Aristel SD-902 Manuel utilisateur

Quick Guide for SD-902 Door phone Intercom

Overview

This document describes the features of Door phone Intercom (SD-902) and

uses several examples to illustrate its settings.

Pre-Requisites

SN-902 V2 Base

SN-902 V2 Handset (HS) with new firmware which supports the SD902

SD-902 intercom

Feature List

Works with SN-902 v2 SPK handset, base and land line.

Supports either two way intercom (Intercom to handset) or land

line call via the base unit.

Outgoing call from DS: calls up to 3 numbers

Incoming call to DS: programmable auto-answer mode

Accepts 2 to 4-digits code to control the door relay

Stores 90 numbers on authorized guest list: if caller ID matches

the pre-stored number in the phone book, the DS will open the

door/gate automatically without inputting the password.

Option 1: Setting DS by DS Main Menu

3 sets of phone numbers for outgoing calls: Via MENU, 1, 5, PSTN

90 sets of authorized guests for incoming call: Via MENU,2 →PhoneBook

Menu for DS: Menu →1. KeyGuard → DoorPhone

Item

Description

Default Value

Ring Timeout

Outgoing call from DS. Setting the

ring timeout after pushing the “Call”

button.

35 seconds. (Range: 15~ 254)

Unlock Code

Setting 2 to 4-digit code of opening

door. 1 digit access not supported.

****

Auto-Answer

This function will be enabled always

for setting DS from HS directly.

Relay Timer

Setting the relay duration.

2 seconds.

(Range: 1~15)

Call Mode

Selecting destination (telephone/HS)

to answer the call from DS.

PSTN/HSID: 13

(HSID Range: 11~19, 21~29,

31~39, 41~49)

Table 1: The Descriptions of DS items

-Menu for DS – You can see the menu from DS (menu →1)

Menu →1. DoorPhone

Figure 1: The Menu of DS

1. Ring Time Out

You can enter the value of ring timeout (15~254 seconds) here, and if you

enter an invalid value and it will revert to the previous valid value stored.

Figure 2: Setting Ring Timeout

2. Unlock Code

You can enter a 2 to 4-digits code (it can be composited by 0~9 and *) here,

and the length of code must be 2 to 4 digits.

Figure 3: Setting Code of Opening Door

3. Auto-Answer

It is enabled always for the feature that can set DS by cordless HS.

4. Relay Timer

You can enter the value of relay duration to control the relay of DS, and if

you enter an invalid value and it will revert to the previous valid value stored.

Figure 4: Setting Relay Duration

5. Call Mode

You can select a HS or telephone here for answering the call from DS.

-PSTN: Just save and DO NOT FORGET to set telephone number or nothing

will happen when pushing the “Call” button. You can follow the steps as

Figure 5 to set the number and you can enter 3 sets of number to DS.

Figure 5: Setting Call Mode (PSTN).

-INTERCOM: Press up/down key, you will see INTERCOM and can set HS ID

after pressing ‘NEXT’, if you enter an invalid ID and it will revert to the ID

stored before. Please note that if you choose PSTN and save, the HS ID

will be reset to default ID.

Figure 6: Setting Call Mode (HS). Figure 7: Setting HS ID.

-After DS Setting

You must power cycle the DS off/on, in order for any change to take effect

Option 2: Setting DS by cordless HS

You have to know the ID of DS before setting this way.

These functions can be set using HS11 and HS12.

There is a programing menu for setting DS.

You can explore the KEY MAP of HS (see Figure 8) first before setting.

Figure 8

You should understand the setting flow of the HS and can reference Figure

9. If you want to leave the programing menu, press the END key anywhere

and it will return to IDLE state of HS.

Figure 9: The flow of programing menu.

Item

Description

Call Mode

There are two modes for DS, one is INT mode and the other

is PSTN mode. You can refer the section ‘Call Mode’ to fully

understand it.

Indication HS ID

In INT mode, a HS ID will be assigned to DS and the HS will

ring when DS ‘Call’ button is pressed. You can see the

section ‘Call Mode’ to fully understand it .

Code

Enter the code to open the door. See section ‘Unlock Code’.

Speaker Volume

The volume of DS and the default value is 3.

Dial Out Nmber1

In PSTN mode, the telephone will ring when pushing ‘Call’

button of DS and you should store the ‘Dial Out Number’ in

advance. See section ‘Call Mode’.

Dial Out Nmber2

It is the same as the item ‘Dial Out Number1’.

Dial Out Nmber3

It is the same as the item ‘Dial Out Number1’.

Ring Timeout

See ‘Ring Time Out’.

Relay Timer

See ‘Relay Timer’.

Guest List

Enable/disable the guest list. When you enable it, the guest,

whose number is in your guest list, will cause the door /gate

to open automatically when he/she makes a call to the DS.

Table 2: The Descriptions of Programing Menu Items.

-Push the call button to register

Try the easy way to register your DS, just follow the steps listed below:

1. Using the admin HS (The ID is 11 or 12) to assign an ID for DS

A. Menu →9.System

B. Enter Base ID for entering the System menu, in our case, the ID is 10.

C. After entering the menu, go to the item ‘4.Assign HS’.

D. Assign an ID you want for DS.

2. Long press the REGISTER KEY of BASE until in register mode.

3. Long press the CALL BUTTON of DS and power it on and it will be registered

to the base automatically.

-HS To DS – You can set DS by HS directly

We provide another convenient way to modify DS mode, code, speaker

volume…etc. You have to know the ID of your DS before setting. For example, a user

wants to modify the DS mode to INT mode and he/she will make an intercom call to

DS, and press the RIGHT key, the HS will show the user the option of mode

(INTERCOM:0, PSTN:2) and press key ‘0’. After setting, the DS mode will be changed

to mode INT automatically.

The following section will show you the setting steps of ‘HS to DS’.

Call Mode

Steps:

1. Press the ‘INTERCOM’ key and enter the ID of DS.

2. Press the ‘RIGHT’ key until you see the options of changing DS mode (see

Figure 10)

3. Press ‘0’ or ‘2’ to change the mode you want.

Figure 10

Indication HS ID

Steps:

1. Press the ‘INTERCOM’ key and enter the ID of DS.

2. Press the RIGHT key until the HS show you the string ‘IND HS ID’ such as

Figure 11.

3. Enter the indication HS ID you want, and note that you can’t enter the DS’ ID.

Figure 11

Code

Steps:

1. Press Key ‘INTERCOM’ and enter the ID of DS.

2. Press the RIGHT key until the HS shows you the string ‘ENTER NEW CODE’

such as Figure 12.

3. Enter the new code of opening door.

Figure 12

Note:

The code can be a 2 to 4-digits, and if you want to use a 2 or 3-digits to be your

code, you should enter ‘#’ to tell the DS the completion of changing code. For

instance: You want to use ‘11’ be your code, you should type ‘11#’.

Speaker Volume

Steps:

1. Press Key ‘INTERCOM’ and enter the ID of DS.

2. Press the RIGHT key until the HS show you the string ‘VOLUME: 1-6’ such as

Figure 13.

3. Press the value to change the volume you want.

Figure 13

Dial Out Numbers 1/2/3:

Steps:

1. Press Key ‘INTERCOM’ and enter the ID of DS.

2. Press the RIGHT key until the HS show you the string ‘DIAL OUT NUM1’/‘DIAL

OUT NUM2’/‘DIAL OUT NUM3’ such as Figure 14/15/16.

3. Enter the number you want.

Figure 14 Figure 15 Figure 16

Note:

1. The MAX length of dial out number is 16.

2. The number can be composed by 0 to 9 and ‘*’ just.

3. If your number’s length is smaller than 16, you should type ‘#’ to tell DS the

procedure is done. For example: your number is ‘123456789’ and you should

type ‘123456789#’.

4. You can type ‘#’ only to clear it.

Ring Timeout

Steps:

1. Press Key ‘INTERCOM’ and enter the ID of DS.

2. Press the RIGHT key until the HS show you the string ‘RING TIMEOUT’ such as

Figure 18.

3. Enter the value of timeout you want.

Figure 18

Note:

1. The value of ‘RING TIMEOUT’ should be 16 to 254.

2. If you want to complete the setting, you can type ‘#’.

3. It will become default value when you type ‘#’ only.

Relay Timer

Steps:

1. Press Key ‘INTERCOM’ and enter the ID of DS.

2. Press the RIGHT key until the HS show you the string ‘RELAY TIMER’ such as

Figure 19.

3. Enter the value of relay timer you want.

Figure 19

Note:

1. The value of ‘RELAY TIMER’ should be 1 to 15.

2. If you want to complete the setting, you can type ‘#’.

3. It will become default value when you type ‘# only’

Guest List

Steps:

1. Press Key ‘INTERCOM’ and enter the ID of DS.

2. Press the RIGHT key until the HS show you the string ‘RELAY TIMER’ such as

Figure 20.

3. Enter the value of relay timer you want.

Figure 20

Table des matières

Autres manuels Aristel Système d'interphone

Aristel

Aristel AN1808-12S Manuel utilisateur

Aristel

Aristel AN1104 Manuel utilisateur

Aristel

Aristel AN1104 Manuel utilisateur

Aristel

Aristel AN1808-12M Manuel utilisateur

Aristel

Aristel DS902 Manuel utilisateur

Aristel

Aristel AN1404 Manuel utilisateur

Aristel

Aristel AN1603-01 Manuel utilisateur

Aristel

Aristel AN1808-08 Manuel utilisateur

Aristel

Aristel AN1808-12S Manuel utilisateur

Aristel

Aristel AN1808-12S Manuel utilisateur

Aristel

Aristel AN1804-4G Manuel utilisateur

Aristel

Aristel AN1912 Manuel utilisateur

Aristel

Aristel AN1912 Manuel utilisateur

Aristel

Aristel AN1804 Manuel utilisateur

Aristel

Aristel AN WDS Manuel utilisateur

Aristel

Aristel AN1808-08 Manuel utilisateur

Aristel

Aristel AN1204 Manuel utilisateur

Aristel

Aristel SS91A-M Manuel utilisateur

Aristel

Aristel AN1204AO-K12H-2 3G Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur