ASCOM NIS ROAD - DATASHEET 1 Manuel utilisateur
PRODUCT SHEET
Product: NIS ROAD
Segment: Traffic
NIS Road Safety wIthout compRomISe.
Achieving the maximum of safety with a
minimum of personal resources. Robust safety
concepts are essential, especially when it comes
to the construction of new motorways and
carriageways or renovations and improvements
to existing networks. With NIS Road, safety
means integrated emergency call, monitoring
and safety systems for motorways, dual
carriageways, tunnels and galleries. Ascom
designs, plans and installs comprehensive and
co-ordinated components, and optimises
existing safety facilities in the case of upgrades
and retrofits.
NIS Road connects workstations, emergency call stations and
subscribers in public networks with one another. Third-party systems such
as video systems, fire extinguishers, emergency exits, etc., are all easily
activated and monitored from the operations centres. NIS Road implements
voice and data services on a single communication network, and does so
cost-effectively since the acquisition, operation and maintenance are
limited to a single network. NIS Road is networked using the following tech-
nologies: ISDN S0, ISDN Uk0, GSM (triband), GSM-R, analogue a/b and VoIP
(copper or fibre optic). The equipment can be powered remotely and
several call stations connected to one line. This means it is possible to install
call stations that are up to 8 km away from a mains connection.
ComNode is the core of NIS Road. It can be connected via an IP network
and adapts to both small systems and large-scale installations. NIS Road
also supports Ascom system operating terminals as well as commercially
available phones. With outside call stations, motorists always have a contact
possibility. (See diagram page 3.)
PRODUCT SHEET: NIS ROAD
Alarms when it counts
NIS Road is configured using digital inputs and triggers alarms
whenever a change of state occurs. With the telecontrol module
both the visualisation and operation can be effected using the graphical
user interface of the NIS Road operating terminal or signalled to a control
system. The control systems are connected via an OPC-DA interface;
customer-specific interfaces can also be integrated without difficulty.
Radio dispatching
The radio dispatching module (TETRA, Tetrapol) expands NIS Road’s
capability to a fully fledged radio dispatcher workstation. Connected phones
or radio sets are able to communicate with one another. Media-specific
properties such as push-to-talk are also supported, as is functional
addressing.
Well managed
NIS Road is handled by a central management system. Commissioning
and maintenance are made all the more efficient by the remote
configuration and software distribution. For road works, call stations can be
remote-deactivated where necessary. The constant monitoring of the
ComNodes, transmission paths and terminals means that quick intervention
is possible if and when a fault occurs. Integrated test modules provide a
complete functional check of the entire audio path from the operating ter-
minal to the call stations, including their loudspeaker and microphone. As
it generates automatic messages to a control system or maintenance
centre, NIS Road can be seamlessly integrated into a higher-order
management system.
PRODUCT SHEET: NIS ROAD
ComNode
ISDN
PSTN / PBX
Analogue
TETRA
Tetrapol
GSM
System Operation
Control Room
Management System
Uk0 Gateway
Technicians’ Room
GSM Gateway
Radio Gateway
Alarmbox for tunnels
Emergency call point
GSM Emergency call point
The basic element of the NIS Road solution
4
PRODUCT SHEET: NIS ROAD
Ascom (Switzerland) AG Ascom (Germany) GmbH Ascom (Austria) Ges.m.b.H
Belpstrasse 37 Edisonstrasse 11-13 Lemböckgasse 49
3000 Bern 14 60388 Frankfurt am Main 1230 Vienna
T+ 41 31 999 11 11 T +49 6109 738 584 T +43 1 811 77 0
F + 41 31 999 16 82 F +49 6109 738 333 T +43 1 811 77 10
www.ascom.com www.ascom.com www.ascom.com
NIS is modular in structure. The various functional components can be
compiled as required and adapted precisely to suit customer
requirements.
NIS FUNCTIONS
Graphical user interface
Personal profiles
Local operation, remote operation, parallel operation
Functional addressing, roles
Authentication and location autonomy
Online busy indicator
Priority calls (emergency / information calls)
Logical destination dialling
Queue
Meet Me
Phone Book
Analogue radio (PTT)
Digital radio integration (TETRA, Tetrapol)
Telecontrol (monitoring and controlling data points)
End-to-end system monitoring (Fekon)
Control system / third-party system link-up via OPC
CCTV connection / control
Call recording
Call playback (last 100 calls per user)
SMS – Short Message Service
Voice Mail
Integration and gateway function, private or public networks (primary or basic rate
accesses), ISDN or analogue telephony, VoIP (SIP based)
System can be implemented with a redundant configuration
Management / maintenance components
11.2007 © Ascom (Switzerland) AG
Ce manuel convient aux modèles suivants
1
Autres manuels ASCOM Matériel réseau
ASCOM
ASCOM TEMS SYMPHONY SUITE Manuel utilisateur
ASCOM
ASCOM TEMS SYMPHONY Manuel utilisateur
ASCOM
ASCOM OLTU Manuel utilisateur
ASCOM
ASCOM OPENACCESS NODE Manuel utilisateur
ASCOM
ASCOM DIGISTAT Manuel utilisateur
ASCOM
ASCOM TEMS SYMPHONY SUITE - BROCHURE 2 Manuel utilisateur
ASCOM
ASCOM VOWIFI SYSTEM - Guide de l'utilisateur
ASCOM
ASCOM NU Series Manuel utilisateur
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
