Aries 203016 Manuel utilisateur

ARIESAUTOMOTIVE.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •203016-INS-RA •PAGE 1

INSTALLATION MANUAL 203016

Parts List

1Driver / left side bar

1Passenger / right side bar

2Driver / left cradle bracket

2Passenger / right cradle bracket

8Hex bolt, M8

8Flat washer, M8

8Lock washer, M8

8Clip nut, M10

16 Hex bolt, M10

16 Large flat washer, M10

8Small flat washer, M10

16 Lock washer, M10

8Hex nut, M10

Torque Speciﬁcations

Metric

M6 bolt 3 ft-lbs.

M8 bolt 7 ft-lbs.

M10 bolt 16 ft-lbs.

M12 bolt 28 ft-lbs.

SAE

1/4" bolt 3 ft-lbs.

5/16" bolt 7 ft-lbs.

3/8" bolt 16 ft-lbs.

7/16" bolt 20 ft-lbs.

1/2" bolt 28 ft-lbs.

Use above torque setting unless otherwise noted

Tools Required

Ratchet Socket set

Torque wrench Wrench set

Level --

Level of Difﬁculty

Easy

Notes and Maintenance

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

To protect the product, wax after installing. Regular waxing is recommended

to add a protective layer over the finish. Do not use any type of polish or wax

that may contain abrasives that could damage the finish.

For polished, gloss and other smooth finishes,

polish may be used to clear small scratches and scuffs on the finish.

Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive

cleaners, abrasive pads, wire brushes or other similar products that may damage the ﬁnish.

Refer to the table to the left when securing hardware during the

installation process to help prevent damage to the product or vehicle.

Product Photo

Front

Rear

Product Registration

CURT Group stands behind our products with industry leading warranties.

You can help us continue to improve our product line and help us understand

your needs by registering your purchase by visiting:

warranty.curtgroup.com/surveys

At CURT Group, customer is king. We value your feedback and we use that information to make

improvements on our products. Please, take a minute and let us know how we are doing.

ARIESAUTOMOTIVE.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •203016-INS-RA •PAGE 2

Step 1

Starting on the driver side, locate

the two mounting locations along

the bottom edge of the vehicle.

Be sure to use a bracket with a left facing

cradle and one with a right facing cradle for

each side of the vehicle. The cradles will be

positioned so that they are facing inwards

towards the center of the vehicle.

Step 4

Place the driver-side side bar onto the

brackets and secure with four M8 bolts,

lock washers and flat washers.

Do not tighten hardware until

all fasteners have been started.

Note: The mounting holes for the side bar

that are closest to the end of the side bar

should face the front of the vehicle

Step 2

Starting at the front driver-side mounting

location, remove the tape and insert two M10

clip nuts into the rectangular hole. Align the

clip nuts over the adjacent round holes.

Place a bracket onto the vehicle and secure

the top portion with two M10 hex bolts, lock

washers and flat washers.

Snug the hardware,

but do not fully tighten.

Step 3

Finish securing the front mounting bracket

to the vehicle by inserting two M10 hex bolts

and flat washers from the bottom side of the

bracket. Secure with two M10 lock washers,

small flat washers and hex nuts on the top side.

Snug the hardware,

but do not fully tighten.

Repeat steps 2 and 3

to install the rear bracket.

ARIESAUTOMOTIVE.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •203016-INS-RA •PAGE 3

Step 5

At this time, adjust the side

bar to the desired location.

With the side bar in position,

it is recommended to tighten all

brackets to the vehicle first, followed

by the side step connections.

For recommended torque specifications,

refer to the table on page one.

Repeat steps 1 through 5

on the passenger side of vehicle.

Step 6

Congratulations on the installation

of your new ARIES 3" round side bars.

With the side bars installed,

periodic inspections should be

performed to ensure all mounting

hardware remains tight.

To protect your investment, see the

'Notes and Maintenance' section on the

second page of this instruction manual.

Autres manuels Aries Accessoires automobiles

Aries

Aries 1110310 Manuel utilisateur

Aries

Aries 2153002 Manuel utilisateur

Aries

Aries 2055130 Manuel utilisateur

Aries

Aries 2074153 Manuel utilisateur

Aries

Aries 2055117 Manuel utilisateur

Aries

Aries AL234045 Manuel utilisateur

Aries

Aries 2072101 Manuel utilisateur

Aries

Aries 2055126 Manuel utilisateur

Aries

Aries 25630AB Manuel utilisateur

Aries

Aries P35-2004 Manuel utilisateur

Aries

Aries 2164003 Manuel utilisateur

Aries

Aries 204001 Manuel utilisateur

Aries

Aries 205040 Manuel utilisateur

Aries

Aries 2156001 Manuel utilisateur

Aries

Aries 2051179 Manuel utilisateur

Aries

Aries 202020 Manuel utilisateur

Aries

Aries P3067 Manuel utilisateur

Aries

Aries 1110315 Manuel utilisateur

Aries

Aries AL239042 Manuel utilisateur

Aries

Aries 1110313 Manuel utilisateur

Aries

Aries B35-5008 Manuel utilisateur

Aries

Aries 2055122 Manuel utilisateur

Aries

Aries S224045 Manuel utilisateur

Aries

Aries 2070450 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur

Prorack

Prorack K1163 Manuel utilisateur