ARPENKIN Mini0801S Manuel utilisateur
1
Mini0801S Mini0805
User Manual
2
Please read this manual carefully before using this product.
Please keep this manual for future reference.
V1.0
PRECAUTIONS
Please kindly take special note of the following before using your new
Dash Camera.
1. Remove the protective film from the lens.
2. Format the Micro SD card and format it again on the camera after a period of time use because
there may have some file segment(If you are using Micro SD card larger than 32GB, please
format the cards on a computer to be FAT32 format)
3. Use the original car charger and hard wire kit provided.
4. Long press “UP” on the roller button to enter and adjust the menu settings.
5. Rotate the camera to right angle and fixed on the car windshield.
6. After operating for some time the camera surface will become hot, this is normal operation,
and no need for concern. Take additional care when touching your camera after long periods of
operation.
7.3M sticker mount design makes your DVR more safer, prevent it fall of on that bump;
8 .Over temperature protection for parking guard.
Because extreme temperatures will cause damage to the camera, the smart temperature
adjustment within the camera will react when the parking guard function is in operation.
When inner temperature reaches 85°C(185F), the camera will power off and stop record
automatically.
3
9.Car battery voltage protection for parking guard.
If car battery voltage falls below 11.5V, camera cannot receive power from the car
battery and camera will be turned off automatically, Parking Guard function will not work
at the same time, to ensure the car engine will start normally.
10.Built-in super capacitor battery operates only for a short duration.
The built-in super capacitor can provide 6 seconds of working time in order to save files before
powering off .The battery will be recharged automatically once input power is reconnected.
The camera will not power on without an external power supply connected.
For additional operating instructions, please read the manual thoroughly before use.
1. Do not expose the camera to moisture, dusty, dirty or sandy conditions. Exposing the
camera or the lens to these conditions can damage the camera and its components.
2. Do not expose the camera to high temperatures.
The normal operating temperature of the camera is 0℃to 40℃(32F to 104F).
High temperatures can shorten the life span of electronic devices, and extremely high
4
temperatures will shorten the super capacitor life and/or degrade the plastic components.
Note extreme temperatures can be achieved in parked cars in direct sunlight. Exposing
the dash camera to strong sunlight when using Motion Detection mode may cause the
camera to malfunction or become damaged as the temperature can be too high in your
car in summer or during high temperature conditions.
3. Do not expose the camera to cold environment.
Extremely low temperatures can damage electronic components; if there is water or
moisture in cold environments, freezing water can cause damage, as thawing. Do not
attempt to dismantle or open the casing. Doing so may result in electrical shock and will
most likely result in irreparable damage to the camera.
4. Do not mistreat the camera, dropping, sudden impact, and vibration can cause
damage to the camera.
5. Do not clean the camera with chemicals, cleaning solution or detergents. Only a slightly
damp cloth should be used.
6. Before using the camera, please format the memory cards in the camera or computer
to avoid potential camera or card malfunction. Memory cards also need to be formatted
regularly to avoid potential camera or card malfunctioning.
7. There may be a layer of plastic film on the LCD screen and the lens, this is intended to
prevent any scratching during transportation. Please remove the protective film from the
lens before using.
8. The camera uses a built-in super capacitor to get power from the car, due to this the
start up time may be a little longer (about 10 seconds). On the first occasion when
connected to a computer. The camera may not connect with the computer or the computer
may not detect a USB flash. This is normal in the first time instance. If this occurs please
remove the plug and then re-plug USB cable to the computer. This will resolve the issue.
5
9. The camera will start to record automatically once the car engine is started.
10. Please set the time zone, date and time correctly before using camera.
ACCESSORIES
Before using this product, please make sure that your camera package consists of all the
following items. Please contact the distributor in case of any missing components.
Name
Quantity
Name
Quantity
Camera
1 piece
Car Charger
1 pieces
USB cable
1 piece
Double side tape
2 pieces
Cable Clip
1 bag (6 pieces)
User Manual
1 piece
Static sticker
2 pieces
Lens Cleaning Cloth
1 piece
Gift box
1 piece
GPS (inside mount)
optional
GPU (mount)
optional
CPL filter
optional
Hardwire kit
optional
Methods of pasting the static sticker:
1. Spray a small amount of water on the place on your windscreen where the static
sticker will be pasted, then use a dry towel to clean it;
2. Tear off the static sticker, and then paste it to the correct position.
3. After you have adjusted the location well, you can use a scratch board or a similar flat
item to stick the static sticker in place and squeeze the water inside out until there is
no bubbles or water between the static and the glass.
6
4. Then place the GPS/GPU mount onto the static sticker, then if you need to remove the
bracket, it is easy, just remove the static sticker from windscreen.
CPL filter
Reduce the reflection from shiny surface like vegetation, sweaty skin, water surface, glass,
road, and let the natural color come through at the same time.
Some of the light coming from the sky is also polarized to give a more dramatic sky and
high contrast clouds, rendering outdoor scenes crisper with deeper color tones.
APPEARANCE
7
1. Bracket, double side tape stick on here.
(if have GPS function, GPS logger is inside the bracket)
2. Micro USB port 1
3. AV port
4. Up / Menu / Mute button
5. OK button
6. Down / Playback / SOS button
7. LED light indicator
8. Lens
9. Micro USB port 2
8
10. Power on / off, Screen on / off button
11. HDMI port
12. Micro SD card slot
13.Rotating angle parts(90 degree)
SPECIFICATION
AIT8328P chipset ; also named MSC8328P (MSTAR)
Mini0805P: OV4689 sensor
Mini0801S: OV2710 sensor
1.5inch TFT LCD screen
Resolution: Mini0805P 2304X1296 30fps 1920*1080 30fps
1920*1080 30fps HDR 1280*720 30fps
1280*720 60fps
Resolution: Mini0801S 1920*1080 30fps 1920*1080 30fps HDR
1280*720 30fps 1280*720 60fps
Built-in microphone / speaker
Built-in super capacitor
Support HDMI output
Support G-sensor file protection
Support SOS manual file protection
Support GPS trace logging
Support micro SD card up to 64GB
9
Support parking guard (with hardwire kit, optional)
OPERATION
Read this chapter to learn how to operate the camera.
Turn on / off camera
This camera does not have an internal battery, it utilizes a super capacitor, so it must be
continually connected with the power supply when using.
When connected with the power source, the camera will automatically turn on. If no power
source, camera will automatically turn off very soon.
When the camera is recording or in standby, user can long press POWER button to turn
off the camera.
Recording Video
When the camera is in standby, short press OK button to start video recording; short press
OK button again to cancel video recording.
The camera is also pre-configured to auto start recording once it receives power, i.e. when
the car engine is started.
The camera is also pre-configured to auto stop recording and turn off once it loses power,
i.e. when the car engine is stopped.
Take Photo
When camera is recording, long press OK button to take a photo.
When camera is in standby, long press DOWN button (one time) to enter photo mode,
short press OK button to take a photo. here you can use UP and DOWN buttons to set the
focus length to magnify or shrink the image.
Options:1.0x to 4.0x.
1
0
Storage card preparation
The camera supports micro SD card up to 64GB maximum.
It is recommended to use high speed micro SD card to avoid storage problems.
Please format the SD card before recording.
It’s suggested to formate the card every two weeks to avoid file segments which may
cause recording problem.
Please backup the important files before formatting.
Recording Mute Video
When the camera is recording or in standby, you can short press UP button to mute the
microphone inside camera at any time; short press UP button again to cancel mute status.
SOS Manual Protect Video
The camera supports automatic loop recording which means the oldest video will be
over-written by new video when the card is almost full unless the video is protected (read
only file attribute).
The camera can auto protect videos if the G-sensor data exceeds the configured
threshold.
You can also manually protect the videos by short press DOWN button (SOS) when
recording, “Lock current file”, there will be one yellow lock on the left bottom of screen;
press DOWN button again to cancel protected status, “unlock files”.
If any impact over the threshold value is detected, the current recording video will be
locked automatically.
User can lock/unlocked the videos in playback mode.
Power off Screen
When camera is in standby or recording, you can short press POWER button to turn off
Ce manuel convient aux modèles suivants
1
Table des matières
