTZ controls
Colour Setting – Adjust the camera colour settings
Output Adjust – Adjust the display output
Mute – Turn off the sound
Shutdown – Logout, switch user, restart or shutdown
shortcut
View – Change the Live View layout
NETWORK VIDEO RECORDER QUICK START GUIDE
9. ADDING IP CAMERAS
The NVR’s POE ports are preconfigured with an internal IP address which is used by the NVR to manage
connections. When ASPECT IP cameras are connected via the POE ports the video will automatically
populate in the order the cameras were plugged in.
1. Connect network cable from the IP camera to the POE port of the NVR
[NOTE] Adding other IP cameras may not automatically populate and the IP address of the channel will
need to be configured; refer to the user manual for detailed instructions.
It is
also
possible to connect cameras from the WAN by configuring network IP cameras to the same IP
range as the NVR. Refer to Step 6 of this guide.
Adding IP cameras from the network:
1. Ensure the NVR is properly configured to the WAN.
2. Right click from Live view then click ‘IP channel’.
3. Use the bottom window to scan the network for compatible IP cameras.
4. Select the channel position from the top window.
a. Change the connection type buy click the Pencil icon and change UPNP to Manual and
ok
5. Double click the desired IP address to add the selected channel position above.
[NOTE] Channels where the IP address is preconfigured refer to the user manual to edit the connection.
[NOTE] If the camera does not load in the selected position after double clicking, try deleting the
information of the connection by clicking the red X then double clicking the IP address to add here
Ce manuel convient aux modèles suivants
4
Table des matières
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
