Arlo Arlo Go Manuel utilisateur

1

Arlo Go Quick Start Guide

3

What’s in the box

Arlo Go camera Rechargeable

battery

Mount and screws Synthetic

grease

Arlo Go

USB port cap

Arlo Go

wind bracket

Outdoor power adapter

(varies by region)

4

Your mobile network access

A Verizon SIM card comes with your Arlo Go camera. The SIM card is

installed and activated by Verizon Wireless.

Your Arlo Go camera uses the mobile network during setup and to send

recordings to your Arlo account in the cloud.

Consider the following mobile network support options:

My Verizon. Manage your account, track your usage, edit account

information, pay your bill and more at verizonwireless.com/MyVerizon or

with the My Verizon app on your mobile device.

Customer service. Call (800) 922-0204. Follow us at @VZWSupport.

Documentation. Download the User Manual from

verizonwireless.com/support/phones-and-devices/.

5

Insert your SIM card

The Arlo Go camera comes with a Verizon SIM card installed. If a SIM card

is not installed, insert a card into the SIM card slot.

1. Unlock the Arlo Go battery compartment by pressing and holding

the latch.

2. Gently pull the battery door back to open the compartment.

3. Align the gold SIM contacts.

4. Insert the SIM card into the SIM card slot.

6

Insert the battery

1. Unlock the battery compartment by pressing and holding the

latch.

2. Gently pull the battery door back to open the compartment.

3. If you plan to store video recordings on an SD card, insert the SD

card now.

4. Align the battery contacts.

5. Insert the battery.

6. Close the battery door.

7

Get the app

Download the free Arlo app to get started.

The app guides you through installation.

8

Mount your camera

1. Place the wall plate and secure it with three screws.

2. Attach the camera to the wall plate.

If you’re mounting the camera to drywall, be sure to use the

included plastic drywall anchors.

9

If you’re plugging in the camera outdoors

Pay attention to the weather and to power outlet safety considerations:

• You must use an Arlo Go outdoor

power adapter. Do not use any other

power adapter.

• Install the the wind bracket for

support between the camera and the

power adapter.

• Connect the Arlo Go outdoor power

adapter only to a weatherproof power

outlet.

10

Install the wind bracket

1. Remove the USB port cap from the camera by pulling ﬁrmly on

the cap.

2. Slide the wind bracket onto the power adapter cable.

3. Apply a thin layer of synthetic grease around the cable

connector end.

4. Connect the cable connector to the USB port on your camera

and press in ﬁrmly.

Extra USB port caps

are included so that

you can use the camera

wire-free later.

Autres manuels pour Arlo Go

5

Table des matières

Autres manuels Arlo Caméra de sécurité

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur