AromaPlan DAP-102NP Manuel utilisateur

PRODUCT

MANUAL

AromaPlan scent diffusers are powerful, easy to use and the most silent devices

available. Our innovative technology converts the liquid perfume into dry vaporous

microparticles, creating a practically invisible mist that drifts evenly throughout any

space.

For example, when a candle burns, its perfume is stronger the closer you get.

Our devices are different. A space is scented evenly, regardless of where you are.

Our devices are perfect for scenting any setting, controlling foul odors and improving

the quality of indoor air in business and home environments.

With AromaPlan’s diffuser you have ultimate control. You can schedule the strength

of the fragrance as well as when it will automatically turn on and off, to perfectly scent

your environment according to your daily needs, without ever wasting your favorite

fragrance.

Features:

• Easy oor or wall installation.

• Space evenly scented.

• No Residue.

• Safe for Kids & Pets

• Physical diffusion without

heating and water.

• Automatic scheduling on/off

according to your daily needs.

• Ultracold mist.

• Microparticles permit immediate and

even diffusion for lasting results.

• Automatic mode.

• Easily control fragrance concentration.

Attached Warranty Card

Please keep the Instruction and the warranty

card carefully for further reference.

Please read all instructions before using the machine.

NO FLAME NO RESIDUE ECO-FRIENDLY PET-FRIENDLY

White Diffuser

DAP-101NP

Avoid casualties and property loss, please always follow

the attentions as the following.

(The following basic safety precautions

should be always complied with)

I.Cautions

WARNING

May cause electric shock

or re hazard.

NOTE

May cause personal injury

or property damage

INSTALLING

1.Do not use unsafe plug or power.

2.Do not install the device at the

place where children can touch.

3.Do not install the device at the

place where can not bear strength

and prone result in falling and

collapsing.

4.Do not tilt the device.

5.Keep the device away from re

and heat source, prohibit to store

ammable and explosive materials

around the device.

6.Except for the atomizer, the housing

material is not resistant to corrosion.

7.Do not use device in high tem-

perature or wet environment.

8.Do not use inammable, explosive,

corrosive and other hazardous sol-

vents work with the device.

INSTALLING

1.Ensure the rmness of installation

area.

2.Install the device in a ventilative

and adequate space.

3.Do not block the sprayer by hand

or other obstructions when the de-

vice is working.

4.Do not spill water or conductive,

corrosive liquid on the device sur-

face or fall inside of the device.

5.Do not operate device without

stopping. Suggested average daily

usage time should not exceed 14

hours, and the third level is recom-

mended.

6.Cut off the power in extreme

weather environment.

PROHIBITION NECESSARY

Parameter

Model: PRO300

Voltage: 12V

Power: 7.5W

Capacity: 300ml

Weight: 0.9KG

Coverage: 300~400m³

Size: 170(L)X80.5(W)X206(H)mm

Atomizer

One-time

inner stopper

Nozzle

170mm

80.5mm

206mm

Fragrance

oil bottle

II.Specification

ATTENTION

The screws are optional parts for

xing the equipment on walls and

the air conditioning tube is optional,

if it is of interest to the user, it is

necessary to contact via e-mail

for more information and guidance

on the installation process.

III.Instruction

Approved Certicate: CE, FCC, RoHS, CNAS and so on.

Application Place: Brand clothing store, 4S shop, bar, clubhouse and so on.

1. APP Operation Introduction

The device has four buttons :

“ ” is the return button

“ ” is the conrmation button,

“ ” is the increasing button

and “ ” is the shift button.

IV.How to use

the equipament

V.Operation

Introduction

NORMAL WORKING INTERFACE

2. Buttons operation:

The device has four buttons:

1.Under the normal working interface, press “ ” and “ ” buttons at

the same time to enter the password setting interface.

2.Under the normal working interface, press “ ” and “ ” buttons at

the same time to turn on/off the essential oil detection function.

3.Under the normal working interface, press “ ” button to adjust the

concentration level A, B and C.

4.Under the normal working interface, press “ ” and “ ” buttons at

the same time to enter local time setting interface.

5.Under the normal working interface, press “ ” button to enter the

working time and frequency setting interface.

6.Under the normal working interface, long press “ ” button to

turn on/off the fan.

7.Under the normal working interface, long press “ ” button to

turn off the machine.

3. Factory Reset:

Under the normal working interface, rstly, press the “ ” and “ ”

buttons at the same time until the interface shows YES/NO, then let your

hand go. Secondly, operate “ ” button to choose YES then press “ ”

button to conrm it and nish the setting.

4. Congure your diffuser

1.Programming Date/Time:

Programming your AromaPlan diffuser

updating the date and time is very simple.

After plugging in your machine you’re

going to press “ ” and “ ” buttons

at the same time to update the time in a

24-hour format you’re rst going to click

the button “ ” in order to adjust the

hour and then you’ll go to the button

“ ” to update the minutes.

DATE/TIME INTERFACE

Now we can begin adjusting the diffusers Start Time (St) by clicking “ ”,

we’ll change the hour and we can click “ ” in order to change the minutes

we will then click the “ ” again in order to move to the end time.

Programming working intervals

Once we have nished setting up the hours, now we are going to adjust the

intensity of your fragrance this is done by setting up working intervals in

seconds so we’ll click “ ” after we adjust the time to come down to your

Working (W) seconds this is how long your diffuser will release fragrance,

for example so we have it set to Work, by clicking “ ” button, for 30 seconds

(30s). Then we will click the “ ” again in order to move it, so we can also

adjust the Pause (P) for resting time. We cal also ajust the Pause (P) for

resting time, so for example you can set it to pause for 90 seconds (90s) by

clicking in “ ” button.

2. Scenting schedule conguration:

Programming working hours

After conguring the date and time,

congure the scenting schedule of the

diffuser. The rst step is to program the

diffusers working hours. We will do this

by pressing “ ” in order to enter these

settings.

Once you are in the program screen

click “ ” to move from the current day

to the hour.

SCENTING SCHEDULE INTERFACE

Next, set the day of the week and the date using the same buttons as

before to congure. Clicking the “ ” button changes the item, and

the “ ” button moves you to the next item to be adjusted.

Press “ ” button to conrm it and nish the setting.

NORMAL WORKING INTERFACE

Now once we have nished setting up this

program screen we can press “ ” for

the diffuser to begin working in the

Normal Working Interface where you’ll see

the countdown of the Working (W) seconds

that you programmed and the Pause (P) for

resting seconds that you programmed.

You can programming up to ve schedules.

3. Scenting schedule conguration:

The diffuser has three different intensity

settings depending on the size of your

space once you are in the home screen

simply click “ ” and you will begin to see

the intensity changing from A, Band C.

The suggested intensity is for spaces up

to 1000 square feet use intensity A,

spaces is up to 1500 square feet use

intensity B, spaces above 1500 square

feet use intensity C and if in any case you

need more intensity for your fragrance

you’ll just hold “ ” for 5 seconds and it’ll

enter into turbo mode “ ”.

NORMAL WORKING INTERFACE

Acess the ocial video tutorial:

https://youtu.be/jw-mbckVvuQ

VIDEO TUTORIAL

VI.Accessories

and spare parts

Please clean the equipment periodically, suggest 2-3 months in 1 circle,

so that it can work under best condition.

Please cut off the power when cleaning, also do not use wet hand to

operate it directly, in case of electric shock and injury.

1. Long-term non-use

(1) Please turn off and cut off the power then roll up the power cord.

(2) Clean the lter components.

(3) Place the deodorant package which contains activated carbon in the device

or package, to prevent residual substances in the equipment produce odor.

(4) Please equip the machine with the dust cover, placed in the shade,

ventilative place.

VII.Accessories

and spare parts

NAME

Aroma diffuser

Adapter

Cap

Air conditioning tube

Key

Pneumatic ttings

1PC

2PC

1PC

NAMEQUANTITY QUANTITY

Screws

(including plastic

expansion tube)

Manual

Warranty card

Bottle sealing gasket

Mounting strip

2PC

1PC

2PC

VIII.After-sales Service

1. Provide free technical solutions and installation process guidance.

2. Provide free online FAQ consultation and scent-marketing suggestion.

IX.The equipment

warranty and precautions

1. The equipment has a 1-year warranty (from the date of purchase).

2. Please provide the warranty card,Invoice or other provement which can prove

the equipment was ordered in our company to enjoy the free maintenance.

3. The human error or other wrong operation cause the fault not belong to the

scope of warranty, and will not be accepted to provide free maintenance.

www.aromaplan.com

E-mail: support@aromaplan.com

Phone: +1 321 710-9232

WhatsApp: +1 407 312-3317

@aromaplanglobal

Autres manuels pour DAP-102NP

Table des matières

Autres manuels AromaPlan Accessoires

AromaPlan

AromaPlan DAP-102NP Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur