Araknis Networks 920 Series Manuel utilisateur
AN-920-SW
920 Series Managed Switch Quick Start Guide
Welcome to Araknis Networks™
Thank you for choosing an Araknis 920 series managed switch. With multi-gigabit
connectivity on all network ports, updated modern aesthetics, and a managed
interface, the Araknis 920 series switch is a sleek and highly capable addition to any
network.
Series overview
Each 920 series switch comes with a power module in the box. QSFP28 and additional
power modules are sold separately.
Model Ethernet
ports
Total possible
QSFP28 ports
Total possible PoE
budget (Watts)
AN-920-SW-F-12-POE 12
1 with QSFP28
module
(sold separately)
750 with 1 power
module
1080 with 2 power
modules
AN-920-SW-F-24-POE 24
2 with QSFP28
modules
(sold separately)
750 with 1 power
module
1650 with 2 power
modules
1
Unboxing
The package contains:
Switch Rubber feet for flat
surfaces (4)
Rack mount kit:
ears (2), screws
(8)
Quick Start
QRcard
AC power cord Power module
2
Install the modules
Caution: -.The switch must be powered off when installing QSFP28 modules.
Power module QSFP28 module
Note: -__.To remove the power module, push the tab toward the handle and pull the
module straight back.
Caution: -.Do not use a Y power cable. Sometimes called a Ysplitter cable.
Pro Tip: -_Connect each power module to separate circuits in the same phase. Use a
separate UPS for each power cable.
3
Installing the switch
Rack mount Shelf mount
Caution: -.To avoid possible interference or damage, do not stack equipment on top
of the switch.
Rack mounting guidelines
lThe maximum ambient temperature of the space the switch is installed in should
not exceed 122°F/50°C.
lThere should be air flowing through the rack.
lMake sure all the leveling feet or casters are adjusted correctly and they come in
contact with the supporting surface. Always load heavier equipment at the
bottom of the rack.
lMake sure the rack is grounded and the equipment is surge protected.
4
Connections
Caution: -.All router and switch connections should be on network ports. Not the
management port.
QSFP28 ports
The QSFP28 (Quad Small Form-Factor Pluggable Plus) ports support up to a 100Gbps
connection and are typically used to connect switches.
6
PoE Budgeting
Total PoE device consumption = 47
Model Total PoE budget (Watts)
Remaining
PoE budget
(Watts)
AN-920-SW-R-12-POE 750 with 1 power module 703
1080 with 2 power modules 1033
AN-920-SW-R-24-POE 750 with 1 power module 703
1650 with 2 power modules 1603
7
LED States
RJ45 ports
LED LEDstate Description
10G/PoE
Blinking The port is negotiated at 10 Gbps and/or providing PoE*
Off The port is not negotiated at 10 Gbps and/or providing
PoE*
Link/Act
Blinking Packets are flowing through the port
Off The port does not detect connection or the port is
disabled
*Configurable in the web interface
8
QSFP28 module LEDs
LED LED
state Description
100G Blinking The port is negotiating at 100 Gbps and passing traffic
Off The port does not detect a connection or is disabled
50/25G Blinking The port is negotiating at 50-25 Gbps and passing
traffic
Off The port does not detect a connection or is disabled
9
Configuration
Araknis switches can be configured through OvrC or the local interface. The local
interface is accessible using OvrC’s WebConnect feature, typing the switch’s DHCP
address into your browser’s address bar, or using the switch’s default IP address.
Configuring the switch in OvrC
OvrC provides Wi-Fi management, remote device management, real-time notifications,
and intuitive customer management, using your computer or mobile device. Setup is
plug-and-play, with no port forwarding or DDNS address required.
To add this device to your OvrC account:
1. Connect the switch to the internet.
2. Log into OvrC (www.ovrc.com).
3. Scan the site using an OvrC Pro
device or add the switch manually by
entering the MAC address and
Service Tag.
Logging in to the local interface
Log into the switch using the default credentials. You must update the credentials after
initial login.
Username araknis
Password araknis
10
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Araknis Networks Changer
Araknis Networks
Araknis Networks 210 Series Manuel utilisateur
Araknis Networks
Araknis Networks 300 Series Manuel utilisateur
Araknis Networks
Araknis Networks 100 Series Manuel utilisateur
Araknis Networks
Araknis Networks 210 Series Manuel utilisateur
Araknis Networks
Araknis Networks 210 Series Manuel utilisateur
Araknis Networks
Araknis Networks AN-210-SW-C-8-POE Manuel utilisateur
