Arbor Technology 01945 410950 Manuel utilisateur
Phone number: 01945 410950
support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Opifex Craftsman/Jewellers Workbench
Before you commence the assembly process, we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you
have the correct components. If for any reason you need assistance, you can find our contact details
on the top of page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary for your convenience all guide holes are pre-drilled.
Package contents Tools required
1x Tabletop Spanner or battery-operated drill
2x Legs
1x Bench Peg and hand supports.
1x Bundle with fixings and necessary panels
Bundle with drawers
1x Bundle of Tool holder panels (If bought one)
Phone number: 01945 410950
support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 1
Step 2
Step 3
Step 4
Ensure that you have all the correct parts as listed on
the front page of these instructions, including any
fixings.
Take two of the provided panels and attach them just
as shown in the picture. Ensure them via provided pilot
holes using confirmat screws.
Now take 2x of the side panels and place just as shown in
the picture that the rails would match each other. Ensure
it with the confirmat screws.
After ensuring the side panels, attach one of the support
panels just as shown in the picture and secure it with the
provided confirmat screws.
Phone number: 01945 410950
support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 5
Step 6
Step 7
Step 8
Take another provided support panel and place it just as
shown in the picture, securing it with the confirmat
screws.
Repeat step 5 to secure the support panel, which is
shown in the picture.
Place the routed plank in the position shown in the
picture and ensure it with the confirmat screws.
Now rotate the workbench as shown in the picture with
side panels looking up and prepare your workbench legs
to be attached.
Phone number: 01945 410950
support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 9
Step 10
Step 11
Step 12
Before fixing the legs, please make sure that you are
fixing workbench legs in the correct places please see
numbers on the legs and match it with the numbers on
the panels. After sorting the legs out, secure them with
the confirmat screws, as shown in the picture.
After securing the parts in previous steps, please place
the backboard on the back of the workbench and knock
up all the provided nails. Now flip the workbench on its
legs and prepare to place the workbench top.
Phone number: 01945 410950
support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 13
Step 14
Step 15
Step 15.1
Underneath the workbench, you will find 3x holes which
need to be secured with the provided screws.
At this point, your workbench should look like this. Please
continue to further steps to finish assembling the
drawers.
Take two of the provided drawer panels and place them
in the same position.
Attach the drawers back panel that the cut out for the
board would be facing the same direction. And now
secure it with the confirmat screws.
Phone number: 01945 410950
support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 15.2
Step 15.3
Step 16
Step 17
Now place the drawers front panel and secure it with the
cam locks from each side. Repeat steps 15 to 15.3 to
finish assembling the drawers.
Slide the drawers baseboard as shown in the picture.
After assembling all the drawers, safely place them into
the workbench.
Don’t forget to slide in the hand supports and the
wooden pegboard to the provided holes. If you have a
tool holder shelf, please continue to step 18.
Phone number: 01945 410950
support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 18
Step 19
Assemble tool holder panel parts just as shown in the
picture and secure it with the confirmat screws.
Attach the holder on the side of the workbench as shown
in the picture and adjust it to your required height. After
finding the best place for your tool holder, secure it with
the provided screws.
Phone number: 01945 410950
support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Your Opifex Craftsman/Jewellers Workbench is now
completed!
We hope that you found your product quick and easy to assemble but if not and you require further assistance or
have any questions you can contact us via details above.
Also, you can check our YouTube channel for assemble videos, click on the link below:
https://www.youtube.com/watch?v=ACKMN7Th27c
Or
Type in YouTube search box Arbor Garden Solutions.
Attach the shelf on the side of the workbench as shown in
the picture and adjust it to your required height. After
finding the best place for your shelf secure it with the
provided screws.
Autres manuels Arbor Technology Rangement des outils
Arbor Technology
Arbor Technology Acorn Manuel
Arbor Technology
Arbor Technology Hollies Manuel
Arbor Technology
Arbor Technology Nanofex Craftsman/Jewellers Workbench Manuel utilisateur
Arbor Technology
Arbor Technology TREATED-3FT-WBP-WW-DS Manuel
Arbor Technology
Arbor Technology Artifex Craftsman/Jewellers Workbench Manuel utilisateur
Manuels Rangement des outils populaires d'autres marques
Ryobi
Ryobi RWB03 Manuel utilisateur
Husky
Husky H27CH5TR4BGK Manuel utilisateur
Scheppach
Scheppach ts 2100 Manuel utilisateur
Cornwell Tools
Cornwell Tools CTB360AKBK Manuel utilisateur
DIVERSIFIED WOODCRAFTS
DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuel utilisateur
Cassese
Cassese CS200 CART Manuel utilisateur
