Apantac CLN-SW-6x1-M Manuel utilisateur
HDMI-8x8
APANTAC LLC, 7470 SW BRIDGEPORT ROAD, PORTLAND, OR 97224
INFO@APANTAC.COM, TEL: +1 503 968 3000, FAX: +1 503 389 7921
CLN-SW-6x1-M
User Manual
CLN-SW-6x1-M
APANTAC LLC, 7470 SW BRIDGEPORT ROAD, PORTLAND, OR 97224
INFO@APANTAC.COM, TEL: +1 503 968 3000, FAX: +1 503 389 7921
1
Copyright and Trademarks:
All rights reserved by APANTAC LCC, Portland, Oregon, USA. No part of this document
may be reproduced in any form or by any means without written permission from the
product manufacturer. Changes are periodically made to the information in this document.
They will be incorporated in subsequent editions. The product manufacturer may make
improvements and /or changes to the product described in this document at any time.
All the registered trademarks referred to this manual belong to their respective
companies.
CLN-SW-6x1-M
APANTAC LLC, 7470 SW BRIDGEPORT ROAD, PORTLAND, OR 97224
INFO@APANTAC.COM, TEL: +1 503 968 3000, FAX: +1 503 389 7921
2
Table of Contents
1.0!WHAT’S IN THE BOX? ................................................................................................ 3!
2.0!Features ................................................................................................... 3!
3.0!Specifications ........................................................................................... 4!
4.0!Front/Rear Panels ..................................................................................... 5!
4.0.1!Front Panel................................................................................................................... 5!
4.0.2!Button Descriptions..................................................................................................... 5!
4.0.3! Rear Panel .................................................................................................................. 7!
5.0! Connections ............................................................................................................... 9!
5.1! I/O Connections ........................................................................................................ 9!
5.1.1! Output LED................................................................Error! Bookmark not defined.!
5.2! IR Pass-Through Connection..................................Error! Bookmark not defined.!
5.3! IR EXT Connection.................................................................................................. 10!
5.4! Remote Communications ....................................................................................... 11!
5.5! LAN Connection ....................................................................................................... 11!
5.6! Serial Communication............................................................................................. 12!
HDMI-8x8 Matrix Switch
3
1.0 WHAT’S IN THE BOX?
CLN-SW-6x1-M Switch
RS-232 Communication Connecting Cable
Power Cord
IR Extender
Female 1x5 screw terminal
IR Remote Control
Rack Ear Screws
2 Rack-Mount Bracket
2.0 Features
§ Seamless switching with different resolutions
§ Multiple different types of inputs VGA, YPbPr, DVI or HDMI
§ Up/down/cross converter with VGA, YPbPr, DVI and HDMI inputs with HDMI,
VGA and audio ouptuts..
o Supports 1080i to 1080P conversion
o Suppports VGA to 1080P upconversion
CLN-SW-6x1-M
APANTAC LLC, 7470 SW BRIDGEPORT ROAD, PORTLAND, OR 97224
INFO@APANTAC.COM, TEL: +1 503 968 3000, FAX: +1 503 389 7921
4
o Supports 1080P@60 to 720P@60 down conversion
o Supports 576i@50 to 1080P@60 cross conversion
§ Output resolution up to 1080P
§ Supports 2 aspect ratio modes
o 1:1 – retains the original input aspect ratio
o Full – Always stretch the input image to fit the output aspect ratio
§ Cascadable control via RS-485
§ Supports both HDMI and VGA outputs
§ RS-232 serial control
§ Ethernet (web interface) control
§ Discrete audio input and output
§ IR remote control
§ EDID management (copy from output port to the 3 HDMI inputs)
§ HDCP compliant
3.0 Specifications
Function
CLN-SW-6x1-M
Modular Input cards
1 x VGA, 1 x YPbPr, 1 x DVI, 3 x HDMI
Output Connector
1 x HDMI Type A, 1 x VGA DB15
RS-232 Connector
DB9 Female
LAN Connector
RJ-45
RS-485 connector
2
Audio Port
1 x audio output, 4 audio inputs
2 pin dip switch
1
8 pin dip switch
1
Power
90 VAC – 250 VAC, 50/60Hz
Weight
4 kg
Dimension
440 x 240 x 44 mm
Maximum resolution
1080P@60Hz
Maximum Pixel Clock
225 MHz
HDMI cable distance
10 meters
Baud rate
9600 bps; 8 data bits, 1 stop bit, no parity
Ethernet protocol
HTTP, DHCP, TCP/IP, ICMP (ping)
Program control
Web server, GUI application
Serial control port
RS-232 (DB9), RS-485 (1x5 screw terminal)
Remote control
Portable remote control, IR receiver/blaster
CLN-SW-6x1-M
APANTAC LLC, 7470 SW BRIDGEPORT ROAD, PORTLAND, OR 97224
INFO@APANTAC.COM, TEL: +1 503 968 3000, FAX: +1 503 389 7921
5
Web server
LAN, RJ-45
4.0 Front/Rear Panels
4.0.1 Front Panel
Figure 4-1 CLN-SW-6x1-M Front Panel
4.0.2 Button Descriptions
• Button 1: VGA + audio
• Button 2: YPbPr + audio
• Button 3: DVI + audio
• Buttons 4 ~ 6: HDMI inputs (4, 5 and 6)
• Aspect Ration
Full
Figure 4.2: Aspect ratio Full
1:1
Figure 4.3: Aspect ratio 1:1
CLN-SW-6x1-M
APANTAC LLC, 7470 SW BRIDGEPORT ROAD, PORTLAND, OR 97224
INFO@APANTAC.COM, TEL: +1 503 968 3000, FAX: +1 503 389 7921
6
Figure 4.4: Aspect ratio 1:1
• Resolutions: To set the output resolution to 720P or 1080P
• IR: IR receiver can receive signals from the remote control
HDMI-8x8 Matrix Switch
6
4.0.3 Rear Panel
Figure 4-5 CLN-6x1-M Rear Panel
- Power: 90 to 250 50/60Hz
- IR Rx: Used to connect the IR receiver cable for IR control
- IR EXT port: This is used to connect the IR receiver cable for the matrix
remote control
- Input: HDMI 1~4
- Output: RJ-45 (1~4). HDBT-1-Rs-II-POE receiver is needed on each
output
- RS-232: Remote control or GUI over serial communication.
- RS-485: Allow multiple units to be controlled.
- LAN: Access the web server
- DIP Switch 8 pin and 2 pin DIP switches for configuration
8 pin DIP Switch
• Pins 1-5: ID
• Pin 6: Master/slave
• Pin 7: RS-232/LAN
• Pin8: IP Reset
2 pin DIP switch (RS-485 termintor): RS-485 terminator for On/Off
- VGA output: The resolution will match the HDMI output
- Audio output: Can be connected to the speakers
- HDMI output: Output is encrypted with HDCP
CLN-SW-6x1-M
APANTAC LLC, 7470 SW BRIDGEPORT ROAD, PORTLAND, OR 97224
INFO@APANTAC.COM, TEL: +1 503 968 3000, FAX: +1 503 389 7921
8
- Inputs 1~6 modular cards
o Input 1: VGA + audio
o Input 2: YPbPr + audio
o Input 3: DVI + audio
o Inputs 4 ~ 6: HDMI inputs (4, 5 and 6)
VGA E-DDC assignment
DVI connector assignment
HDMI Type A connector assignment
CLN-SW-6x1-M
APANTAC LLC, 7470 SW BRIDGEPORT ROAD, PORTLAND, OR 97224
INFO@APANTAC.COM, TEL: +1 503 968 3000, FAX: +1 503 389 7921
9
Audio inputs ports: VGA, YPbPr and DVI inputs can be companied with discrete
audio inputs
5.0 Connections
Figure 4.6: Connection diagram
5.1 I/O Connections
Use a HDMI cable to connect any HDMI devices to the Matrix. Use a CATx cable to
connect the HDBT-1-Rs-II-POE to the output (RJ-45)
Table des matières
Autres manuels Apantac Changer
