Apollo RIGHT ARM 3 Manuel utilisateur

Pan and Tilt System
RIGHT ARM®3


1
Apollo Design Technology, Inc. 260.497.9191 • ApolloDesign.net
Table 0f Contents
Introduction ��������������������������������������������������������������������������������������������������������������������������������������������������������������������2
Product Description ������������������������������������������������������������������������������������������������������������������������������������������������2
Safety������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������3
Compatible Fixtures������������������������������������������������������������������������������������������������������������������������������������������������4
Installation
Install Connectors �������������������������������������������������������������������������������������������������������������������������������������������������������5
Hang the Right Arm®�����������������������������������������������������������������������������������������������������������������������������������������������6
Attach a Fixture�������������������������������������������������������������������������������������������������������������������������������������������������������������7
Balance the Fixture����������������������������������������������������������������������������������������������������������������������������������������������8-9
Data Cable���������������������������������������������������������������������������������������������������������������������������������������������������������������������10
Operation
Menu Tree v1�8������������������������������������������������������������������������������������������������������������������������������������������������������������11
Channel Assignments and Reset Channel����������������������������������������������������������������������������������������� 12
Data Pass-through��������������������������������������������������������������������������������������������������������������������������������������������������� 12
Loss of DMX������������������������������������������������������������������������������������������������������������������������������������������������������������������ 12
DMX Output and 24vDC/Data Accessory Output����������������������������������������������������������������������� 13
Power Up ���������������������������������������������������������������������������������������������������������������������������������������������������������������������� 13
Specications������������������������������������������������������������������������������������������������������������������������������������������������������14-15
Warranty �������������������������������������������������������������������������������������������������������������������������������������������������������������������������16
BOX CONTENTS
1 – RightArm®
1 – Pipe Clamp
1 – M-16 x 30 Hex-head Bolt with 1 Flat and 1 Lock Washer
2 – Safety Cables
1 – User Manual
Optional Parts: See the RightArm®at ApolloDesign.net

2
Apollo Design Technology, Inc. 260.497.9191 • ApolloDesign.net
Introduction
Product Description
Congratulations on the purchase of your Right Arm® pan and tilt system. With
the Right Arm
®
it is simple to add pan and tilt capabilities to a wide variety of
static lighting, video and projection devices. The patented design is cost-effective,
dependable and easy to use.
Silent, accurate, user-dened movements and repositioning capabilities from the
lighting console provide the reliability and exibility needed to use one xture for
multiple applications.
Since 1992, Apollo Design Technology, Inc. has been one of the world’s leading
innovators, manufacturers and distributors of gobos, color lters, lights and related
equipment and accessories for the lighting industry.
We are continually engineering new products to help you create and execute
the designs of your dreams for theaters, bands, advertising, touring companies,
television, motion pictures, museums, retail and architecture.
Apollo Design is recognized for creating innovative and award-winning products of
superior quality and value. Focused on you, our goal is to ensure unparalleled support
from the initial conversation to after sales service.
Our lighting experts and engineers will consult with you on ways to use our standard
products or engineer custom solutions. Allow your imagination to run free. Let the
Apollo Design team help you create the lighting design you only imagined.
There is virtually no limit to what we can do together.
Joel Nichols, Owner/CEO
Apollo Design Technology

3
Apollo Design Technology, Inc. 260.497.9191 • ApolloDesign.net
Safety Information
CAUTION! This symbol designates an item that will cause damage
to the Right Arm®if ignored.
WARNING! This symbol designates an item that could cause injury or
death if ignored.
• Be sure to read and understand all instructions in this manual.
• The Right Arm®is designed for indoor applications and should not be exposed
to moisture.
• There is a risk of re, shock or injury if the Right Arm®is not used as specied.
• Servicing the Right Arm®should be undertaken by qualied personnel only.
• The Right Arm®is not intended for residential use.
• Safety cables must be used when installing the Right Arm®. Apollo is not
responsible for damage or injury resulting from improper use of safety cables.

4
Apollo Design Technology, Inc. 260.497.9191 • ApolloDesign.net
Compatible Fixtures
The Right Arm®can accommodate xtures which are 17.3" W x 22" H x 36" D
and do not exceed 40 lbs.
Maximum Fixture Dimensions
36" (914mm) deep
22" (580mm)
17.3" (440mm)
Compatible xtures include:
• LED Fixtures
• PAR Fixtures
• Ellipsoidal Fixtures
• Fresnel Fixtures
• Snow Machines
• Projectors
• Video Cameras
CAUTION! The Right Arm®is designed for use with xtures that do not
exceed 40 lbs.

5
Apollo Design Technology, Inc. 260.497.9191 • ApolloDesign.net
Install connectors as follows
Brown wire = Hot
Blue wire = Neutral
Green/Yellow wire = Ground
• Observe proper grounding on all power connectors.
• Both male connectors are used as the disconnect device and should be
accessible after the installation of the Right Arm®has been completed.
• There are two cables for control and two cables for power.
• DMX control In and Pass-through use ve-pin XLR connectors.
Power to the Devices – The second power cable enters the top of the unit and
passes through the Right Arm®exiting at the tilt shaft. This cable is used to power
devices attached to the Right Arm®. This cable has 16 gauge conductors and can
be plugged into a dimmed or non-dimmed source to power xtures up to 15 amps.
Installation
Install Connectors
CAUTION!
Power to the Right Arm®– The power cable marked “Do NOT Plug
Into Dimmed Sources” is used to provide power to the Right Arm®
electronics. This cable must be plugged into a non-dimmed electrical
source 100-240 volts. Plugging this cable into a dimmed electrical source
will void the warranty.

6
Apollo Design Technology, Inc. 260.497.9191 • ApolloDesign.net
• Securely attach the Right Arm®with the clamp provided.
• Position the power box to t inside of the dotted lines on the Right Arm®label.
•
Position the clamp with the pipe bolt facing towards the Right Arm
®
rail handles.
• Hang vertically with the clamp on top or bottom.
Installation
Hang the Right Arm®
CAUTION! The Right Arm®is not designed to hang horizontally.
WARNING! Securely tighten bolt that fastens the clamp to the
Right Arm®. Use the safety cable provided to prevent the unit
from falling in the event the hanging clamps or brackets fail.

7
Apollo Design Technology, Inc. 260.497.9191 • ApolloDesign.net
• Remove any clamps or other hanging brackets from the xture being installed
on the Right Arm®.
• Bolt the xture’s yoke to the top of the tilt arm. There are seven holes in the
tilt arm. Use the hole that is closest to the inside corner of the Right Arm®
and allows operation of all parts of the xture. Use lock nuts or lock washers
(not provided). For single hole use 1⁄2" bolt; double hole use 3⁄8" bolt.
• Connect the safety cable to the xture according to the xture
manufacturer’s instructions.
• The safety cable must pass through the hole on the tilt shaft and around
the pipe or truss. When attaching the safety cable, keep in mind the range
of motion necessary for the Right Arm®to operate properly and adjust the
length and/or placement of the cable accordingly.
• Connect the lamp power cable to the wire that exits at the tilt shaft.
• Secure the lamp power cable so it does not interfere with the tilt motion.
Installation
Attach a Fixture
WARNING! Attach the safety cable.
Holes to Attach
Fixture on Tilt Arm.

8
Apollo Design Technology, Inc. 260.497.9191 • ApolloDesign.net
Installation
Balance the Fixture
The tilt arm height and angle
provide two adjustment points
for balance.
Height – the height is adjusted
by the tilt height adjustment bolt.
Loosen the bolt to adjust for
different height xtures. The initial
adjustment should be set so the
tilt axis of the xture is at the
same height as the tilt bolt.
Tilt Arm
Angle
Adjustment
Bolt
Tilt Height
Adjustment
Bolt
93⁄4"
(250 mm)
Tilt Axis
Fixture
Yoke Tilt
Axis
Tilt
Height
Adjustment Bolt
ETC Source Four Ellipsoidal
ETC Yoke Measures 93⁄4"
Adjust Tilt Arm to 93⁄4"
93⁄4"
(250 mm)
Table des matières
Autres manuels Apollo Support et étagère
Manuels Support et étagère populaires d'autres marques

Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn
Fohhn VAT-09 Guide de l'utilisateur

ricoo
ricoo FS0522 Manuel utilisateur

AMSOIL
AMSOIL BMK-22 Guide rapide

Kargo Master
Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur















