Apera Instruments SX610 Manuel utilisateur

V2.3

SX610 pH-Meter Instruction Manual

1. Brief Introduction

Thank you for purchasing the Apera Instruments SX610 pH Pen Tester. This tester performs quick & reliable pH measurements

with a single-button. The slim-bodied tester is a cost-effective choice for your regular pH testing including: hydroponics,

aquaculture, water treatment, pools & spas, brewing, etc. The pH probe is replaceable and suitable for test tube measurements.

2. Specifications

1) pH Range: 0 to 14.0 pH

2) Resolution: 0.1 pH

3) Accuracy: ± 0.1 pH, ±1 digit

4) Automatic Temperature Compensation (ATC): 0-60ºC (32-140°F)

5) Automatic calibration: 1-point calibration (pH 7.00)

6) Power: CR2032 Cell Batteries x 2

7) Dimension and Weight: 148*29*14mm/49g

8) Waterproof rating: IP57

3. Instructions

1) Calibration: Rinse the probe in distilled water and dry it with a tissue (never wipe the glass bulb). Dip the probe

in the standard buffer solution pH7.00. Stir gently, hold still, and wait for a stable reading to appear and stay. Then

long-press the CAL button for >two seconds until CAL appears on the screen. When the calibration value 7.0 flashes,

the calibration will finish after a few seconds. The meter will then return to measurement mode with the icon

appearing on the screen.

2) Measurement: Rinse the probe in distilled water and dry it. Dip the probe in the sample solution. Stir gently and

wait for a stable reading to appear and stay.

3) Temperature Unit Selection: Long press CAL button when meter is off.

4) Storage: After measurement, rinse the probe with distilled water and dry it with a tissue. Put the protection cap

back on the electrode. It’s a good practice to pour a small amount of the 3M KCL storage solution (provided in the

purchased kit) into the protection cap when storing the meter. This will help ensure the accuracy of the pH probe.

4. Notes

1) The instrument can typically be used for 1 to 2 weeks before recalibrating.

2) To ensure the reliability of calibration, pH standard buffer solution should be replaced once it becomes

contaminated (after 10-15 uses).

3) Maintenance is necessary for the tip of the probe because it can become contaminated after long-term usage. In

order to maintain the probe, wash the tip with soapwater and a light brush. Then rinse the bulb with distilled water.

4) The typical service life of the pH electrode is about 1-2 years. When the icon “Err” appears on the screen or the

quickness and accuracy are far off, please replace the probe with a new one. The replacement probe’s model

number is SX615. Please go to support.aperainst.com to watch a tutorial video for how to replace the pH probe.

5) The instrument will automatically power off after 10 minutes being unused.

6) Replace the batteries when appears on screen.

V2.3

5. Warranty

We warrant this instrument to be free from defects in material and workmanship and agrees to repair or

replace free of charge, at option of APERA INSTRUMENTS, LLC, any malfunctioned or damaged product

attributable to responsibility of APERA INSTRUMENTS, LLC for a period of two years from the delivery (a

six-month limited warranty applies to probes). This warranty does not apply to defects resulting from

actions such as misuse (violation of the instructions in this manual or operations in the manner not

specified in this manual), improper maintenance, and unauthorized repairs. Warranty period is the time

limit to provide free service for the products purchased by customers, not the service life of the tester or

probe.

APERA INSTRUMENTS, LLC

Address: 6656 Busch Blvd, Columbus, Ohio 43229

Tel: 1-614-285-3080

Email: info@aperainst.com

Website: www.aperainst.com

Table des matières

Autres manuels Apera Instruments Instrument de mesure

Apera Instruments

Apera Instruments LabSen 751 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 211 Manuel utilisateur

Apera Instruments

Apera Instruments PH60Z-MS Manuel utilisateur

Apera Instruments

Apera Instruments 9500 Premium Series Manuel utilisateur

Apera Instruments

Apera Instruments PH60 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 821 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 241-3SP Manuel utilisateur

Apera Instruments

Apera Instruments DO8500 Manuel utilisateur

Apera Instruments

Apera Instruments SX811-SS Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 221 Manuel utilisateur

Apera Instruments

Apera Instruments TN420 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 801 Manuel utilisateur

Apera Instruments

Apera Instruments SX725 Manuel utilisateur

Apera Instruments

Apera Instruments PC 8500 Manuel utilisateur

Apera Instruments

Apera Instruments PC 850 Manuel utilisateur

Apera Instruments

Apera Instruments GroStar AI101G Manuel utilisateur

Apera Instruments

Apera Instruments PC60 Manuel utilisateur

Apera Instruments

Apera Instruments TN400 Manuel utilisateur

Apera Instruments

Apera Instruments Premium Series Manuel utilisateur

Apera Instruments

Apera Instruments PH60Z-PW Manuel utilisateur

Apera Instruments

Apera Instruments EC700 Manuel utilisateur

Apera Instruments

Apera Instruments SX811-PW Manuel utilisateur

Apera Instruments

Apera Instruments WS100 Manuel utilisateur

Apera Instruments

Apera Instruments SX721 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur