Arecont Vision MegaVideo Flex Series Manuel utilisateur

MegaVideo® Flex

Installation Manual

Models:

1.2 Megapixel

AV1195DN

AV1195DN-NL

1080p

AV2195DN

AV2195DN-NL

AV2196DN

AV2196DN-NL

3 Megapixel

AV3195DN

AV3195DN-NL

AV3196DN

AV3196DN-NL

5 Megapixel

AV5195DN

AV5195DN-NL

Installation Manual

Page | 2 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaVideo® Flex

Contents

Package Contents................................................................................................................................................... 3

Camera Overview.................................................................................................................................................... 6

Mounting the Sensor Unit ...................................................................................................................................... 7

Mounting the Main Unit ........................................................................................................................................ 10

Connecting the Sensor, Main Unit and Optional IR......................................................................................... 11

Reset to Factory Default ...................................................................................................................................... 12

Changing the Lens................................................................................................................................................ 12

Removing the Bubble........................................................................................................................................... 12

Attaching the Bubble............................................................................................................................................. 12

Camera Power Up................................................................................................................................................. 14

SD Card Set-up..................................................................................................................................................... 16

SD Card Tab.......................................................................................................................................................... 19

SD Card Setup via AV200................................................................................................................................... 20

Camera Discovery, Setup, and Configuration .................................................................................................. 22

Network Protocols................................................................................................................................................. 22

General Remote Focus........................................................................................................................................ 23

Refined Remote Focus......................................................................................................................................... 24

AV IP Utility Focus Tab ........................................................................................................................................ 26

Mounting Templates............................................................................................................................................. 27

Support ................................................................................................................................................................... 29

Installation Manual

Page | 3 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaVideo® Flex

CAUTION!

1. Do not attempt to service a damaged unit yourself. Refer all servicing to qualified service

personnel.

2. Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and

with all local codes and authorities having jurisdiction. Wiring should be UL Listed and/or

Recognized wire suitable for the application.

3. Always use hardware e.g. screws, anchors, bolts, locking nuts etc. which are compatible with

mounting surface and of sufficient length and construction to insure a secure mount.

Package Contents

This equipment should be unpacked and handled with care. The original packaging is the safest

container in which to transport the unit and can be used if returning the unit for service. The packaging

contains:

Installation Manual

Page | 4 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaVideo® Flex

Reference #

Description

1x Main Unit

2x Black Camera Fastening Nuts, 1x White Fastening Nut

1x Metal Sheet Bracket with Attached Plate

1x Sensor Unit

1x White Cover with Bubble

1x 5ft USB 2.0 to Micro USB 28/28 AWG, Shielded Twisted Pair Cable, No Active

Repeater

1x 40ft USB 2.0 to Micro USB 28/24 AWG, Shielded Twisted Pair Cable, No Active

Repeater

2x #6-32 1” Wood/ Metal Sheet Screw

4x #6-32 1.5” Wood/ Metal Sheet Screw

6x #6-32 1” Drywall/ Masonry Mounting Anchors

4x #6-32 1.5” Machine Screw

6x #6-32 Hex Nut

2x #6-32 1” Machine Screw

8x #6-32 Washer

1x #6-32 Hex L-key

3x Zip Ties

1x M1.2 Set Screw Driver

1x 4-position I/O connector

Installation Manual

Page | 5 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaVideo® Flex

1x Mounting Template for Main Unit

1x Mounting Template for Sensor Unit

1x CD with Manual and Software

NOTE: Make sure not to miss match sensor units and main units from different boxes if you are going

to install more than one MegaVideo Flex camera.

Warranty Information

Global (3 Year) Limited Warranty

ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each

Product shall be free from material defects in material and workmanship for a period of thirty-six (36)

months from the date of shipment (the “Warranty Period”); (b) during the Warranty Period, the

Products will materially conform with the specification in the applicable documentation; (c) all licensed

programs accompanying the Product (the “Licensed Programs”) will materially conform with applicable

specifications. Notwithstanding the preceding provisions, ARECONT VISION shall have no obligation or

responsibility with respect to any Product that (i) has been modified or altered without ARECONT

VISION’s written authorization; (ii) has not been used in accordance with applicable documentation; (iii)

has been subjected to unusual stress, neglect, misuse, abuse, improper storage, testing or connection;

or unauthorized repair; or (iv) is no longer covered under the Warranty Period. ARECONT VISION

MAKE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE,

OTHER THAN THE EXPRESS LIMITED WARRANTIES MADE BY ARECONT VISION ABOVE, AND

ARECONT VISION HEREBY SPECIFICALLY DISCLAIMS ALL OTHER EXPRESS, STATUTORY AND

IMPLIED WARRANTIES AND CONDITIONS, INCLUDING THE IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT AND THE

IMPLIED CONDITION OF SATISFACTORY QUALITY. ALL LICENSED PROGRAMS ARE LICENSED

ON AN “AS IS” BASIS WITHOUT WARRANTY. ARECONT VISION DOES NOT WARRANT THAT (I)

THE OPERATION OF THE PRODUCTS OR PARTS WILL BE UNINTERRUPTED OR ERROR FREE;

(II) THE PRODUCTS OR PARTS AND DOCUMENTATION WILL MEET THE END USERS’

REQUIREMENTS; (III) THE PRODUCTS OR PARTS WILL OPERATE IN COMBINATIONS AND

CONFIGURATIONS SELECTED BY THE END USER; OTHER THAN COMBINATIONS AND

CONFIGURATIONS WITH PARTS OR OTHER PRODUCTS AUTHORIZED BY ARECONT VISION

OR (IV) THAT ALL LICENSED PROGRAM ERRORS WILL BE CORRECTED.

For RMA and Advance Replacement information visit http://www.arecontvision.com

Installation Manual

Page | 6 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaVideo® Flex

Camera Overview

The MegaVideo Flex is the only customizable discreet multi-megapixel camera on the market to

provide interchangeable lens options with remote focus. The innovative design provides customers with

the ability to add infrared illumination (sold separately) via two ports on the main unit. Flexible lens

options include: 2.1mm, 2.8mm, 4mm, 6mm, 8mm, 12mm, and 16mm.

The camera’s small footprint gives customers the flexibility to install the MegaVideo Flex in a variety of

tight spaces such as ATM machines, gas pumps, or applications where a discreet aesthetic design is

required.

The MegaVideo Flex comprises of the camera sensor, metal mounting bracket, two (2) USB 2.0 to

Micro USB cables (40ft and 5ft), and the main unit. Installing the MegaVideo Flex is simple and can be

mounted a variety of ways.

The MegaVideo Flex cameras are available in 1.2MP, 1080p, 3MP and 5MP resolutions. The cameras

are ideal for indoor or outdoor use and delivers excellent low light imaging. For applications with bright

or over saturated lighting conditions, optional wide dynamic range delivers up to 100dB at full resolution

and is available on select 1080p and 3MP models. For applications with poor low lighting conditions,

the MegaVideo Flex 1.2MP model features NightView™, making it capable of covering areas where

very little light is present. Binning Mode increases the camera’s low light performance by combining

pixels so that more light can be collected (available on 3MP and 5MP models).

Once mounted, the operator can quickly focus and position the camera remotely, eliminating the need

to adjust the camera on-site. No more hassle individually installing multiple cameras to cover a wide

area, manually focusing lenses, or risk missing critical information.

The camera offers advanced streaming capabilities and is designed on an efficient H.264 encoding

platform capable of delivering high quality video without straining the network. Power can be supplied

via a single Power-over-Ethernet compliant network cable or with power from a 12-48V DC/24V AC

power supply.

The camera's interface allows for an intuitive, fast, and easy configuration; while the Free AV IP Utility

tool allows users to quickly configure multiple cameras at one time. The MegaVideo Flex is ONVIF

Profile S (Open Network Video Interface Forum) and PSIA (Physical Security Interoperability Alliance)

compliant, providing interoperability between network video products regardless of manufacturer.

Installation Manual

Page | 7 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaVideo® Flex

Mounting the Sensor Unit

1. Determine a secure location to mount the camera.

2. The camera can be mounted four ways: by cutting a hole and mounting the camera directly to a

metal/wood surface or by using the supplied metal mounting bracket and attaching it to a

metal/wood surface or via the ¼” 20 UNC thread, or via the MF-FMA flush mount bracket (sold

separate). Choose the best method for your installation:

a. Directly Mount Sensor to Surface: This method is for use when you have access to

the unit from behind the wall or surface. Use the supplied template or 1 7/8” hole saw to

cut a hole in the surface for the sensor. Follow the instructions in the table below:

Reference #

Description

Attach one of the two camera fastening nuts along the front edge of the camera bubble.

Insert the camera module through the front of the hole until the fastening nut is flush

with the surface.

Insert the other camera fastener nut on the back of the camera and tighten until

securely in place.

Use the supplied Hex L-key to lock the set screws on both fastening nuts in place. Do

not over torque the screws.

Note: steps may need to be reversed depending on the amount of space to tighten the fastening nut

inside the surface.

Installation Manual

Page | 8 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaVideo® Flex

b. Mounting Camera Via Metal Bracket: This method is recommended if you want to

minimize drilling holes into a surface. Follow the instructions in the table below:

Ref #

Description

1 / 2

The metal sheet bracket plate (#1) and the metal sheet bracket base (#2) should already be

attached. The bracket plate can be adjusted up or down with a Philips head screwdriver.

Attach one of the two camera fastening nuts along the front edge of the camera bubble.

Insert the camera module through the front of the hole until the fastening nut is flush with the

metal sheet bracket.

Insert the other camera fastener nut on the back of the camera and tighten clockwise until

securely in place. Use the supplied Hex L-key to lock the set screws on both fastening nuts in

place. Do not over torque the screws.

6 / 7

For Drywall/ Masonry application: Securely fasten the metal sheet bracket by first installing

2x of the #6-32 1” Drywall/ Masonry Mounting Anchors (#6), place the metal sheet bracket

opening over the Drywall Mounting Anchors and use a Philips head screwdriver and install 2x

of the #6-32 1” Wood/ Metal Sheet Screws (#7).

Installation Manual

Page | 9 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaVideo® Flex

8 / 9 /

For Metal/Wood Sheet application: Prepare surface for installation. Thread a #6-32 Washer

(#8) into each Machine Screw. Then, insert the 2x #6-32 1” Machine Screws (#10) through the

opening of the metal sheet bracket. Fasten securely with a #6-32 Hex Nut (#9) on each.

c. Directly Mount Sensor to Surface: The MegaVideo Flex can be mounted from the top

or bottom via the ¼” 20 UNC thread.

d. Flush Mount: This method is recommended for in-ceiling installations or for surfaces

you want a non-obtrusive flush mount. This method is ideal for areas you do not have

access to behind the unit upon installation.

i. Use the supplied template (provided by MF-FMA) or 2 ¾”hole saw to cut a hole

in the surface for the sensor.

ii. Screw the MegaVideo Flex camera into the MF-FMA (sold separately) in-ceiling

mount until flush with the mount rim. Tighten the set-screws surrounding the rim

of the mount if necessary.

iii. Connect the main unit to the sensor. Pull the network cable through the ceiling

and plug it into the network connector on the camera housing (Note: this can be

done at a later time if there is access to the network connector on the camera

housing after installation into the ceiling).

iv. Check that the indicator LED’s are illuminated to the desired conditions (see LED

Indicator table).

v. Push the two spring actuated retention arms to the upward position and insert the

camera through the ceiling until the retention arms lock into place.

vi. Positioning the lens toward the desired view and tighten the screws on bracket.

Installation Manual

Page | 10 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaVideo® Flex

Mounting the Main Unit

1. Determine a secure location to mount the main unit from the camera. There is a 40ft. maximum

distance from the camera to the main unit.

Mount Procedure for Drywall/Masonry Mount Procedure for Metal Application

Ref #

Description

For Drywall/ Masonry Applications

Prepare surface for installation by placing the main unit where desired and marking each of

the four the holes with a pencil.

Drill the appropriate size holes to install 4x of the #6-32 1” Drywall/ Masonry Mounting

Anchors (Ref #2) where you marked the pencil holes.

Place the holes of the main unit over the Drywall Mounting Anchors and use a Philips head

screwdriver to screw 4x of the #6-32 1.5” Wood/ Metal Sheet Screws (Ref #3).

For Metal/Wood Sheet Applications

Prepare surface for installation. Then, insert the 4x #6-32 1.5” Machine Screws (Ref #4)

through the each of the four holes on the main unit.

5 / 6

Thread a #6-32 Washer (Ref #5) into each Machine Screw and then fasten securely with a

#6-32 Hex Nut (Ref #6) on each.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Arecont Vision Caméra de sécurité

Arecont Vision

Arecont Vision MegaDomeT Manuel utilisateur

Arecont Vision

Arecont Vision D4S Series Manuel utilisateur

Arecont Vision

Arecont Vision MicroDome Manuel utilisateur

Arecont Vision

Arecont Vision MegaDome 2 Manuel utilisateur

Arecont Vision

Arecont Vision Contera Micro Bullet Manuel utilisateur

Arecont Vision

Arecont Vision SurroundVideo Omni AV12176DN-NL Manuel utilisateur

Arecont Vision

Arecont Vision AV08ZMV-300 Manuel utilisateur

Arecont Vision

Arecont Vision H.264 Day/Night SurroundVideo Series Manuel utilisateur

Arecont Vision

Arecont Vision AV2225PMIR Manuel utilisateur

Arecont Vision

Arecont Vision D4SO Series Manuel utilisateur

Arecont Vision

Arecont Vision SurroundVideo Series Manuel utilisateur

Arecont Vision

Arecont Vision MegaDome G3 Manuel utilisateur

Arecont Vision

Arecont Vision MicroDome AV2455DN-S Manuel utilisateur

Arecont Vision

Arecont Vision Contera AV02CID-100 Manuel utilisateur

Arecont Vision

Arecont Vision D4S Series Manuel utilisateur

Arecont Vision

Arecont Vision AV12ZMV-301 Manuel utilisateur

Arecont Vision

Arecont Vision SurroundVideo G5 Mini Manuel utilisateur

Arecont Vision

Arecont Vision Contera AV02CLB-100 Manuel utilisateur

Arecont Vision

Arecont Vision MicroDome G2 AV1555DN-S Manuel utilisateur

Arecont Vision

Arecont Vision MegaView v1x series Manuel utilisateur

Arecont Vision

Arecont Vision AV12975DN-NL Manuel utilisateur

Arecont Vision

Arecont Vision MegaView 2 AV1225PMIR-S Manuel utilisateur

Arecont Vision

Arecont Vision AV1215PM-S Manuel utilisateur

Arecont Vision

Arecont Vision MicroDome AV1455DN-F Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur