Arlo Arlo Go Manuel utilisateur

Arlo Go Quick Start Guide

What’s Included

Arlo Go camera

Rechargeable

battery

Power adapter

(varies by region)

Mount

Mount screws

Get the Arlo App

arlo.netgear.com

For the best experience, download the Arlo app for your smartphone by

scanning this QR code.

Insert the SIM Card

Into Your Arlo Go Camera

The camera uses a mobile network to send pictures and videos to your

Arlo account in the cloud. Before using the Arlo Go camera, you must

install a Telstra SIM card.

Note: To obtain a SIM card, contact Telstra.

To use Arlo Go, make sure that your Telstra SIM card is active, that

there is data in your account, and that any existing SIM PIN is deactivated

or disabled.

¾To insert a SIM card:

1. Unlock the battery compartment by

pressing and holding the latch.

2. Gently pull the battery door back to

open the compartment.

3. Align the gold SIM contacts.

4. Insert the SIM card into the SIM card

slot.

SD card slot

SIM card slot

Insert the Battery

Into Your Arlo Go Camera

If power is available, you can plug your camera in and use it in powered

mode. We recommend that you insert the battery into your Arlo Go

camera even if you plan to power the camera using the power adapter.

¾To insert the battery:

1. Unlock the battery compartment by pressing and holding the

latch.

2. Gently pull the battery door back to open the compartment.

3. If you plan to store video recordings on an

SD card, insert the SD card now.

The camera comes with an SD card slot

that supports SD cards (sold separately)

with a capacity of up to 32 GB of storage.

If you inserted an SD card and your camera

is oine, the camera recordings are stored

on the SD card.

Note: You must insert the SD card before powering

the camera on.

4. Align the battery contacts.

5. Insert the battery.

6. Close the battery door.

SD card slot

Use the Arlo app and your Arlo account to set up your Arlo Go camera. If

you already set up an Arlo account, you can add the Arlo Go camera to

your account.

During setup, your Arlo Go camera must be connected to the Telstra

mobile network.

Note: This requires that you are using a compatible device and that you

subscribe to a Telstra mobile data plan.

After you add your Arlo Go camera to your Arlo account, you can place

the Arlo Go camera anywhere in the Telstra mobile network coverage

area.

For information about optimizing mobile connectivity, scan this QR code

or visit http://tinyurl.com/jyoysqo.

Set Up Your Arlo Go Camera

¾To create a new Arlo account:

1. Launch the Arlo app from your smartphone, tap New to Arlo?

and select Arlo Go.

If you are using a computer, visit arlo.netgear.com.

Note: If you see a message indicating that

your mobile connection is not active,

you might need to edit the APN.

For information about viewing and

editing APNs, refer to the Arlo Go

user manual.

2. Follow the onscreen instructions.

¾To add an Arlo Go camera to an existing Arlo account:

1. If you already set up an Arlo account, log in, and click or tap Add

Device.

2. Follow the onscreen instructions.

1110

Place Your Camera.

¾To mount the camera on a wall:

1. Place the wall plate and secure it with three screws.

If you’re mounting the camera to plasterboard, be sure to use

the included plastic wall anchors.

2. Attach the camera to the wall plate.

You can place your camera on a ﬂat surface or mount it.

1312

The Arlo Go battery is partially charged when it leaves the factory.

¾To recharge the battery:

1. Connect the power adapter to the camera.

Caution: You must use an Arlo Go power adapter to charge the

battery. Do not try to power the camera or charge the battery

with any power adapter other than the one provided with the

Arlo Go camera.

2. Plug the power adapter into an electrical outlet.

The camera LED lights solid blue for two seconds when the

camera battery is fully charged.

Charge Your Arlo Go Battery

The Arlo Go camera is designed to connect to the Telstra mobile network.

Connecting to the camera through the cloud requires that you are using

a compatible device and that your Internet connection is active. Coverage

and service are not available everywhere.

During setup, the Arlo app uses the Telstra mobile network to ﬁnd your

Arlo Go camera so that you can add the camera to your Arlo account.

After setup, the Arlo Go camera uses the Telstra mobile network to send

recordings to the cloud storage associated with your Arlo account.

Arlo Go Access and Cloud Storage

1514

Congratulations! Your Arlo Go camera is set up and ready to go.

To view useful tutorial videos, ﬁnd troubleshooting tips, or get support,

visit support.arlo.com or contact your local Telstra representative.

You’re Done!

Solid amber

No SIM card is inserted

or the SIM card is

damaged.

Fast blinking amber

The camera is damaged

or not active.

For more information,

visit http://tinyurl.com/

h8csb5a or scan this

QR code:

Very slow blinking

blue

The camera is powering

on.

Slow blinking blue

The camera is ready to

scan the QR code.

Fast blinking blue

The camera is

connected to the cloud.

Slow blinking amber

Mobile network

coverage is not

available.

Blinking amber and

purple

The SD card type is

invalid.

Camera LED Guide

Blinking blue and

purple

The camera is

connecting to the

network and the cloud.

Blinking amber and

blue

The camera is receiving

a ﬁrmware upgrade.

Compliance

Declaration of conformity - speciﬁc absorption rate (SAR). Your device is designed to

be used at least 20 cm from the body. We declare that the product detailed in this manual,

and in combination wtih our accessories, conforms with the essential requirements of the

Radio Communications Standard (Electromagnetic IC Radiation-Human Exposure) 2003 and

the Australian Communications and Media Authority Section 376 of the Telecommunications

Act 1997 when used at a distance of not less than 20 cm from the body.

For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.

350 East Plumeria Drive

San Jose, CA 95134 USA

July 2017

Autres manuels pour Arlo Go

Table des matières

Autres manuels Arlo Caméra de sécurité

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur