Asoni CAM410 Manuel utilisateur

CMOS Network Camera

CAM410 / CAM410W

User’s Manual

Version: 3.1

Date: 5/22/2008

Content

1. Preface .................................................................................................................................2

2. Product Specifications...........................................................................................................2

3. Product Installation ...............................................................................................................4

A. Hardware Installation.........................................................................................................4

B. Monitor Setting..................................................................................................................5

C. IPAssignment ...................................................................................................................6

D. Install ActiveX Control .......................................................................................................8

4. Live Video...........................................................................................................................10

5. Configuration ......................................................................................................................12

A. System............................................................................................................................12

B. Video/Audio Settings.......................................................................................................18

C. Network...........................................................................................................................24

D. Event Handling................................................................................................................29

6. Network Configuration ........................................................................................................36

7. Factory Default ...................................................................................................................38

Appendix....................................................................................................................................39

1. Preface

CAM410/410W is a CMOS network Camera. It builds in web server. User views real-time

video via IE browser.

CAM410/410W supports MPEG-4 video compression which provides smooth and high

quality video. The video can be stored in the SD card, and can be playback remotely using

Microsoft Media Player.

CAM410/410W is an easy-to-use network camera which is designed for home security

application.

2. Product Specifications

zMPEG-4 compression formats and dual streaming. Supports resolution up to VGA.

zSelf-Contained HTTP Web Server providing Internet capability for remote access

zWireless network connection (CAM410W)

zSupports SD card for local recording

z2-way audio

zOnline firmware upgrade

zReal-time video recording

zRecorded files compatible with Microsoft Windows Media Player

Hardware

CPU ARM 9 ,32 bit RISC

RAM 64MB

ROM 4MB

Image Sensor 1/4” CMOS

Microphone Built-in

Audio Out 1

Power Consumption LAN: DC 5V, 700mA WLAN: DC5V, 900mA

Network

Ethernet 10/ 100 Base-T

Wireless (CAM410W) 802.11b/g

WEP 64 / 128 bit

Network Protocol HTTP, TCP/IP, RTP/RTSP, 3GPP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP

System

Video Resolution 640x480, 320x240, 160x120

Video Adjustment Brightness, Contrast, Exposure, Sharpness

Image Snapshot Yes

Full Screen Monitoring Yes

Compression Format MPEG-4

Video BitrateAdjustment CBR, VBR

Motion Detection Yes, 3 different areas

Triggered Action Mail, FTP, Save to SD card

Pre/ Post Alarm Yes, configurable

Security Password protection

Firmware Upgrade HTTP mode, can be upgraded remotely

Simultaneous Connection Up to 10

Audio Yes, 2-way

SD card management

Recording Trigger Motion detection, IP check, Network break down (available for Wire

connection)

Video Format AVI

Video Playback Yes

File Management Yes, can be deleted or overwrite

Web browsing requirement

OS Windows 2000, XP, 2003, Microsoft IE 6.0 or above

Hardware Suggested Intel-C 2.0G, RAM: 512MB, Graphic card: 64MB

Minimum Intel-C 1.6G, RAM: 256MB, Graphic card: 32MB

3. Product Installation

A. Hardware Installation

nNetwork Connector: The RJ-45 connector allows connect the Ethernet cable.

oPower Jack: To connect the included power adapter.

pAudio Out: The RCA connector allows connect to an amplified speaker,

you can hear the voice of the remote site from the speaker.

qSD Card Slot: Insert a SD card if you want to do the event recording in the

camera.

rAntenna Connector: Available for CAM410W. To connect the included wireless

antenna.

1. Connect the wireless antenna for CAM410W.

2. Connect Ethernet cable for network connection.

3. Connect power adapter to turn on the camera.

4. Set up the network configurations according to the network environment. For further

explanation, please refer to chapter 6.

5. After finish the configuration for the very first time, if you want to use wireless network,

plug out the Ethernet cable.

B. Monitor Setting

1. Right-Click on the desktop. Select [Properties]

2. Change color quality to “Highest (32bit)”.

C. IP Assignment

¾Always consult your network administrator before assigning an IP address to your

camera in order to avoid using a previously assigned IP address.

¾MAC Address: Each network camera has a unique Ethernet address (MAC address)

shown on the sticker of the camera.

¾One final note, although the IP Search is able to find and configure any network

camera on the LAN except those that are behind a router, it is a good idea to set the

host PC to the same subnet. In order to connect to the Web-based user interface of

the network camera, the host PC must be in the same subnet. For more information

about subnets, please consult your network administrator.

There are 3 kinds of IP configuration:

zFixed IP (Public IP or Virtual IP)

zDHCP (Dynamic IP)

zDial-up (PPPoE)

IP Search is a utility that provides an easier, more efficient way to configure the IP

address and network settings of the network camera. It even provides a convenient way

to set the network settings for multiple devices simultaneously. Moreover, IP Search can

save the network settings for all devices as a backup and restore them when necessary.

The software can be installed from the attached software CD.

1. Once IP Search has been successfully installed on the computer, double click the

IP Search icon on the desktop to run the software.

2. IP Search searches all the network devices which connect to the intranet and lists

on the window. Click [Search] button to search again.

3. From the list, select the device with the MAC Address that corresponds to the

device that is to be configured.

4. Click one of the network devices, the network configuration of this device will show

on the bottom.

5. After filling in the IPAddress, Subnet Mask, Gateway and the others, click [Set]

button to complete the configuration settings and save into the remote device.

6. You can assign a name to identify the camera. Type the name in “Device Name”

field, click [Save] and then click [Search] button, the name will be displayed in the

list.

7. Wait for 1 minute to let camera update the settings, and then click [Search] button

again to re-search the network devices. Click the network device listed on the

window and click [Open Web] button. It will open an IE browser and connect to this

device directly.

D. Install ActiveX Control

For the first time to view the camera video via IE, it will ask you to install the ActiveX

component.

If the installation failed, please check the security setting for the IE browser.

1. In IE, click on [Tools] Æ[Internet Options…]

2. Click on [Security] Tab Æ[Custom Level…]

3. In Security Settings, under [Download unsigned ActiveX controls], select “Enable”

or “Prompt”.

4. In Security Settings, under [Initialize and script ActiveX controls not marked as safe],

select “Enable” or “Prompt”.

5. When pop-up window with warning message, click [Yes] to save the settings.

1 2

3 4

When popup the following dialogue box, click [Yes].

Autres manuels pour CAM410

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Asoni Caméra de sécurité

Asoni

Asoni CAM413 Manuel utilisateur

Asoni

Asoni CAM737MIR Manuel utilisateur

Asoni

Asoni CAM677G Manuel utilisateur

Asoni

Asoni CAM6733F Manuel utilisateur

Asoni

Asoni CAM640 Manuel utilisateur

Asoni

Asoni CAM662H Manuel utilisateur

Asoni

Asoni CAM647 Manuel utilisateur

Asoni

Asoni CAM656D Manuel utilisateur

Asoni

Asoni CAM679F Manuel utilisateur

Asoni

Asoni CAM417-PoE Manuel utilisateur

Asoni

Asoni CAM713M Manuel utilisateur

Asoni

Asoni CAM6681F Manuel utilisateur

Asoni

Asoni CAM742F Manuel utilisateur

Asoni

Asoni CAM613M Manuel utilisateur

Asoni

Asoni CAM412 Manuel utilisateur

Asoni

Asoni CAM434 Manuel utilisateur

Asoni

Asoni CAM437 Manuel utilisateur

Asoni

Asoni CAM646M-PoE Manuel utilisateur

Asoni

Asoni CAM412 Manuel utilisateur

Asoni

Asoni CAM668F Manuel utilisateur

Asoni

Asoni CAM633 Manuel utilisateur

Asoni

Asoni CAM417 Manuel utilisateur

Asoni

Asoni CAM419 Manuel utilisateur

Asoni

Asoni CAM627M Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur