Method of use
!
Fill pitcher with warm water, soak 10~30mins before fist
use so that the electrode can be activated for best working conditions.!
!
1. Fill pitcher with drinkable water, cover with the cap. !
!
2.Connect USB cable to power adapter and charge port located on the power supply
base. Plug power adapter into wall.!
!
3. Put the pitcher on the power supply base to start process. The buzzer will get a
“DI~~” alarm and colorful indicator light will flash. Device has started working.
Process will run for 1 hour with the first 15 minutes being a strong electrolysis mode
which will produce high H2 concentrated water. The last 45 minutes is a weaker
electrolysis which keep H2 in the water.
!
4. when use the device, unplug the adapter from the electric socket, or remove
pitcher from power supply base. !
!
!
Notice:
Sometimes there will be a small amount of waste water that flows from the ozone
(O3) outlet, please wipe off the water.!
!
Don’t switch on the device if there is no water in the container.