ARTHUR HOLM DynamicVision Manuel utilisateur
User Guide
Danish craftmanship
Mediterranean soul
Technology Serving Desing
DynamicVision
Motorised wall mount for video conference cameras
TABLE OF CONTENTS
EC REGULATIONS AND SECURITY 6
SAFETY INSTRUCTIONS 6
SYSTEM DESCRIPTION 8
INSTALLATION 10
INPUT CONNECTORS 12
CONTROLS 13
AHNET PROTOCOL 14
INFORMATION ON DISPOSAL 16
WARRANTY TERMS AND CONDITIONS 17
WELCOME
Thank you for purchasing an ARTHUR HOLM product.
Our product range has been designed for a seamless integration and for
a maximum reliability.
Please, read this installation and operating instructions carefully and keep
them in a safe place for future reference.
We remain at your entire disposal if you have any suggestions that would
help us improve our products.
Henrik Holm
General Manager
ABOUT US
The Company
Arthur Holm has its origins in the Danish furniture designer Jorgen Alex
Jensen, who was active during the sixties and the seventies. His design
inspiration and his concept of ergonomics have been continued by his
family, who is the design force behind Arthur Holm product range. The
result of combining Scandinavian design tradition with Mediterranean
creativity, exibility and emotion is a wide product range built on more
than 25 years of craftsmanship.
Arthur Holm offers a professional product range where tomorrow’s
technology is shaped into valued materials with design exibility and
customisation, specially created to enhance communication in reception,
collaboration, conference and meeting areas.
The art of customisation
Arthur Holm offers a range of ingenious products whose designs are based
on quality materials and the latest technology. Products which endow
meeting and conference rooms with silent, ergonomic, innovative and
aesthetic solutions that integrate into the furniture, hang from the walls as
works of art or are used as interactive points of information.
The world of Arthur Holm
Arthur Holm offers a selection of unique, elegant, versatile, exible and
ergonomic products that are being used in meeting and conference
rooms, reception areas, huddle rooms, control rooms, auditoriums and
public zones of leading companies throughout the world.
The numbers speak for themselves! We currently own 33 product patents,
have presence in over 45 countries with products and solutions inmore
than 25,000 installations.
It will be our pleasure to work with you, designing your unique and
personalised environment. Our broadcast electronic engineers will
provide the latest technology while our design team will offer you the most
exclusive appearance.
Our team puts its heart, passion and pride in all our designs.
6
SAFETY INSTRUCTIONS
Plugs
• Do not dismantle any part of the device's power connector.
• Disconnect the power plug from the AC outlet when the device is not
going to be used for an indenite period of time.
Power and extensions cords
• Use the appropriate power cord with the correct plug type.
• Do not overload wall outlets or power cords.
• Make sure the total ampere passed through an extension cord does not
exceed the maximum allowed by the cable used.
• Do not place anything on the power cord.
• Do not locate this product where a person may walk or trip over the
cord.
EC REGULATIONS AND SECURITY
ATTENTION: Do not disassemble or modify the device in any way.
This symbol warns of the presence of dangerous un-insulated
voltages inside some of the components, of sufcient magnitude
to expose people to risk of electronic shock.
This symbol draws attention to important use and maintenance
instructions in the manual that accompanies the unit.
This symbol indicates that the equipment conforms to the norms
established by the European Community.
This symbol indicates the power supply.
7
Wiring connected to hazardous voltage requires installation by
qualied personnel or the use of ready-made exible cables.
For your security, your equipment must be connected to an
electrical outlet with grounding connection protection.
Since the plug is used to disconnect the device, the operating
electrical outlet must be in an easily accessible place.
Environment
• Install the equipment on vertical surface.
• Install the equipment in a ventilated area.
• Avoid exposing the equipment to:
∙Rain or water
∙Excessive heat, cold or humidity
∙Area exposed to direct sunlight
∙Dirty areas
∙Equipment generating strong magnetic elds
• Avoid placing open containers of liquid, near the equipment.
• To prevent damage the equipment must be rmly anchored to the
surface, as shown on the installation instructions.
SAFETY INSTRUCTIONS
8
SYSTEM DESCRIPTION
Applications
DynamicVision is an efcient motorised solution to hide videoconference
cameras while improving the overall room design. The DynamicVision is
designed to be adapted to the room décor. Its mounting system allows
for the mounting of fabric of your choice onsite. The DynamicVision can
also be veneered with a maximum veneer load of 2.5 kg / 5.5 lbs. The
camera enclosure is controllable through RS-422 (AHnet), Infrared or
AHlink.
DynamicVision provides the ideal solution to conceal videoconference
cameras while improving the interior design of the conference room with
its easily adaptable front enclosure that can be covered with various
materials. The pre-installation frame is the perfect solution to coordinate
between system integrators, architects or constructors. The camera
enclosure is activated via RS-422, infrared or AHlink when needed. It
neatly stores the camera away when not required, both protecting
the camera and securing the work environment. The front enclosure
moves vertically to expose the camera, while simultaneously moving
the camera forward to free the camera lines from the enclosure.
DynamicVision is the perfect solution for system integrators, architects,
interior designers and space planners.
Designed for
wall integration
9
Features
• Motorised wall mount for videoconference cameras.
• Compatible with most popular videoconference cameras.
• Cover for veneering.
• RS-422 and Infrared controllable.
• Easy to install.
Models
AHDV01
Motorised camera wall mount enclosure for videoconference cameras.
Upward moving cover. Controls: AHlink, AHnet, RS-422 and Infrared
remote control.
AHDV02
Motorised camera wall mount enclosure for videoconference cameras.
Downward moving cover. Controls: AHlink, AHnet, RS-422 and Infrared
remote control.
Box Contents
Before the installation of your retractable system, please check the
contents of the shipping box, it must contain the following items:
• Motorised lift system
• Power cord
• Remote control
• Power supply 100-240Vac, 50-60Hz. Output 12V
• User Manual
Important note: This device can only work with the power supply
included in the shipping box. This power supply can not be replaced by
any other rather than the original one.
SYSTEM DESCRIPTION
10
INSTALLATION
Support wall mounting
DynamicVision is designed to be mount on any wall. Installation is
extremely simple:
• Attach the enclosure into the hole previously made. Use suitable
hardware in the 4 holes.
• Once the system connections are done, match the front cover to the
enclosure, clipping in the pressure staples. Then, press until they clip.
Table des matières
Autres manuels ARTHUR HOLM Support et étagère
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
