Argo APOLLO Manuel utilisateur

Air conditioner without outdoor unit

APOLLO

SERVICE MANUAL

I. Removing back panel

1. first remove a total of 6 screws on the left and right sides of the front shell with a

screwdriver; remove the screws fixed to the back plate.

2. pull the back plate outward by hand to ensure that the upper and lower clamps of the

front shell are detached from the back plate.

The front housing and the rear back plate

joint has the clasp, when disassembles pays

attention.

The front housing and the rear back plate

joint has the clasp, when disassembles pays

attention.

II. Removal of front housing assemblies

1. swing the guide plate to the horizontal position, remove the three screws behind the guide

plate with a screwdriver.

2. remove the 2 screws fixed on the electronic control box cover, remove the electronic

control box cover, and pull out the connected terminal for subsequent disassembly and

maintenance. .

3. slightly lift the base with the hand, pull the front shell out, the left and right sides of the

front shell and the machine left and right sides of the sheet metal joint clip to ensure that has

been detached, the front shell bottom and the machine inside the base joint clip to ensure

that has been detached, horizontal move out of the front shell, when moving out pay

attention to loosen the connection line.

III. Dismantling of electronic control components

1. remove the 2 screws of the fixing appliance box and remove the appliance box.

2. remove the screws fixing the main control PCB and remove the main control PCB.

Remove the screws that fix the PCB radiator and the electronic control box and remove the

PCB radiator.

3. remove the 2 screws on the fixed heat dissipation fan bracket and remove the

heat dissipation fan.

4. remove the screws that fix the reactor and remove the reactor.

VI. Remove the evaporator duct assembly

1. remove the screws that fix the motor press plate and remove the motor press

plate.

1. remove the screws fixed to the evaporator to the air duct assembly.

1. remove the screws fixed to the evaporator to the air duct

assembly.

Autres manuels pour APOLLO

3

Autres manuels Argo Climatiseur

Argo

Argo DAVEN PLUS Manuel utilisateur

Argo

Argo ALTEA Manuel utilisateur

Argo

Argo GUD35P1/A-S Manuel utilisateur

Argo

Argo POLIFEMO FINN Manuel utilisateur

Argo

Argo ECOLIGHT 18000 UI WIFI Manuel utilisateur

Argo

Argo Misse13DCI Manuel utilisateur

Argo

Argo ADG35PH Manuel utilisateur

Argo

Argo Softy Manuel utilisateur

Argo

Argo AWR609CL Manuel utilisateur

Argo

Argo WALL 18000 UE Manuel

Argo

Argo ULISSE ECO Manuel utilisateur

Argo

Argo AEI1G140 3PH Manuel utilisateur

Argo

Argo FCIAS8 Manuel

Argo

Argo SLIMMY Manuel utilisateur

Argo

Argo AER608SH Manuel

Argo

Argo AFSI ECO 120HL Manuel utilisateur

Argo

Argo AW22AL Manuel utilisateur

Argo

Argo snappy Manuel utilisateur

Argo

Argo AUR210CL Series Manuel

Argo

Argo AWI726HLI Manuel

Argo

Argo AEG ECO PLUS 35PIH Manuel utilisateur

Argo

Argo KENNY EVO Manuel utilisateur

Argo

Argo ECOLIGHT 9000 IU Manuel

Argo

Argo R410A Manuel utilisateur

Manuels Climatiseur populaires d'autres marques

Spheros

Spheros CC 355 Manuel utilisateur

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuel utilisateur

Panasonic

Panasonic CS-E12HKEW Manuel utilisateur

nedis

nedis ACMB1WT7 Manuel utilisateur

Samsung

Samsung AR KV Series Mode d’emploi

Daikin

Daikin FCFV50A Manuel utilisateur

Fujitsu

Fujitsu Inverter ASBA30JFC Manuel utilisateur

Toshiba

Toshiba RAS-M10SMUV-E Manuel utilisateur

Daikin

Daikin FXLQ20MAVE Manuel utilisateur

Hitachi

Hitachi RAS-E24CAK Manuel utilisateur

CIAT

CIAT Magister 2 Series Mode d’emploi

Bestron

Bestron AAC6000 Manuel utilisateur

Hisense

Hisense 7K Manuel technique

Frigidaire

Frigidaire FFRE0533S1E0 Manuel utilisateur

Samsung

Samsung AS09HM3N Manuel utilisateur

Frigidaire

Frigidaire CRA073PU11 Manuel du propriétaire

Soleus Air

Soleus Air GB-PAC-08E4 Manuel utilisateur

McQuay

McQuay MCK020A Manuel utilisateur